Epson Projector Emp 1700 User Manual

							Functions for Enhancing Projection
21
Once the connection has been made, the mouse pointer can be operated as 
follows.
q
 The USB cable can only be connected to computers with a 
standard USB interface. If using a computer which is 
running Windows, the computer must have had a full 
version of Windows 98/2000/Me/XP Home Edition/XP 
Professional installed. If the computer is running a 
version of Windows 98/2000/Me/XP Home Edition/XP 
Professional that has been upgraded from an earlier 
version of Windows, correct operation cannot be 
guaranteed. 
 It may not be possible to use the mouse function under 
some versions of both the Windows and Macintosh 
operating systems.
 Some computer settings may have to be changed in order 
for the mouse function to be used. Consult the 
documentation for the computer for further details.
Moving the mouse pointer Mouse clicks
Drag and drop
This is useful for displaying 
the previous or next slide in a 
PowerPoint slideshow.Double-click: Press twice in rapid 
succession. Left click Right click
1. Hold down the [Enter] button and 
tilt and drag the [h] button.
2. Release the [Enter] button to drop 
at the desired location.
To previous slide
To next slide 
						

							Functions for Enhancing Projection
22
q
 If the mouse button settings are set to reverse on the 
computer, the operation of the remote control buttons will 
also be reversed.
 The wireless mouse function cannot be used while the 
following functions are being used.
· While a configuration menu is being displayed 
· While a help menu is being displayed
· While the E-Zoom function is being used
· While a users logo is being captured
· Pointer function
· While adjusting sound volume 
						

							23
Adjusting Colour for Several Projectors (Multi-Screen Colour Adjustment)When several projectors are lined up and projecting images, you can 
adjust the brightness and colour tone of each projectors image with 
multi-screen colour adjustment so that the colours of images from 
each projector match closely.
In some cases the brightness and colour tone may not match 
completely even after adjustment.Summary of Adjustment Procedure
Make adjustments according to the following procedure.
1. Setting screen ID
Before setting up the projectors, set one screen ID for each. 
When making adjustments for two or more projectors using the remote 
control, you can operate them individually by setting individual screen 
IDs for each projector. 
2. Making image corrections
After the projectors are setup, you can adjust the image for each 
projector. 
Using Image Correction you can adjust from black to white in five 
stages called levels 1 to 5, and in each level 1 to 5 you can adjust the 
following two points.
 Adjusting brightness
Adjust each image by levels 1 to 5 so that they are all equal. 
 Adjusting colour
Adjust each image by levels 1 to 5 so that the colours match using 
Color Correct. (G/R) and Color Correct. (B/Y). 
Setting Screen ID
For instance, after setting one projector as screen ID3, when you press 
button [3] while holding down the [Num] button, even if there is more 
than one projector setup, you can operate just the one set as screen ID3.A
Press the [Menu] button and select Extended - 
Multi-screen - Screen ID from the configuration 
menu. sp.31Check the buttons you can use and the operations they perform in 
the guide under the menu.
Procedure
Using the remote control Using the control panel 
						

							Adjusting Colour for Several Projectors (Multi-Screen Colour Adjustment)
24
B
Choose the ID you want to set and press the [Enter] 
button.
C
Press the [Menu] button to close the configuration 
menu. Point the remote control at the remote receiver on the projector 
you want to operate, press the numeric button corresponding to 
the screen ID set while holding down the [Num] button, and then 
you can operate only the projector specified with the ID number.
 You can operate all projectors regardless of the screen ID 
settings by pointing the remote control at the remote receiver on 
the projector, and pressing the [0] button while holding down the 
[Num] button.
Image Correction Method
After setting up the projectors, adjust the brightness and tone for each 
image.A
Press the [Menu] button and select Extended - 
Multi-screen - Image Correction from the 
configuration menu. sp.31
B
Select the level to be adjusted in Adjustment 
Level. Each time a level is selected, the pattern of the level selected is 
displayed.
 You can start adjusting from any level, usually you can make it 
darker or lighter by adjusting 1 to 5 or 5 to 1.
C
Adjust the brightness with Brightness Correct.. When you select level 5, it adjusts to the darkest image from 
several projectors.
 When you select level 1, it adjusts to the brightest image from 
several projectors.
 When you select level 2 to 4, it adjusts to the mid-range 
brightness image from several projectors.
 Each time the [Enter] button is pressed the image displayed 
changes between the pattern display and the actual image, and 
you can check the adjustment results and make corrections in the 
actual image.
q
 The screen IDs set here are only effective during Image 
Correction for Multi-screen.
 If a projector that is not the object of operation reacts to 
the remote control, point the remote control at the remote 
receiver on that projector and press the number set as that 
projectors screen ID while holding down the [Num] 
button.
Procedure 
						

							Adjusting Colour for Several Projectors (Multi-Screen Colour Adjustment)
25
D
Adjusting Color Correct. (G/R) and Color Correct. 
(B/Y). Each time the [Enter] button is pressed the image displayed 
changes between the pattern display and the actual image, and you 
can check the adjustment results and make corrections in the actual 
image.
E
Repeat procedures 2 to 4 until adjustments are 
finished.
F
When all adjustments are finished, press the [Menu] 
button to close the configuration menu. 
						

