Epson Projector Eb 93h User Manual
Here you can view all the pages of manual Epson Projector Eb 93h User Manual. The Epson manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 1
ESC/VP21 Command User’s Guide for Business Projectors ESC/VP21 Command User’s Guide for Business Projectors
Page 2
ESC/VP21 Command User’s Guide for Business Projectors Table of Contents 1.Introduction to ESC/VP21..................................................................................................................................3 2.ESC/VP21 Command Formats...........................................................................................................................4 3.Applicable...
Page 3
ESC/VP21 Command User’s Guide for Business Projectors 1.Introduction to ESC/VP21 ESC/VP21is a control command and protocol for Epson projectors, which is used for A/V controller to control and monitor Epsonprojectors. The command codes are comprised of ASCII codes. Therefore the command codes can be understood very easily and you can easily control projectorsusing a PC with a terminal emulator such as Microsoft Hyper terminal. Since ESC/VP21 is independent of communication protocols.Serial,USB or TCP/IP...
Page 4
ESC/VP21 Command User’s Guide for Business Projectors 2.ESC/VP21 Command Formats 2.1.Set command format A set command consists of a command and a parameter. Projector returns a colon after executing the command. There are two types ofparameters. One is fixed such as ON, OFF, or 21. Other is a step parameter such as INC, DEC or INIT. INC: increments the parameter by one. DEC: decrements the parameter by one. INIT: initializes the parameter. 2.2.Get command format A get command consists of a command and ?....
Page 5
ESC/VP21 Command User’s Guide for Business Projectors 4.Projector state and commands 4.1.Standby state(Operation indicator is in orange) When a projector is in a standby state,executable commands depends on projector models and standby configuration(network on, network off). Refer to the following table. (note1) EMP-61/81/830/835/740/745/821/828 returns“ERR”when it received commands other than PWR ON, PWR?, LAMP? and Null commands. (note2)EMP-7800/7850 returns“ERR”whenit received commands other than PWR...
Page 6
ESC/VP21 Command User’s Guide for Business Projectors CommandModelsExecution time Others40seconds 830/835(note5) 7900/7950/740/745 20seconds PWR ON 61/81/821/S3/S425seconds 600/800/810/811/820130seconds Others50seconds 740745, 732/737, 82120seconds PWR OFF(note4) S3/S4, 765/760/755/750,830/835 82, 6100, 1715/1710/1705/1700, 1815/1810/1825, X5/822/823, 400W/410W, G5350/G5100/G5200W S6/X6/W6,1735W /1730W/1725/1720, 84/85/824/825/826W, and later model 10seconds SOURCE(note3)-5seconds(note2) All...
Page 7
![Page 7
ESC/VP21 Command User’s Guide for Business Projectors
6.Error Status
A projector returns the error status when a projector receives ERR? command.
The following projectors can return the error status while the projectors become
the error status after cooling down.
EMP-1700/1705/1710/1715, 6000/6100/6110/6010, 1815/1810/1825, S5/X5/83/
EB-G5000/G5100/G5150/G5200W/G5300/G5350
And later models.
[The other models except the above models]
The models except the above models can return the error status while the...](http://img.usermanuals.tech/thumb/23/89373/w300_epson-eb-93h-manual_d-6.png "Page 7
ESC/VP21 Command User’s Guide for Business Projectors
6.Error Status
A projector returns the error status when a projector receives ERR? command.
The following projectors can return the error status while the projectors become
the error status after cooling down.
EMP-1700/1705/1710/1715, 6000/6100/6110/6010, 1815/1810/1825, S5/X5/83/
EB-G5000/G5100/G5150/G5200W/G5300/G5350
And later models.
[The other models except the above models]
The models except the above models can return the error status while the...")
ESC/VP21 Command User’s Guide for Business Projectors 6.Error Status A projector returns the error status when a projector receives ERR? command. The following projectors can return the error status while the projectors become the error status after cooling down. EMP-1700/1705/1710/1715, 6000/6100/6110/6010, 1815/1810/1825, S5/X5/83/ EB-G5000/G5100/G5150/G5200W/G5300/G5350 And later models. [The other models except the above models] The models except the above models can return the error status while the...
Page 8
ESC/VP21 Command User’s Guide for Business Projectors 7.Command list and applicable models 7.1.Command table 1 (Fixed parameter) (O：Supported-：Not supported) FunctionCommand 600/800/810/811/820 720/730/520/ 735 30/5273/53/74/ 54 8300/8350/9300 7800/7850/7900/ 7950 S1/S1H61/81830/835 PowerPWROOOOOOOOO Input sourceSOURCEOOOOOOOOO PinP settingPINPO---OO--O A/V Mute ScreenMSELOOOOOOOOO Auto KeystoneAUTOKEYSTONE-O-O-O-OO Aspect settingASPECT---OOOOO Color modeCMODEOOOOOOOOO Lamp hourLAMP?OOOOOOOOO Brightness...
Page 9
ESC/VP21 Command User’s Guide for Business Projectors FunctionCommand G5350G5300G5200W G5150G5100G5000 S6/S62X6/W6 1735W /1730W /1725/ 1720 84/85/824/825826W Z8000W UZ8050WS7/X7/W7S8 X8/ W 81910/1915/1920W / 1925W PowerPWROOOOOOOO Input sourceSOURCEOOOOOOOO PinP settingPINP-------- A/VMute ScreenMSELOOOOOOOO Auto Keystone AUTOKEYSTONE - O X6,W 6 Only OO--OO Aspect settingASPECTOOOOOOOO Color modeCMODEOOOOOOOO Lamp hourLAMP?OOOOOOOO Brightness levelLUMINANCEOOOOOOOO A/V MuteMUTEOOOOOOOO...
Page 10
ESC/VP21 Command User’s Guide for Business Projectors 7.2.Command table 2 (Step parameter) FunctionCommand 600/800/810/811/820 720/730/520/ 735 30/5273/53/74/ 54 8300/8350/9300 7800/7850/7900/ 7950 S1/S1H61/81830/835 Adjust the volumeVOLOOOOOOOOO Adjust the treble setting (Adjust the tone setting)TONEH--------- Adjust the bass settingTONEL--------- Set brightnessBRIGHTOOOOOOOOO Set contrastCONTRASTOOOOOOOOO Set tintTINTOOOOOOOOO Set vertical keystone valueVKEYSTONEOOOOOOOOO Set...