Epson Projector EH-TW5350 User Manual

Basic Operations
30
c
It becomes more difficult to focus the higher the tilt angle is. Use a moderate tilt angle.
Adjusting the Projector's Tilt
If the projected image is horizontally tilted (the left and right sides of the projected image are at different
h e i g h t s )  w h e n  t h e  p r o j e c t o r  i s  s e t u p  o n  a  t a b l e ,  a d j u s t  t h e  r e a r  f o o t  s o  t h a t  b o t h  s i d e s  a r e  l e v e l  w i t h  e a c h  o t h e r .
Correcting Distortion
You can correct...

Basic Operations
31
c
If you do not want to use the Auto V-Keystone function, set Auto V-Keystone to Off. s Settings -
Keystone - Auto V-Keystone  p.68
Correct manually (H-Keystone adjuster)
Move the horizontal keystone adjuster to the right or left to perform horizontal keystone correction.
You can make effective corrections within a projection angle of 30° left to right.
Correct manually (H/V-Keystone)
You can use the  buttons on the control panel to correct keystone distortion.
Press the 
buttons to...

Basic Operations
32
c
•You can adjust the volume by pressing the  buttons when the gauges are not displayed.
s  p.32
•You can set H/V-Keystone from the Configuration menu. s Settings - Keystone - V-Keystone/H-
Keystone  p.68
Adjusting the Volume
You can adjust the volume by using the  buttons on the remote control or the  buttons
on the control panel.
Remote control Control panel
c
•You can also adjust the volume from the Configuration menu. s Settings - Volume  p.68
•When an AV System is connected to...

Adjusting the Image
33
Adjusting the Image
Selecting the Projection Quality (Color Mode)
You can obtain the optimum image quality to suit your surroundings when projecting. The brightness of the
image varies depending on the mode selected.
a
Press the  button.
c
•You can make settings from the Configuration menu. s Image - Color Mode  p.65
•If you press the  button, you can also make settings from the Home screen. s  p.27
b
Select Color Mode.
Use the  buttons to select a mode, and then press the  button...

Adjusting the Image
34 Choices when projecting 3D images
Mode Application
3D Dynamic
Images are bright and sharper than 3D Cinema.
3D CinemaProduces crisper colors than 3D Dynamic.
Switching the Screen Between Full and Zoom (Aspect)
You can change the input signal's type, aspect ratio, and resolution to match the Aspect of the projected
image.
The available settings vary depending on the image signal currently being projected.
Press the  button to displays menus in the following order.
Signal -...

Adjusting the Image
35
Input Image Setting Name
Normal Full Zoom
Notes
Matches the vertical size of
the projection panel. The
aspect ratio differs de-
pending on the input im-
age.Uses the entire projection
panel. The aspect ratio dif-
fers depending on the in-
put resolution.Retains the aspect ratio of
the input signal, and
matches the horizontal
size of the projection pan-
el. The top and bottom of
the image may be trunca-
ted.
*The letterbox image used in this explanation is a 4:3 aspect ratio image...

Adjusting the Image
36
b
Use the  buttons to
select the item you want to adjust, and
then press the 
 button to confirm
the selection.
c
Use the  buttons to make
adjustments.
Press the  b u t t o n  t o  a d j u s t  a n o t h e r  i t e m .
Press the 
 button to return the
adjustments to their default values.
d
Press the  button to exit the menu.
Setting Auto Iris
By automatically setting the luminance according to the displayed image, you can enjoy deep and rich images.
You can select the luminance...

Adjusting the Image
37
Adjusting the Color
Adjusting the Color Temp.
You can adjust the overall tint of the image. Make adjustments if the image is a little too blue or too red and
so on.
Press the  button to displays menus in the following order.
Image - Color Temp. - Color Temp.
Use the 
 buttons to make adjustments.
Blue tints grow stronger as the value is increased, and red
tints grow stronger as the value is reduced.
c
Press the  button to return the adjustments to their default values.
Adjusting...

Adjusting the Image
38
a
Press the  button to display menus
in the order Image - Advanced -
RGBCMY.
b
Use the  buttons to
select the color you want to adjust,
and then press the 
 button to
confirm the selection.
c
Use the  buttons to
select Hue, Saturation, or
Brightness.
d
Use the  buttons to make
adjustments.
Press the  button to adjust another
color.
Press the 
 button to return the
adjustments to their default values.
e
Press the  button to exit the menu. 

Adjusting the Image
39
Viewing the Image at the Saved Image Quality
(Memory Function)
Saving a Memory
You can save the adjustment values for Image from the Configuration menu.
a
Press the  button, and then make
the settings for Image that you want
to save.
b
Press the  button.
c
Use the  buttons to
select Save Memory, and then press
the 
 button to confirm the
selection.
d
Use the  buttons to
select the memory name to be saved,
and then press the 
 button to
confirm the selection.
The current projector...