							26
Security FunctionsThe projector has the following security functions.
 Password Protect
You can limit who can use the projector.
 Operation Lock
You can prevent people changing the settings on the projector 
without permission.Managing Users (Password Protect)
When Password Protect is activated, people who do not know the 
password cannot use the projector to project images even if the projector 
power is on. Furthermore, the users logo that is displayed when you turn 
on the projector cannot be changed. This acts as an anti-theft device as the 
projector cannot be used even if it is stolen. At the time of purchase, 
Password Protect is not activated.
fType of Password Protect
The following four kinds of password protect settings can be made 
according to how the projector is being used.
1. Power On Protect
When Power On Protect is On, the password must be entered 
whenever the projector is turned on after it has been disconnected from 
the power supply it was connected to the last time the password was 
entered.
If the correct password is not entered, projection does not start.
2. Password Timer
When Password Timer is set to On and a time limit is set, the 
projector requests the password after the time limit has passed. 3. Users Logo Protect
When Users Logo Protect is set to On the users logo cannot be 
changed and the following setting changes for users logo are 
prohibited.
 Capturing a users logo
 Settings for Display Background, Startup Screen, and A/V 
Mute from Display on the configuration menu.
4. Network Protect (EMP-1715/1705 only)
When Network Protect is set to On setting changes for Network 
in the configuration menu are prohibited. 
						

							Security Functions
27
fSetting Password Protect
Use the following procedure to set Password Protect. A
Hold down the [Freeze] button for about five 
seconds. The password protect setting menu is displayed. 
B
Turn on Power On Protect. (1) Select Power On Protect, and then press the [Enter] button. 
(2) Select On, and then press the [Enter] button. 
(3) Press the [Esc] button. 
C
Turn on Password Timer.If you do not use this setting, go to step 4.
(1) Select Password Timer, and then press the [Enter] button.
(2) Select On, and then press the [Enter] button.
(3) Press the [Esc] button.
(4) Select Timer, and then press the [Enter] button.
(5) While holding down the [Num] button, use the numeric buttons 
to enter the setting time within a range of 1 to 9999 hours and 
then press the [Enter] button. If you make a mistake entering 
the time, press the [Esc] button and re-enter the time. The time 
counter begins when you close the password protect setting 
menu. The count is only done while the lamp is lit, and not 
while it is turned off. 
The time already counted is displayed in Time-elapsed.
D
Turn on Users Logo Protect.  (1) Select Users Logo Protect, and then press the [Enter] button.
(2) Select On, and then press the [Enter] button. 
(3) Press the [Esc] button. 
E
Turn on Network Protect (EMP-1715/1705 only).(1) Select Network Protect, and then press the [Enter] button.
(2) Select On, and then press the [Enter] button.
(3) Press the [Esc] button.
Procedure
q
 If Password Protect is already activated, you must enter 
the password. 
If the password is entered correctly, the password protect 
setting menu is displayed. 
s
Entering the password 
p.28
 When the password is set, stick the password protect 
sticker in a visible position on the projector as a further 
theft deterrent. 
Remote control 
						

							Security Functions
28
F
Set the password. (1) Select Password, and then press the [Enter] button.
(2) The message Change the password? is displayed, select 
Yes and then press the [Enter] button. The default setting for 
the password is 0000. Change this to your own desired 
password. If you select No, the screen shown in step 1 is 
displayed again.
(3) While holding down the [Num] button, enter a four digit 
number using the numeric buttons. The number entered is 
displayed as * * * *. When you enter the fourth digit, the 
confirmation screen is displayed.
(4) Re-enter the password. 
The message Password accepted. is displayed. 
If you enter the password incorrectly, a message is displayed 
prompting you to re-enter the password.
fEntering the password
When the password entry screen is displayed, enter the password using the 
numeric buttons on the remote control.While holding down the [Num] button, enter the password 
by pressing the numeric buttons.When you enter the correct password, projection begins.
Remote control
Numeric buttons
Keep 
pressed
Procedure
Attention If an incorrect password is entered three times in succession, the 
message The projectors operation will be locked. is displayed 
for about five minutes, and then the projector switches to standby 
mode. If this happens, disconnect the power plug from the 
electrical outlet and then reinsert it and turn the projectors power 
back on. The projector displays the password entry screen again 
so that you can enter the correct password. 
 If you have forgotten the password, make a note of the Request 
Code: xxxxx number that appears on the screen and contact the 
nearest address provided in the World-Wide Warranty Terms. s
Inquiries
 If you continue to repeat the above operation and input the wrong 
password thirty times in succession, the following message is 
displayed and the projector does not accept any more password 
entries. The projectors operation will be locked. Contact Epson 
as described in your documentation. 
s
Inquiries 
						

							Security Functions
29
Restricting Operation (Operation Lock)
Do one of the following to lock the operation buttons on the control panel.
Full lock
All of the buttons on the control panel are locked. You cannot perform 
any operations from the control panel, including turning the power on or 
off.
 Partial lock
All of the buttons on the control panel, except for the [Power] button, 
are locked.
This is useful at events or shows when you want to deactivate all buttons 
and only project, or at schools when you want to limit button operation. 
The projector can still be operated using the remote control.A
Press the [Menu] button and select Settings - 
Operation Lock. sUsing the Configuration 
Menu p.31
Check the buttons you can use and the operations they perform in 
the guide under the menu.
B
Select either Full Lock or Partial Lock.
C
Select Yes when the confirmation message is 
displayed.The control panel buttons are locked according to the setting you 
chose.
Procedure
Using the remote control Using the control panel
q
You can release the control panel lock by one of the 
following two methods.
 From the remote control, select Off in Settings - 
Operation Lock from the configuration menu.
 Press and hold down the [Enter] button on the control 
panel for about seven seconds, a message is displayed and 
the lock is released. 
						

							Configuration MenuThis chapter explains how to use the configuration menu and its functions.Using the Configuration Menu .......................... 31
List of Functions ................................................. 32
 Image Menu .......................................................................32
 Signal Menu .......................................................................33
 Settings Menu ....................................................................34
 Extended Menu .................................................................35
 Network Menu (EMP-1715/1705 Only) ..........................37
 Info Menu (Display Only).................................................38
 Reset Menu ........................................................................39