Epson Projector Emp 3500 User Manual

least three seconds. To clear the option menu from the screen, press
Menu again. The tables below describe the option menu settings
available for each image source.
Note: See Changing Menu Settings” on page 32 for details on selecting
and changing a menu item setting.
Computer image option menuRED
GREENBLUE
PICTURE1 2
LANGUAGEE  J
Menu ItemDescription
REDAdjusts red level strength
GREENAdjusts green level strength.
BLUEAdjusts blue level strength.
PICTURESpecifies image sharpness. 1 enhances color images...

Video image option menuPICTURE1 2
LANGUAGEE J
MODEAUTOMenu ItemDescription
PICTURESpecifies image sharpness. 1 emphasizes edges and 2
de-emphasizes edges.
LANGUAGEE = English, J = Japanese, D = German, F = French,
S = Spanish, I = Italian. Languages scroll in the following order:
MODESpecifies the video format setting: Auto, NTSC, PAL, or SECAM.
See “Connecting to a Video Source” in Chapter 1 for more
information.
Using the Option Menus37 

Using Projector Setups
You can store projector setup parameters for up to six sources (three
for computer image sources and three for video image sources) for
instant recall when you need them. These setups remain in memory
even when you turn off the projector. The settings available for you to
save depend on the currently selected image source, as described below.
When the projector is using the computer as its image source, you can
change and save these settings:•Comp sync (control panel setting)
lComp...

Storing a setup
Important! Saving new settings in a memory area automatically replacesany settings previously stored in that memory area.
1.Use the Preset button on the control panel to choose the memory
area where you want to store your projector settings. The status
light indicates the currently selected memory area (1, 2, or 3).
Pressing the Preset button changes the selected memory area (or
turns off the projector setup feature) in this sequence:
2.While the status light for the memory area you want...

Recalling a setup
Important! Recalling a setup replaces your current projector settings with
the settings that were saved in memory.
Use the Preset button on the control panel to select the memory area
that contains the settings you want to recall.
Clearing a setup
When you don’t want a preset projector setup anymore, you can clear
its memory area. This removes your settings from the memory area and
replaces them with the projector’s default settings. To clear a preset
setup, follow these steps:1.Use the...

MaintenanceTheprojector needs little maintenance. You should keep the lens
clean, because any dirt or smears appear on the screen. You also need
to periodically clean the air filter at the bottom of the projector.
Cleaning the air filter is important, because a clogged air filter can
block ventilation needed to cool the projector and keep it from
overheating. Before you clean any part of the projector, always turn off
the projector and unplug the power cord.
The only parts you should replace are the lamp...

Warning: Never open any cover on the projector, except the lamp and
filter covers. Dangerous electrical voltages in the projector can injure you
severely. Do not try to service this product yourself except as specifically
explained in this Owners Manual. Refer all servicing to qualified service
personnel.
Cleaning the Lens
Clean the lens whenever you notice dirt or dust on the surface. Lightly
wipe the lens surface with a soft, dry, lint-free cloth. To remove dirt or
smears on the lens, moisten a soft...

Cleaning the Air Filter
Clean the air filter at the bottom of the projector after every 100 hours
of use. If it is not cleaned periodically, it can become clogged with
dust, preventing the projector from being ventilated properly. This can
cause overheating and damage the projector. To clean the air filter,
follow these steps:1.Turn off the projector and unplug the power cable from the wall
outlet.
2.Turn the projector so that its handle is on top so you can access
the filter easily.
Caution: Stand the...

4.The filter is attached to the other side of the filter cover. It is
recommended that you use a small vacuum cleaner designed for
computers and other office equipment to clean the filter. If you
don’t have one, use a dry, lint-free cloth.
If the dirt is difficult to remove or if the filter is torn, replace it.
Contact your ELP dealer or call EPSON Accessories
(800-873-7766 in the United States) to obtain a new one. Be sure
to request part number 1023658.
5. Replace the filter.
6.Reconnect the power cord...

3.Use a screwdriver, coin, or similar object to loosen the two
retaining screws on the lamp cover. You cannot remove these
screws.
4.When the screws are loose, lift off the lamp cover.Replacing the Lamp45