Epson Projector Emp 1815 User Manual

Cases Like These
71
The following table shows the functions of each button.
C
After you finish checking, click the   button at 
the top right of the window to close the scenario 
preview screen.
Setting Animations
The following PowerPoint animations are reflected in a scenario as well.
Fly Blinds Box Checkerboard
Crawl Dissolve Peek Random Bars
Spiral Split Stretch Strips
Swivel Wipe Zoom
You can set which animations replace those not mentioned above 
(Default: Cut).A
Start EMP SlideMaker2.Click the...

Cases Like These
72
Setting the Slide Animation
With EMP SlideMaker2, you can set effects similar to the animation 
effects of PowerPoint for each cell in the scenario. You can project the 
slides that retain the animation set in PowerPoint by setting projection 
time or animation for each divided scene.
In this case, right-click the target animation in the animation check 
window and click Cell Properties.
A
Right-click in the target cell or the animation,
and select Cell Properties.When making the same...

Cases Like These
73
B
The Properties screen is displayed. Set each of 
the items with reference to the following table, and 
then click the OK button.Advance
When Automatically after is selected, you can set 
the switching time from 0 to 1800 seconds. When 
On mouse click is selected, switch slides by 
pressing the []] or [[] buttons on the remote 
control during projection.
Animation 
Effects
You can specify the effects to use during screen 
transition.
Select the Direction depending on the animation...

AppendixConnection Limitations ...................................... 75
 Supported Resolutions ......................................................75
 Display Colour ...................................................................75
 Connection Number ..........................................................75
 Others .................................................................................75
Troubleshooting .................................................. 76
Glossary...

75
Connection LimitationsWhen projecting computer images during execution of EMP NS 
Connection, the following restrictions apply. Confirm these points.Supported Resolutions
The following computer screen resolutions can be projected. For the 
following resolutions, the image can be projected as it is on the computer 
screen. You cannot connect to a computer with a resolution higher than 
UXGA.* Supported resolutions when multi-screen display function is on.When the following messages are displayed,...

76
TroubleshootingIf any of the following problems occur, refer to the pages given for 
each problem.
Problems concerning EasyMP
f
Suddenly changes to the EasyMP screen sp.77
f
Cannot connect to other computers when projecting in 
Network Presentation sp.77
f
The projector is not found when EMP NS Connection is 
started sp.78
f
Cannot connect in Advanced Connection Mode or wired LAN 
connection sp.79
f
The image and sound for movies in Network Presentation 
are not displayed, or the image is slow to...

Troubleshooting
77
f
Suddenly changes to the EasyMP screen
ERR at the bottom left of the screen: Check the numbers and make the following remedies.
f
Cannot connect to other computers when projecting in Network Presentation
ERR Number
Error Meaning
Remedy
2,50,53,245,-103
Failed to startup EasyMP.
Turn the power for the projector off and then back on again.
51,52,100
Failed to process EasyMP.
When using EMP NS Connection, reconnect EMP NS
Connection.
When using a USB display, reconnect the USB cable....

Troubleshooting
78
f
The projector is not found when EMP NS Connection is started
Check
Remedy
Is the wireless LAN unit connected?
Check that the wireless LAN unit is securely connected.
Is the projector’s configuration menu open?
While the configuration menu is displayed, network connection becomes invalid. Close the configuration 
menu and return to the EasyMP screen.
Are the computer’s LAN card and the built-in LAN 
function available?
Check that LAN is valid by checking Control Panel - System in the...

Troubleshooting
79
f
Cannot connect in Advanced Connection Mode or wired LAN connection
f
The slide show cannot be displayed on the desired display when the multi-screen display function is being executed. 
f
Applications are no longer displayed from the computers screen when the multi-screen display function is executed. 
f
The mouse cursor is not displayed on the computers screen. 
Check
Remedy
Is the ESSID setting different.
Set the computer, the access point, and the projector to the same ESSID....

Troubleshooting
80
f
The image and sound for movies in Network Presentation are not displayed, or the image is slow to appear
f
PowerPoint slide show does not work in Network Presentation
f
The screen is not updated when Office applications are used with Network Presentation
f
Cannot specify files with EMP SlideMaker2
Check
Remedy
Did you try to play back movies with Media Player or 
try to operate the screen saver preview?
Depending on the computer, the movie play back screen in Media Player may not be...