Epson Projector Eb 93h User Manual

							ESC/VP21 Command User’s Guide for Business Projectors
ESC/VP21 Command User’s Guide for
Business Projectors 
						

							ESC/VP21 Command User’s Guide for Business Projectors
Table of Contents
1.Introduction to ESC/VP21..................................................................................................................................3
2.ESC/VP21 Command Formats...........................................................................................................................4
3.Applicable models...............................................................................................................................................4
4.Projector state and commands...........................................................................................................................5
5.Command transmissiontiming.........................................................................................................................5
6.Error Status........................................................................................................................................................7
7.Command list and applicable models................................................................................................................8
8.Command Details.............................................................................................................................................12
9.Appendix............................................................................................................................................................22
10.Revision History................................................................................................................................................24
Copyright Notice:
Allrights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any
means, electronic, mechanical, photocopying, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION.
No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages
resulting from the use of the information contained herein.
Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchase of this product or third parties for damages,
losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or
unauthorized modifications, repairs, or alterations to this product, or(excluding the U.S.)failure to strictly comply with SEIKO EPSON
CORPORATION(s operating andmaintenanceinstructions.
SEIKO EPSON CORPORATION shall not be liable against any damages or problems arising from the use of any options or any
consumableproducts other than those designated as Original EPSON Products or EPSON Approved Products by SEKO EPSON
CORPORATION.
EPSON is a registered trademark of SEIKO EPSON CORPORATION. EasyMP is a trademark of SEIKO EPSON CORPORATION.
Macintosh, Mac, and iMac are registered trademarks ofApple Computer, Inc. IBM is a registered trademark of International
Business Machines Corporation. Windows andWindowsNT are registered trademarks of Microsoft Corporation in the United States of
America.
GeneralNotice:
Other product names used hereinare also for identification purposes only and may be trademarks of their respective owner. EPSON
disclaims any and all rights in those marks.
©SEIKO EPSON CORPORTION 2003-2011. All rights reserved. 
						

							ESC/VP21 Command User’s Guide for Business Projectors
1.Introduction to ESC/VP21
ESC/VP21is a control command and protocol for Epson projectors, which is used for A/V controller to control and
monitor Epsonprojectors. The command codes are comprised of ASCII codes. Therefore the command codes can be
understood very easily and you can easily control projectorsusing a PC with a terminal emulator such as Microsoft Hyper
terminal.
Since ESC/VP21 is independent of communication protocols.Serial,USB or TCP/IP network can be used to transmit the
commands to projectors.
* Serial connection
A/V controller normally use as serial connection to control projectors. Refer to Appendix for details.
* USBconnection
A USB interface can be used to control a projector. Refer to Appendix for details.
* Network connection
After establishing a TCP session, ESC/VP21 commands can be sent to projectors. Refer to ESC/VP.net protocol manual 
						

							ESC/VP21 Command User’s Guide for Business Projectors
2.ESC/VP21 Command Formats
2.1.Set command format
A set command consists of a command and a parameter. Projector returns a colon after executing the command.
There are two types ofparameters. One is fixed such as ON, OFF, or 21. Other is a step parameter such as INC, DEC or
INIT.
INC: increments the parameter by one.
DEC: decrements the parameter by one.
INIT: initializes the parameter.
2.2.Get command format
A get command consists of a command and ?. Projector returns a response parameter after executing the command.
2.3.Null command
The null command is as command code of the return key code(Hex 0D). Projectorreturnsa colon。The null command
can be used to confirm that the projector is in operation.
2.4.Illegal commands
Projector returns“ERR”and a return key code(Hex 0D)and a colon when it receives invalid commands.
ERR
：
3.Applicable models
EMP-600/800/8110/811/820, 30/52, 720/730/520, 73/83/74/54, 735, 8300/9300, 7800/7850, S1/S1H, 61/81, 830/835, 740/745/732/737, 821/828,
7900/7950, S3/S4, 765/760, 755/750, 62/82/X3, 1715/1710/1705/1700, 6000/6100, 1815/1810, S5/X5/83/822, 260/280, 6010/6110, 400W/410W,
83+/822+, 1825/, EX90, G5350/G5300/G5150/G5100/G5200W/G5000, S6/X6/W6, 1735W/1730W/1725/1720, Z80000WU/Z8050W,S7/X7/W7,
S8/X8/W8,1830/1900/1910/1915/1920W/1925W,440W, 450W/We/Wi, 460/e/i,84H/He/L, 85H/HV,824H, 825H/HV, 826WH/WHV, 84+, 85+,
825+/826W+,S10/W10/X10,S9/X9/W9,S92/X92,1760W/1770W/1775W/1750,G5950/G5900/G5800/G5650W/G5600/G5500/G5750WU/G5450WU,
455Wi/465i/465T, 93/95/96W/900/910W/905/915W/925 
						

