Epson Projector EH-TW5350 User Manual

Maintenance
90
Maintenance
Cleaning the Parts
You should clean the projector if it becomes dirty or if the quality of projected images starts to deteriorate.
Warning
Do not use sprays that contain flammable gas to remove dirt and dust from the projector's lens, air filter,
and so on. The projector may catch fire due to the high internal temperature of the lamp.
Cleaning the air filter
Clean the air filter if dust has accumulated on the air filter or when the following message is displayed.
"The...

Maintenance
91
Cleaning the lens
Use a commercially available cloth for cleaning glasses to gently wipe off dirt from the lens.
Attention
Do not rub the lens with harsh materials or handle the lens too roughly as it can easily become damaged.
Cleaning the 3D Glasses
Use the cloth supplied to gently wipe off dirt from the lenses of
the 3D Glasses.
Attention
•Do not rub the lenses of the glasses with harsh materials or
handle the lenses too roughly as they can easily become
damaged.
•When maintenance is...

Maintenance
92
Replacing Consumables
Replacing the air filter
c
Dispose of used air filters properly in accordance with your local regulations.
Filter frame: ABS
Filter: Polyurethane foam
a
Press the  button on the remote
control or the control panel to turn off
the power, and then disconnect the
power cord.
b
Open the air filter cover.
c
Remove the old air filter.
Grip the air filter cover tab and pull it
straight up.
d
Install the new air filter.
Slide in the air filter until it clicks into place.
e...

Maintenance
93
Caution
•Do not touch the lamp cover immediately after turning off the projector as it is still hot. Wait until the lamp
has cooled down sufficiently before removing the lamp cover. Otherwise, you could get burnt.
•We recommend the use of genuine EPSON option lamps. The use of non-genuine lamps may affect projection
quality and safety.
Any damage or malfunction caused by the use of non-genuine lamps may not be covered by Epson's warranty.
a
Press the  button on the remote
control or...

Maintenance
94
h
Replace the lamp cover.
Slide the cover back into place.i
Tighten the lamp cover fixing screw.
Warning
Do not disassemble or remodel the lamp. If a modified or disassembled lamp is installed in the projector
and used, it could cause a fire, electric shock, or an accident.
Caution
•Make sure you install the lamp and lamp cover securely. If they are not installed correctly, the power does
not turn on.
•The lamp contains mercury (Hg). Dispose of used lamps in accordance with your local laws...

Appendix
95
Optional Accessories and Consumables
The following optional accessories/consumables are available for purchase if required. This list of optional
accessories and consumables is current as of: May, 2015. Details of accessories are subject to change without
notice.
Varies depending on country of purchase.
Optional Items
Name Model No. Explanation
Ceiling mount (white)*ELPMB23 Use when installing the projector on a ceiling.
Ceiling pipe 450 (450 mm white)
*ELPFP13 Use when installing the...

Appendix
96
Supported Resolutions
Computer Signals (Analog RGB)
Signal Refresh Rate (Hz) Resolution (dots)
VGA 60 640 x 480
SVGA 60 800 x 600
XGA 60 1024 x 768
SXGA 60 1280 x 960
60 1280 x 1024
WXGA 60 1280 x 768
60 1366 x 768
60 1280 x 800
WXGA++ 60 1600 x 900
Composite Video
Signal Refresh Rate (Hz) Resolution (dots)
TV (NTSC) 60 720 x 480
TV (SECAM) 50 720 x 576
TV (PAL) 50/60 720 x 576
HDMI1/HDMI2 Input Signal
Signal Refresh Rate (Hz) Resolution (dots)
VGA 60 640 x 480
SDTV (480i) 60 720 x 480
SDTV...

Appendix
97
Signal Refresh Rate (Hz) Resolution (dots)
SDTV (576i) 50 720 x 576
SDTV (480p) 60 720 x 480
SDTV (576p) 50 720 x 576
HDTV (720p) 50/60 1280 x 720
HDTV (1080i) 50/60 1920 x 1080
HDTV (1080p) 24/30 1920 x 1080
3D Input Signal HDMI
SignalRefresh Rate
(Hz)Resolution (dots) 3D Format
Frame Pack-
ingSide by Side Top and Bot-
tom
HDTV750p (720p) 50/60 1280 x 720
HDTV1125i (1080i) 50/60 1920 x 1080 --
HDTV1125p
(1080p)50/60 1920 x 1080 -
-
HDTV1125p
(1080p)24 1920 x 1080
3D Input Signal MHL...

Appendix
98
Specifications
Product nameEH-TW5350 EH-TW5300/EH-TW5210
Appearance297 (W) x 119 (H) x 249 (D) mm
Panel Size0.61" wide
Display methodPolysilicon TFT active matrix
Resolution1920 (W) x 1080 (H) x 3
Focus adjustmentManual
Zoom adjustmentManual (Approx. 1 to 1.2)
Lamp (light source)UHE lamp 200 W, Model No.: ELPLP88
Lamp replacement time3,900 hours
Power supply100 - 240 V AC ±10%, 50/60 Hz, 3.1 - 1.4 A
Power con-
sumption100 to 120 V areaOperating: 307 W
Standby power consumption...

Appendix
99
Angle of tilt
If you use the projector tilted at an angle of more than 12°, it could be
damaged or cause an accident.