Epson Projector Eb X6 User Manual

List of Functions
41
Signal Menu
Items that can be set vary depending on the image signal currently being projected as shown in the following screen shots. Setting details are saved for each 
image signal.
Sub Menu
Function
Auto Setup
You can select whether the image is automatic ally adjusted to the optimum state (On) or not (Off) when the input signal changes. s p.58
Resolution
When set to Auto, the re solution of the input signal is automatically identif ied. When set to Auto, if parts of the...

List of Functions
42
Reset
You can reset all adjustment values in the Signal menu to their default settings, except for Input Signal. 
To return all menu items to  their default settings, see sp.47
Sub Menu
Function 

List of Functions
43
Settings Menu
Sub Menu
Function
Keystone
You can correct vertical keystone distortion in images. 
s
Quick Start Guide
Auto Keystone
(EB-W6/X6 only)
Performs automatic keystone correction.
(This can only be specified when Front is  selected from Extended - Projection.)
Zoom
(EB-S6 only)
Set Tele/Wide.
(Tele makes the projected image size smaller, Wide makes it larger.)
Control Panel Lock
You can use this to restrict operation of the projectors control panel.  sp.34
Brightness...

List of Functions
44
Extended Menu
Sub Menu
Function
Display
You can make settings related to the projectors display. 
Messages : You can set whether to display (On) or no t display (Off) the source name when you change the input source, the color mode nam e 
when you change the Color Mode , a message when no image signal is input, and so on. 
Display Background
*1: You can set the screen status for when no image si gnal is available to Black, Blue, or Logo. 
Startup Screen
*1: You can set whether the...

List of Functions
45
Operation
Direct Power On: You can set whether Direct Power On  is enabled (On) or disabled (Off). 
When it is set to On and the projector po wer cable is connected to an electrical outle t, be aware that sudden surges of electricity may cause 
the projector to turn on automatically.
Sleep Mode : When set to On, this turns off the po wer automatically when no image signal is  input and no operations are performed.
Sleep Mode Timer : When Sleep Mode is set to On, you ca n set how...

List of Functions
46
Info Menu (Display only)
Lets you check the status of the image signals being projected and the status of the projector. Items displayed vary depending  on the image signal currently 
being projected as shown in  the following screen shots.
Sub Menu
Function
Lamp Hours
You can display the cumulative lamp operating time
*.
When it reaches the lamp warning time,  the characters are displayed in yellow.
Source
You can display the input port name for the connected equipment currently...

List of Functions
47
Reset Menu
Sub Menu
Function
Reset All
You can reset all items in all menus to their default settings.
The following items are not reset to th eir defaults: Input Signal, Users Logo, Lamp Hours, and Language.
Reset Lamp Hours
You can clear the cumulative Lamp Hours use time, and  return it to 0H. Reset it when you replace the lamp. 

TroubleshootingThis chapter describes how to identify problems and what to do if a problem is found. Using the Help..................................................... 49
Problem Solving................................................. 51
 Reading the Indicators......... .............................................51
t Power indicator  lights red .......................................................... 52
i  · o Indicator is lit or  flashing orange......................................... 54
 When...

49
Using the HelpIf a problem occurs with the projector, Help uses on-screen displays to 
assist you in solving the problem.  By answering the questions, you can 
make the correct settings.
A
Press the [Help] button.The help screen is displayed.
B
Select a menu item.
Procedure
Using the remote control
EB-W6 EB-X6/S6
Using the control panel
EB-W6/X6 EB-S6
Using the remote control
EB-W6 EB-X6/S6
Using the control panel
EB-W6/X6 EB-S6 

Using the Help
50
C
Confirm the selection.
 
Questions and solutions are displayed as shown on the screen 
below.
Press the [Help] button to exit Help.
Using the remote control
EB-W6 EB-X6/S6
Using the control panel
EB-W6/X6 EB-S6
q
 If Help does not provide a solution to the problem, refer to Problem Solving. 
s
p.51
 Displayed help contents differ  with the model of projector.