							ESC/VP21 Command User’s Guide for Business Projectors
4.Projector state and commands
4.1.Standby state(Operation indicator is in orange)
When a projector is in a standby state,executable commands depends on projector models and standby configuration(network
on, network off). Refer to the following table.
(note1)
EMP-61/81/830/835/740/745/821/828 returns“ERR”when it received commands other than PWR ON, PWR?, LAMP? and
Null commands.
(note2)EMP-7800/7850 returns“ERR”whenit received commands other than PWR ON, PWR?, SOURCE?and Null commands.
(note3)EMP-8300/9300 returns“ERR”when it received commands other than PWR ON, SOURCE xx, PWR?, SOURCE? and Null
commands
All projectors returns“ERR”when the commandformat is not good. All projectors returns“ERR”when the projector is not ready to
reply the command.A null command iscommandname for“ENTER”or“RETURE”key of the keyboard the reply is“:”.
4.2.Power on state(Operation indicator is in green)
All commands areexecutable.
5.Command transmission timing
5.1.Standby state
1).For all mode with the standby configuration of“network on”
The first command can be sent anytime and the subsequent commands should be sent after receiving a colon from the
projector.
2).Other than 1)
PWR ON can be sent any time.
5.2.Power on state
A command should be sent afterreceivingthe colon of the previous command fromtheprojector. The following is an
exception. W henthePW R OFF command is sent to 7800/7850/8300/9300 with the standby configuration of“network off”,
the subsequent command should be sent 10 seconds after the colon is received.
Incase thatyou can not wait for the colon and send a command after receiving it, instead send a command after the
execution time listed in the following table.
ModelsConfigurationExecutable commands
61/81,830/835, 821/828
740/745/732/737,760/765
S3/S4, 765/760/755/750
62/82/X3(76),6100/6000
1715/1710/1705/1700
1815/1810/1825
S5/X5/83/822/823/83+/822+,
260/280,400W/410W
G5350/G5300/G5100/G5200W/
G5150/G5000, 6110/6010,
1735W/1730W/1725/1720
84/85/824/825/826W
Z8000WU/Z8050W
S7/X7/W7, S8/X8/W8
1900/1910/1915/1920W/1925W
84H/85H/825H/826H
440W/450W/460
, and later model
Network on/offPWR ON
PWR?
LAMP?
Network onPWR ON, PWR?, SOURCE?,
Null command(note1)
7800/7850
8300/8350/9300
7900/7950
(note3)Network off
Others-
PWR ON(Note2) 
						

							ESC/VP21 Command User’s Guide for Business Projectors
CommandModelsExecution time
Others40seconds
830/835(note5)
7900/7950/740/745
20seconds
PWR ON
61/81/821/S3/S425seconds
600/800/810/811/820130seconds
Others50seconds
740745, 732/737, 82120seconds
PWR OFF(note4)
S3/S4, 765/760/755/750,830/835
82, 6100, 1715/1710/1705/1700,
1815/1810/1825, X5/822/823,
400W/410W, G5350/G5100/G5200W
S6/X6/W6,1735W /1730W/1725/1720,
84/85/824/825/826W, and later model
10seconds
SOURCE(note3)-5seconds(note2)
All others-3seconds
(note1)W hen a projector receives the PWR ON command, it tries to ignite the lamp by activating the ballast unit. In
case that the lamp fails to be ignited, it tries to ignite the lamp three times at maximum.When the lamp fails to be
ignited three times, it is a lamp failure.
The projector returns a colon within 40, 70 and 100 seconds when successful in the first, second and third times
respectively.
(note2)When the input vide sync signal is stable, a colon is returned within 5 seconds. However, it may take more than
5 seconds when the input video sync signal is unstable.
(note3)Projector initiates the process of the input video signal recognition whenit receives a SOURCE command.If
the signal of the video inputis changing (for example, from SVGA to XGA by A/V controller) during the process of
the input video signal recognition, the projectorreturns“ERR”.
(note4)Projectors execute the PWR OFF command after they start completely.
(note5)Projectors might return“ERR”when“Quick Setup”and“Auto Focus”functions are set to ON.
5.3.Warning and abnormal cases
Projector executes commands normally while a warning indicator such as a high temperature warning is on.
Projector does not execute commands nor return a colon when the projector is in an abnormal state such as a lamp
failure and abnormal high temperature.
As for EMP-6100/6000, EMP-1715/1710/1705/1700, EMP-1815/1810, EMP-S5/X5/83/822 and the following models,
when an abnormal state is continued for 130 seconds after, PWR ON command becomes possible. 
						

