Epson Projector Eb 93h User Manual

							ESC/VP21 Command User’s Guide for Business Projectors
-90 ~ 901815/1810/1825
1760W/1770W.1775W/1750/1750G
-80 ~ 80G5350/G5300/G5150/G5100/G5200W
G5950/G5900/G5800/G5650W/
G5600/G5500
-64 ~ 648300/8350/9300, 830/835
7800/7850/7900/7950
-60 ~ 60S3/S4, 82, 6100, X5/822/823
1715/1710/1705/1710
1735W/1730W/725/1720
S6/X6/W6, 84/85/824/825/826W
Z8000WU/Z8050W
S7/X7/W7, S8/X8/W8
1910/1915/1920W/1925W
84H/He/L, 85H/HV,824H, 825H/HV,
826WH/WHV, 84+, 85+, 825+,826W+
S10/X10/W10,S9/X9/W9/S92/X92
93/95/96W/900/910W/905/915W/925
G5750WU/G5450WU
-60 ~ 59600/800/910/811/820
-30 ~ 30520/720/730/735, 30/52
VKEYSTONE xx0
-10 ~ 10440W/450W/460/455Wi/465i/465T
Set vertical keystone value
-64 ~ 64830/835
-60 ~ 601815/1810/1825
1925W/1915
1760W/1770W.1775W/1750/1750G
93/95/96W/900/910W/905/915W/925
-40 ~ 40G5350/G5100/G5200W
Z8000WU/Z8050W
G5950/G5900/G5800/G5650W/
G5600/G5500/G5750WU/G5450WU
-39 ~ 397800/7850/7900/7950
HKEYSTONE xx0
-29 ~ 29600/800/910/811/820
Set horizontal keystone value 
						

							ESC/VP21 Command User’s Guide for Business Projectors
9.Appendix
9.1.Communication specification
A projector and a computer can be connected using a serial or USB port. The projector can be remotely controlled by
sendingcommandsto theprojector.
Serial connection (600/800/810/811/820, 30/52, 73/53/74/54, 8300/9300, 7800/7850, S1/S1H, 61/81, 830/835/821,
828/7900/7950, 62/82,6100/6000, 1815/1810/1825, 83/822/83+/822+, 260/280, 6110/6010, 400W/410W,
G5350/G5300/G5200W/G5150/G5100/G5000,84/85/824/825/826W, Z800WU/Z8050W,1830/1900/1910/1915/
1920W/1925W,440W/450W/450We/450Wi/460/460e/460i,84H/84He/84L/85H/85HV/824H/825H/825HV/
826WH/826WHV,G5650W/C450WH/G5950/C520XH/G5900/C520XB/700KG/G5600/C450XB/600KG/G5800/C520XE
/G5500/C450XE/G5750WU/G5450WU,455W i/465i/465T,93/95/96W /900/910W /905/915W/925)
・Select RS-232C at Advanced Setting of the Menu.
・Communication condition
Baud rate:9600bps
Data length:8 bits
Parity:No
Stop bit:1 bit
Flow control: No
・Connector:D-Sub 9pin
・Projector input:Control(RS-232C) 
						

