Epson Projector BrightLink Pro 1430Wi User Manual

Adjusting the Menu Settings
Follow the instructions in these sections to access the projector menu system and change projector
settings.
Using the Projectors Menus
Image Quality Settings - Image Menu
Input Signal Settings - Signal Menu
Projector Feature Settings - Settings Menu
Projector Setup Settings - Extended Menu
Projector Network Settings - Network Menu
Projector Setup Settings - ECO Menu
Projector Information Display - Info Menu
Projector Reset Options - Reset Menu
Using the Projectors Menus You...

1. Press the
Menubutton on the control panel or remote control.
You see the menu screen displaying the Image menu settings. 232   

2. Press the up or down arrow buttons to move through the menus listed on the left. The settings for
each menu are displayed on the right.
Note: The available settings depend on the current input source.
3. To change settings in the displayed menu, press Enter.
4. Press the up or down arrow button to move through the settings.
5. Change the settings using the buttons listed on the bottom of the menu screens.
6. To return all the menu settings to their default values, select Reset.
7. When you finish...

Image Quality Settings - Image Menu
Settings on the Image menu let you adjust the quality of your image for the input source you are currently
using. The available settings depend on the currently selected input source.
To change settings for an input source, make sure the source is connected and select that source.
Setting OptionsDescription
Color Mode See the list of available Color Adjusts the vividness of image
Modescolors for various image types
and environments
Brightness Varying levels available...

Setting
OptionsDescription
Color Temp. (color temperature) High Sets the overall color tone;High
tints the image blue and Low
Medium
tints the image red
Low
Advanced Various options available Adjusts the gamma levels and
intensity of individual hues in the
image
Auto Iris OffAdjusts the projected luminance
based on the image brightness
Normal
when certain Color Modes are
High Speed selected;High Speed sets faster
luminance correction for fast-
moving images
Note: TheBrightness setting does not affect...

Input Signal Settings - Signal Menu
Normally the projector detects and optimizes the input signal settings automatically. If you need to
customize the settings, you can use the Signal menu. The available settings depend on the currently
selected input source.
Note:You can restore the default settings of the Position,Tracking, and Syncsettings by pressing the
Auto button on the remote control.
To change settings for an input source, make sure the source is connected and select that source. Setting Options...

Setting
Options Description
Sync. Varying levels available Adjusts signal to eliminate
fuzziness or flickering in
computer images
Position Up, down, left, right Adjusts the image location on the
screen
Progressive Off Sets whether to convert
interlaced-to-progressive signals
Video
for certain video image types
Film/Auto Off: for fast-moving video images
Video: for most video images
Film/Auto: for movies, computer
graphics, and animation
Noise Reduction Off Reduces flickering in analog
images in two...

Setting
Options Description
Input Signal Auto Specifies the signal type from
input sources connected to
RGB
computer ports
Component Auto: detects signals
automatically
RGB: corrects color for
computer/RGB video inputs
Component: corrects color for
component video inputs
Video Signal Auto Specifies the signal type from the
input sources connected to the
Various video standards
video ports
Auto: detects signals
automatically
Aspect See the list of available aspect Sets the aspect ratio (width-to-
ratios...

Projector Feature Settings - Settings Menu
Options on the Settings menu let you customize various projector features.
Setting OptionsDescription
Keystone H/V KeystoneAdjusts image shape to
rectangular (horizontally and
Quick Corner
vertically)
H/V Keystone: lets you manually
correct horizontal and vertical
sides
Quick Corner: select to correct
image shape and alignment
using an on-screen display
Split Screen –Turns split screen on or off
Zoom Varying levels available Adjusts the size of the projected...

Setting
OptionsDescription
Control Panel Lock Full LockControls projector button locking
to secure the projector
Partial Lock
Full Lock: locks all buttons
Off
Partial Lock: locks all buttons
except the power button
Off: no buttons locked
Pointer Shape Three shapes availableChanges the shape of the remote
control pointer feature
Volume Varying levels available Adjusts the volume of projector’s
speaker system or external
speakers
Remote Receiver Front/RearLimits reception of remote control
signals by the...