							ESC/VP21 Command User’s Guide for Business Projectors
6.Error Status
A projector returns the error status when a projector receives ERR? command.
The following projectors can return the error status while the projectors become
the error status after cooling down.
EMP-1700/1705/1710/1715, 6000/6100/6110/6010, 1815/1810/1825, S5/X5/83/
EB-G5000/G5100/G5150/G5200W/G5300/G5350
And later models.
[The other models except the above models]
The models except the above models can return the error status while the projectors
The following table shows the return codes and the meaning of error status.
CommandReturn code
00 :There is no error or the error is recovered
01 : Fan error
03 : Lamp failure at power on
04 : High internal temperature error
06 : Lamp error
07 : Open Lamp cover door error
08 : Cinema filter error
09 : Electric dual-layered capacitor is disconnected
0A : Auto iris error
0B : Subsystem Error
0C : Low air flow error
0D : Air filter air flow sensor error
0E : Power supply unit error (Ballast)
0F : Shutter error
10 : Cooling system error (peltiert element)
ERR?
11 : Cooling system error (Pump) 
						

							ESC/VP21 Command User’s Guide for Business Projectors
7.Command list and applicable models
7.1.Command table 1 (Fixed parameter)
(O：Supported-：Not supported)
FunctionCommand
600/800/810/811/820
720/730/520/
735
30/5273/53/74/
54
8300/8350/9300
7800/7850/7900/
7950
S1/S1H61/81830/835
PowerPWROOOOOOOOO
Input sourceSOURCEOOOOOOOOO
PinP settingPINPO---OO--O
A/V Mute ScreenMSELOOOOOOOOO
Auto KeystoneAUTOKEYSTONE-O-O-O-OO
Aspect settingASPECT---OOOOO
Color modeCMODEOOOOOOOOO
Lamp hourLAMP?OOOOOOOOO
Brightness levelLUMINANCE---OOO-OO
A/V MuteMUTEOOOOOOOOO
FreezeFREEZE-OOOOOOOO
Rear projectionHREVERSEOOOOOOOOO
CeilingVREVERSEOOOOOOOOO
Audio inputAUDIOO-OO-O---
Key operationKEYOOOOOOOOO
FunctionCommand
740/745732/737
760/765755/750
821828S3X3
S4
6282610060001715/1710/
1705/1700
1812/1810/
1825
S5/X583/822
83+/822+EX90
260280
PowerPWROOOOOOOOO
Input sourceSOURCEOOOOOOOOO
PinP settingPINP---------
A/V Mute ScreenMSELOOOOOOOOO
Auto KeystoneAUTOKEYSTONEOOO---O
no S5
O
no260
Aspect settingASPECTO-OOOOOOOO
Color modeCMODEOOOOOOOOO
Lamp hourLAMP?OOOOOOOOO
Brightness levelLUMINANCEOOOOOOOOO
A/V MuteMUTEOOOOOOOOO
FreezeFREEZEOOOOOOOOO
Rear projectionHREVERSEOOOOOOOOO
CeilingVREVERSEOOOOOOOOO
Audio inputAUDIO----O----
Key operationKEYOOOOOOOOO
Closed CaptionCCAP----O----
Air filter alarm timerFLWARNING----O----
Air filter timerFLTIME----O----
Air filter usage timeFILTER----O---- 
						

