Epson Projector Emp 1815 User Manual

21
Preparing the ComputerPutting the Computer into Network Connection Status
To use a computer on a network LAN you need to make certain settings.
If the settings have already been made, the following settings are not 
necessary.
For Windows
Make connection settings for the computer by using the utility software 
supplied with the LAN card. For more information on the utility software, 
see the user’s guides supplied with your LAN card.
For Macintosh
This section explains how to make settings for the...

22
Connecting in Wireless LAN Advanced Connection ModeStarting EMP NS Connection from the Computer
In the following explanations, unless otherwise noted, Windows screen 
shots are used.
You see a similar screen even when using Macintosh.
For Windows
Select Start - Programs (or All Programs) - EPSON 
Projector - EMP NS Connection.
For Macintosh
A
Click the communication icon at the top right of the 
computer screen, and check that the following is 
displayed.
B
Double-click the Applications folder of the...

Connecting in Wireless LAN Advanced Connection Mode
23
fEMP NS Connection screen
When EMP NS Connection is started, the following screen is displayed.
Connecting to the Projector
A
Click Automatic search.The projector’s search results are displayed.
When the projector you want to connect to is not displayed
sp.25
Automatic search: This searches for all projectors currently 
connected to the network. 
Manual search: This searches for a specific projector. 
Profile: This searches for a projector using a...

Connecting in Wireless LAN Advanced Connection Mode
24
B
Select the projector you want to connect to. You can 
connect up to four projectors at the same time.
C
Click the Connect button.
D
When Projector Keyword is set to ON, enter the 
projector’s keyword when the projector’s EasyMP 
screen is displayed and click the OK button.A computer and the projector are connected via a network and the 
computer’s screen is displayed.
The EMP NS Connection toolbar is displayed on 
the computer screen. Use this...

25
When the Projector you want to Connect to is not DisplayedFor reasons such as the following, there are times when the projector 
you want is not displayed in the EMP NS Connection’s projector 
selection screen.
 The electromagnetic waves for the wireless LAN are out of range or 
weak.
 The network’s subnet is different.
In this case you can search by using Manual Search or Profile.
You can search by specifying the projector’s IP address or the 
projector’s name when using Manual search in Advanced...

When the Projector you want to Connect to is not Displayed
26
B
Enter the IP address or the projector name for the 
projector you want to connect to, and click the OK 
button.Projector information is added to the EMP NS Connection’s 
projector selection screen. 

27
Registering a Profile for a Projector that is Used FrequentlyYou can save projector information (projector name, IP address, and 
ESSID) as a profile. By creating a group of files for each place where a 
projector is setup and managing them with folders, the target projector 
can be found quickly.
This section explains how to create and edit a profile.Making a Profile
Profiles are made by saving searched results. You can manage profiles by 
creating a folder. For more details on editing the hierarchy,...

Registering a Profile for a Projector that is Used Frequently
28
B
Enter a profile name and click the Add button.After entering the profile name and selecting the save destination, 
click the Add button because the following screens are displayed 
when a profile has already been created.
For WindowsFor Macintosh
Projector information is registered in the profile
.
q
You can make and save folders under Profile Summary. 
For instructions on making a folder, see Managing a 
Profile 
s
p.29. 

Registering a Profile for a Projector that is Used Frequently
29
Searching by Specifying a Profile
You can search by specifying the profile you created.A
Click Profile on the EMP NS Connection’s
projector selection screen.If no profile is registered, you cannot select Profile.
B
From the menu that is displayed, select the 
projector you want to connect to.Projector information is added to the EMP NS Connection’s 
projector selection screen.
Managing a Profile
You can change the name and the hierarchical...

Registering a Profile for a Projector that is Used Frequently
30
B
Click the Edit profile button.The profile management screen is displayed.
C
Edit the contents registered in the profile.
 
 : Indicates a folder.
 : Indicates a profile.
Profile
You can display the registered profile. You can manage 
it by creating a folder. You can change the order of the 
profile or the folder by dragging & dropping.
Copy
You can copy the profile. The copied profile is saved in 
the same folder as the original with the...