							ESC/VP21 Command User’s Guide for Business Projectors
USBconnection(600/800/810/811/820, 720/730/520, 73/53/74/54, 735, 8300/9300, 7800/7850, 61/81, 830/835,
740/745/732/737/760/765, 821/828, 7900/7950, S3/S4, 755/750,62/82/X3, 1715/1710/1705/1700,S5/X5/EX90,260,
G5350/G5150,S6/X6/W6, 1735W /1730W/1725/1720, S7/X7/W 7, S8/X8/W8, 1925W/1920W /1915/1910,
W10/X10/S10/EB-W9/X9/S9/X92/S92/EX7200/1260/W10+/EX5200/1220/X10+/EX3200/S10+/S9/VS200,
1760W/EB-1770W/1775W/750)
・For600/800/810/811/820, 74/54, select USB at advanced setting of the Menu.
・For720/730/520, 73/53, 740/745, 732/737, S3/S4/X3, 760/765, 1715/1710/1705/1700,S5/X5, 260, select Link 21L
at Advanced Setting of the Menu.
・For8300/8350/9300, select USB at Advanced2 setting of the Menu.
・For61/81, 830/835/821, select USB at Extended setting of the Menu.
・For1735W/1730W /1725/1720, S6/X6/W 6, S7/X7/W7, S8/X8/W8,S9/X9/W 9, S10/X10/W 10and
1760W/EB-1770W/1775W/750select Wireless Mouse and select Link 21L at Extended Setting of the Menu.
・EPSONUSB COM Driver has to be installed in your computer to use USB for communication. A COM port is added
to your computer, when the projector and your computer is connected by a USB cable. The added COM is listed at
PORT (COM/LPT) in the device manager tab of System in Control Panel as EPSON COM Emulation port (COMn).
USB COM DriverModels
EMPUSBSetup.exe600/800/810/811/820/720/730/520/73/53/74/54/735
EMPUSB2Setup.exe7800/7850/8300/9300/61/81/830/835/740/745/732/737
821/828/7900/7950//S3/765/760/755/750/62/82/X3(76)
S4/1715/1710/1705/1700/S5/X5/EX90/260/S6/X6/W6
1735W/1730W/1725/1720/S7/X7/W7/S8/X8/W 8
W10/10/S10/EB-W 9/X9/S9/X92/S92/EX7200/1260
W10+/EX5200/1220/X10+/EX3200/S10+/S9/VS200
1760W/1770W/1775W/1750/ 
						

							ESC/VP21 Command User’s Guide for Business Projectors
10.Revision History
RevisionIssueddatePageDescription
ASep 16, 2005All pagesFirst release.
BOct 19, 2005All pagesCorrection of disclaimer.
Model EMP-755/750 addition
CNov 4, 2005All pagesModel EMP-62/82/X3(76) addition
DApr 17, 2006All pagesModel EMP-S4 addition
EAug 11, 2006All pagesModel EMP-6100/6000 and EMP-1715/1710/1705/1700 addition
FMar 19, 2007All pagesModel EMP-1815/1810 and EMP-S5/X5/83/822 addition
GJun 4, 2007All pagesAddition of“Applicable Model”
HDec 21, 2007All pagesModel EMP-260/280 addition
IApr 23, 2008All pagesModel EMP-6110/6010, EMP-400W, EMP-83+/822+/EX90
EMP-1825 and EB-G5350/5300/5200W/5150/5100/5000 addition.
Addition of Error status.
JSep 19, 2008All pagesModel EB-1735W/1730W/1725/1720, EB-S6/X6/W6 addition
KFeb 25, 2009All pagesModel EB-Z8000WU/Z8050W addition.
LMar 25, 2009All pagesAddition of command of EB-Z8000WU/8050W
Model EB-410W and EB-84/85/824/825/826W addition.
MOct 9, 2009All pagesAddition EB-410W, EB-S7/X7/W7/S8/X8/W8,
EB-1830/1900/1915/1920W/125W
Addition of command for getting the serial number
NJan. 22, 2010All pagesAddition EB‐440W, 450W/e/i, 460/e/i, EB-84H/He/L, 85H/HV
824H, 825H/HV, 826WH/WHV, 84+, 85+, 825+, 826W+
O--Unused number
PJan.28, 2011All pagesAddition
-EB/PL-G5750WU/G5450WU/G5650W/G5950/G5900/G5600/G5800/G5500
-EB/PL-W 10/X10/S10/EB-W9/X9/S9/X92/S92/EX7200/1260
W10+/EX5200/1220/X10+/EX3200/S10+/S9/VS200
-EB/PL-1760W/1770W/1775W/1750
-EB-455W i/465i/465T
-EB-93/95/96W/900/910W/905/915W/925