Epson Projector 5020UB User Manual

							Specifications91
3D mode
Note: When projecting with WirelessHD, DeepColor (10 to 12 bit color depth) 1080P 50/60Hz is 
not supported.
3D format
ESC/VP21 Command Codes
You can use an AV controller with a 9-pin null modem serial cable to control the projector. You can 
download the complete ESC/VP 21 Communication Manual for home theater projectors from the 
Epson website at epson.com/support (U.S.) or epson.ca/support (Canada). 
HDTV
720p
1080i
1080p50/60
50/60
24/50/601280 × 720
1920 × 1080
1920 × 1080
Signal Refresh rate (Hz) Resolution
HDTV
720p
1080i
1080p50/60
50/60
24/50/601280 × 720
1920 × 1080
1920 × 1080
Signal Refresh rate (Hz) Resolution 3D Format
HDTV
720p
1080i
1080p
1080p50/60
50/60
50/60
241280 × 720
1920 × 1080
1920 × 1080
1920 × 1080Frame Packing, Side by Side, Top and Bottom
Side by Side
Side by side
Frame Packing, Top and Bottom
Signal Refresh rate (Hz) Resolution 
						

							92Notices
Notices
Important Safety Information
Follow these safety instructions when setting up and using the projector:
■Never look into the projector lens when the lamp is turned on; the bright light can damage your 
eyes. Never let children look into the lens when it is on.
■If you or any viewer experiences the following symptoms or other major discomfort from viewing 
3D video images, immediately stop viewing and contact your health care provider: convulsions, 
eye or muscle twitching, loss of awareness, altered vision, involuntary movements, disorientation, 
eye strain, nausea/vomiting, dizziness, headaches, fatigue, or blurry/double vision that lasts longer 
than few seconds. Do not engage in any potentially hazardous activity (such as driving a vehicle or 
operating machinery) until your symptoms have completely gone away. If the symptoms persist, 
discontinue use and do not resume stereoscopic 3D viewing without discussing your symptoms 
with a health care provider / physician. 
■Some viewers may experience a seizure or blackout when exposed to flashing images or lights 
contained in certain 3D content. Anyone who has a history of seizures, loss of awareness, 
symptoms linked to an epileptic condition, or has a family history of epilepsy, should contact a 
health care provider before using the 3D function. It is recommended that all viewers take regular 
breaks while watching 3D video images or playing stereoscopic 3D games. The suggested breaks 
are, at least 5 to 15 minutes after every 30 to 60 minutes of stereoscopic 3D content viewing.*
*Based on the guidelines issued by the 3D Consortium revised December 10, 2008. The length 
and frequency of necessary breaks will vary from person to person. If you experience any 
discomfort, you should immediately stop watching the 3D video images or playing stereoscopic 
3D games until the discomfort ends; consult a heath care provider / physician if necessary. 
■Due to the possible impact on vision development, viewers of 3D video images should be age 6 or 
older. Children and teenagers may be more susceptible to health issues associated with viewing in 
3D and should be closely supervised to avoid prolonged viewing without rest.
■Watching the screen while sitting too close for an extended period of time may cause eye strain. 
Consult your projector manual to determine the ideal viewing distance.
■Viewing 3D content may cause dizziness and disorientation for some viewers. Therefore, to avoid 
injury do not place your projector or screen near open stairwells, balconies, or wires, and do not sit 
near objects that could be broken if accidentally hit. 
						