							ESC/VP21 Command User’s Guide for Business Projectors
FunctionCommand
G5350G5300G5200W
G5150G5100G5000
S6/S62X6/W6
1735W /1730W /1725/
1720
84/85/824/825826W
Z8000W UZ8050WS7/X7/W7S8
X8/ W 81910/1915/1920W /
1925W
PowerPWROOOOOOOO
Input sourceSOURCEOOOOOOOO
PinP settingPINP--------
A/VMute ScreenMSELOOOOOOOO
Auto Keystone
AUTOKEYSTONE
-
O
X6,W 6
Only
OO--OO
Aspect settingASPECTOOOOOOOO
Color modeCMODEOOOOOOOO
Lamp hourLAMP?OOOOOOOO
Brightness levelLUMINANCEOOOOOOOO
A/V MuteMUTEOOOOOOOO
FreezeFREEZEOOOOOOOO
Rear projectionHREVERSEOOOOOOOO
CeilingVREVERSEOOOOOOOO
Audio inputAUDIO--------
Key operationKEYOOOOOOOO
Closed CaptionCCAP
Air filter alarm timerFLWARNING--------
Air filter timerFLTIME--------
Air filter usage timeFILTER--------
Serial NumberSNO?---OO--O
FunctionCommand
460/e/i450W /e/i
440W455W i465i
465T
825H/HV,826WH/W
HV,85+,825+,824H
84H/He/L84+
S10W10/X10S9/X9/W 9S92/X921760W1770W
1775W17501750G
G5950G5900
G5800G5650WG5600
G5500G5750W UG5450W U
9395
96W900910W
905915W925
PowerPWROOOOOOOO
Input sourceSOURCEOOOOOOOO
A/V Mute ScreenMSELOOOOOOOO
Auto KeystoneAUTOKEYSTONE-O-O-O-O
Aspect settingASPECTOOOOOOOO
Color modeCMODEOOOOOOOO
Lamp hourLAMP?OOOOOOOO
Brightness levelLUMINANCEOOOOOOOO
A/V MuteMUTEOOOOOOOO
FreezeFREEZEOOOOOOOO
Rear projectionHREVERSEOOOOOOOO
CeilingVREVERSE-OOOOOOO
Audio inputAUDIO
O-OOOO
O
W/O
5800/5500
O
Key operationKEYOOOOOOOO
Closed CaptionCCAPOO--OOOO
Air filter alarm timerFLWARNING--------
Air filter timerFLTIME--------
Air filter usage timeFILTER--------
Serial NumberSNO?OO---OOO 
						

							ESC/VP21 Command User’s Guide for Business Projectors
7.2.Command table 2 (Step parameter)
FunctionCommand
600/800/810/811/820
720/730/520/
735
30/5273/53/74/
54
8300/8350/9300
7800/7850/7900/
7950
S1/S1H61/81830/835
Adjust the volumeVOLOOOOOOOOO
Adjust the treble setting
(Adjust the tone setting)TONEH---------
Adjust the bass settingTONEL---------
Set brightnessBRIGHTOOOOOOOOO
Set contrastCONTRASTOOOOOOOOO
Set tintTINTOOOOOOOOO
Set vertical keystone valueVKEYSTONEOOOOOOOOO
Set horizontalkeystonevalueHKEYSTONEO----O--O
FunctionCommand
740/745732/737760/765
755/750
821828S3/S462/82
61006000611060101715/1710/1705/
1700
1815/1810/1825
X5/822/83/83+
822+EX90
400W /410W
Adjust the volumeVOLOOOOOOOOO
Adjust the treble setting
(Adjust the tone setting)TONEH---------
Adjust the bass settingTONEL---------
Set brightnessBRIGHTOOOOOOOOO
Set contrastCONTRASTOOOOOOOOO
Set tintTINTOOOOOOOOO
Set vertical keystone valueVKEYSTONEOOOOOOOOO
Set horizontalkeystonevalueHKEYSTONE------O--
FunctionCommand
G5350G5300
G5150G5100G5000
G5200W
S6/S62X6/W 61735W1730W
17251720
84/85824
825826W
Z8000W U/Z8050WS7/S8X7/X8
W7/W8
1910/1915/
1920W /1925W
460/e/i450W /e/i
440W455Wi465i
465T
Adjust the volumeVOLOOOO-OOO
Adjust the treble setting
(Adjust the tone setting)TONEH--------
Adjust the bass settingTONEL--------
Set brightnessBRIGHTOOOOOOOO
Set contrastCONTRASTOOOOOOOO
Set tintTINTOOOOOOOO
Set vertical keystone valueVKEYSTONEOOOOOOOO
Set horizontalkeystonevalueHKEYSTONEO---O---
Adjust the zoomZOOM--------
Adjust the focusFOCUS--------
Adjust the vertical lens shiftLENS--------
Adjust the horizontal lens shiftHLENS--------