							Notices93
■The following people should limit 3D content viewing:
People with a history of photosensitivity
People with heart disease
People in poor health
People who are sleep deprived
People who are physically tired
People under the influence of drugs or alcohol
Anyone who has ever experienced epileptic seizures or sensory disturbances triggered by flashing 
light effects
SOME LIGHT PATTERNS MAY INDUCE SEIZURES IN PERSONS WITH NO PRIOR 
HISTORY OF EPILEPSY.
■Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical 
voltages inside the projector can severely injure you.
■Except as specifically explained in this User’s Guide, do not attempt to service this product 
yourself. Refer all servicing to qualified service personnel.
■The projector and its accessories come packaged in plastic bags. Keep plastic bags away from small 
children to avoid any risk of suffocation.
■Don’t place the projector on an unstable cart, stand, or table. Also, don’t use the projector near 
water or sources of heat.
■Use the type of power source indicated on the projector. If you’re not sure of the power available, 
consult your dealer or power company.
■Place the projector near a wall outlet where the plug can be easily unplugged.
■Don’t insert the plug into an outlet with dust present, and insert the plug firmly into the outlet. 
Failure to do so could result in sparks or fire.
■Don’t overload wall outlets, extension cords, or integral convenience receptacles. This can cause 
fire or electric shock.
■Don’t block the slots and openings in the projector case. They provide ventilation and prevent the 
projector from overheating. Don’t operate the projector on a sofa, rug, or other soft surface, or in a 
closed-in cabinet unless proper ventilation is provided.
■Never push objects through the cabinet slots or spill liquid into the projector.
■Unplug the projector from the wall outlet and refer servicing to qualified service personnel under 
the following conditions: when the power cord or plug is damaged or frayed; if liquid has been 
spilled into the projector, or if it has been exposed to rain or water; if it doesn’t operate normally 
when you follow the operating instructions, or if it exhibits a distinct change in performance, 
indicating a need for service; if it has been dropped or the housing has been damaged.
■Don’t place the projector where the cord can be walked on. This may result in fraying or damage 
to the plug.
■Unplug the projector from the wall outlet before cleaning. Use a damp cloth for cleaning. Do not 
use liquid or aerosol cleaners.
■ The lamp(s) in this product contain mercury. Please consult your state and local regulations 
regarding disposal or recycling. Do not put in the trash. 
						

							94Notices
■Allow the lamp to cool for one hour before replacing it.
■Unplug the projector during lightning storms or when not in use for extended periods.
■Don’t place the projector or remote control on top of heat-producing equipment.
■If you use the projector in a country other than where you purchased it, use the correct power cord 
for that country.
■Don’t stand on the projector or place heavy objects on it.
■Don’t use the projector outside of the required temperature range of 41 to 95 °F 
(5 to 35 °C). Doing so may cause an unstable display and could lead to projector damage.
■Don’t store the projector outside of the required temperature range of 14 to 140 °F 
(–10 to 60 °C) or in direct sunlight for long periods of time. Doing so may cause damage 
to the case.
WARNING: The cords included with this product contain chemicals, including lead, known to the 
State of California to cause birth defects or other reproductive harm. Wash hands after handling. (This 
notice is provided in accordance with Proposition 65 in Cal. Health & Safety Code § 25249.5 and 
following.)
FCC Compliance Statement
For United States Users
This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This equipment generates, uses, and can 
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may 
cause harmful interference to radio or television reception. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment does cause interference to radio 
and television reception, which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the following measures:
■Reorient or relocate the receiving antenna.
■Increase the separation between the equipment and receiver.
■Connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected.
■Consult the dealer or an experienced radio/TV technician for help. 
						

							Notices95
WARNING
The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC 
Certification of this device and may cause interference levels which exceed the limits established by the 
FCC for this equipment. It is the responsibility of the user to obtain and use a shielded equipment 
interface cable with this device. If this equipment has more than one interface connector, do not leave 
cables connected to unused interfaces. Changes or modifications not expressly approved by the 
manufacturer could void the user’s authority to operate the equipment.
For Canadian Users
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment 
Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le materiel brouilleur du 
Canada.
Copyright Notice
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or 
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or 
otherwise, without the prior written permission of Seiko Epson Corporation. The information 
contained herein is designed only for use with this Epson product. Epson is not responsible for any use 
of this information as applied to other products.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or 
third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: 
accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this 
product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s operating 
and maintenance instructions.
Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any 
options or any consumable products other than those designated as Original Epson Products or Epson 
Approved Products by Seiko Epson Corporation.
A Note Concerning Responsible Use of Copyrighted 
Materials
Epson encourages each user to be responsible and respectful of copyright laws when using any Epson 
product. While some countries’ laws permit limited copying or reuse of copyrighted material in certain 
circumstances, those circumstances may not be as broad as some people assume. Contact your legal 
advisor for any questions regarding copyright law. 
						

							96Notices
Trademarks
EPSON, PowerLite, and C2Fine are registered trademarks, and EPSON Exceed Your Vision is a registered 
logomark of Seiko Epson Corporation.
PrivateLine is a registered trademark, DigiScan and AccuCinema are trademarks, and Extra Care is a service mark 
of Epson America, Inc.
HDMI, the HDMI logo, and High-Definition Multimedia Interface are registered trademarks 
of HDMI Licensing, LLC.
WirelessHD is a registered trademark of WirelessHD LLC.
General Notice: Other product names used herein are for identification purposes only and 
may be trademarks of their respective owners. Epson disclaims any and all rights in those 
marks.
This information is subject to change without notice.
© 2012 Epson America, Inc. 10/12
CPD-37765