Home > Epson > Projector > Epson Powerlite S4 Quick Setup Manual

Epson Powerlite S4 Quick Setup Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Epson Powerlite S4 Quick Setup Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 6
    Add page 1 to Favourites
    image text
    Enable zoom 
    							
Choosing a location
The projector supports 4 viewing setups. Choose the best one for 
your environment. If you install the projector in a rear or overhead 
position, you’ll need to choose the correct projection option, 
identified below, from the Extended menu. See the User’s Guide 
on your CD-ROM for instructions. 
 
 Table 
 Convenient for temporary front projection. 
 Choose Front from the menu.
 Ceiling 
 Professional installation recommended.  
 Choose Front /Ceiling from the menu.
 Rear 
  
For permanent installation behind a 
translucent screen. Choose Rear 
from the menu.
 Rear/Ceiling 
  Professional installation behind a translucent  
 screen recommended. Choose Rear/Ceiling 
 from the menu.
The distance between the projector and the screen determines the 
size of the image. The diagram below shows approximately how big 
your image will be, based on where you set up the projector. 
1	Unpack the projector
 You should have the following items:
Quick	 Setup
2	Connect your video source
Connect the projector to a computer or video source using any of the available 
connections shown below.
 • Check the connectors on your video equipment. If more than one 
    connection is available, choose the one that provides the best quality. 
   (The projector connectors from highest to lowest quality are 
   Computer/Component Video, S-Video, and Video.)
 •   A computer cable is included. You can purchase optional video cables 
through Epson or at local electronics stores. See the next page for 
accessory information. 
 •   You can connect up to 3 video devices and use the remote control to 
switch between them.
Turn over
ProjectorPower cordComputer cable
User’s Guide 
CD-ROM
Carrying casePassword protect 
sticker
Distance from projector to screen (ft.)
29.4(Wide)–39.8(Tele) ft.
(in.)19.6–26.5
9.7–13.2
7.8–10.5
5.8–7.9
4.8–6.6
2.9 –3.9
3.8–5.2
Epson
®
 PowerLite
®
 S4
3	Set up the remote control
   1 Remove the battery cover.
 2   Insert the batteries. 
 3 Replace the battery cover. 
 
The remote control is ready for use.
Projector 
remote control
To play back audio through the projector, you can connect an audio 
cable from your video device to the audio ports on the projector. 
See the User’s Guide on your CD-ROM for instructions.
NOTE
RCA video cable  (composite  video)
S-Video  cable
Component  video to  VGA cable
Computer  cable  (included)
Audio ports
Batteries
    Add page 2 to Favourites
    image text
    Enable zoom 
    							
Choosing a location
The projector supports 4 viewing setups. Choose the best one for 
your environment. If you install the projector in a rear or overhead 
position, you’ll need to choose the correct projection option, 
identified below, from the Extended menu. See the User’s Guide 
on your CD-ROM for instructions. 
 
 Table 
 Convenient for temporary front projection. 
 Choose Front from the menu.
 Ceiling 
 Professional installation recommended.  
 Choose Front /Ceiling from the menu.
 Rear 
  
For permanent installation behind a 
translucent screen. Choose Rear 
from the menu.
 Rear/Ceiling 
  Professional installation behind a translucent  
 screen recommended. Choose Rear/Ceiling 
 from the menu.
The distance between the projector and the screen determines the 
size of the image. The diagram below shows approximately how big 
your image will be, based on where you set up the projector. 
1	Unpack the projector
 You should have the following items:
Quick	 Setup
2	Connect your video source
Connect the projector to a computer or video source using any of the available 
connections shown below.
 • Check the connectors on your video equipment. If more than one 
    connection is available, choose the one that provides the best quality. 
   (The projector connectors from highest to lowest quality are 
   Computer/Component Video, S-Video, and Video.)
 •   A computer cable is included. You can purchase optional video cables 
through Epson or at local electronics stores. See the next page for 
accessory information. 
 •   You can connect up to 3 video devices and use the remote control to 
switch between them.
Turn over
ProjectorPower cordComputer cable
User’s Guide 
CD-ROM
Carrying casePassword protect 
sticker
Distance from projector to screen (ft.)
29.4(Wide)–39.8(Tele) ft.
(in.)19.6–26.5
9.7–13.2
7.8–10.5
5.8–7.9
4.8–6.6
2.9 –3.9
3.8–5.2
Epson
®
 PowerLite
®
 S4
3	Set up the remote control
   1 Remove the battery cover.
 2   Insert the batteries. 
 3 Replace the battery cover. 
 
The remote control is ready for use.
Projector 
remote control
To play back audio through the projector, you can connect an audio 
cable from your video device to the audio ports on the projector. 
See the User’s Guide on your CD-ROM for instructions.
NOTE
RCA video cable  (composite  video)
S-Video  cable
Component  video to  VGA cable
Computer  cable  (included)
Audio ports
Batteries
    Add page 3 to Favourites
    image text
    Enable zoom 
    							Choosing a location
The projector supports 4 viewing setups. Choose the best one for 
your environment. If you install the projector in a rear or overhead 
position, you’ll need to choose the correct projection option, 
identified below, from the Extended menu. See the User’s Guide 
on your CD-ROM for instructions. 
 
 Table 
 Convenient for temporary front projection. 
 Choose Front from the menu.
 Ceiling 
 Professional installation recommended.  
 Choose Front /Ceiling from the menu.
 Rear 
   For permanent installation behind a 
translucent screen. Choose Rear 
from the menu.
 Rear/Ceiling 
  Professional installation behind a translucent  
 screen recommended. Choose Rear/Ceiling 
 from the menu.
The distance between the projector and the screen determines the 
size of the image. The diagram below shows approximately how big 
your image will be, based on where you set up the projector. 
1	Unpack the projector
 You should have the following items:
Quick	Setup
2	Connect your video source
Connect the projector to a computer or video source using any of the available 
connections shown below.
 • Check the connectors on your video equipment. If more than one 
   connection is available, choose the one that provides the best quality. 
   (The projector connectors from highest to lowest quality are 
   Computer/Component Video, S-Video, and Video.)
 •   A computer cable is included. You can purchase optional video cables 
through Epson or at local electronics stores. See the next page for 
accessory information. 
 •   You can connect up to 3 video devices and use the remote control to 
switch between them.
ProjectorPower cordComputer cable
User’s Guide 
CD-ROM
Carrying casePassword protect 
sticker
Distance from projector to screen (ft.)
29.4(Wide)–39.8(Tele) ft.
(in.)
19.6–26.5
9.7–13.2
7.8 –10.5
5.8 –7.9
4.8– 6.6
2.9 –3.9
3.8– 5.2
Epson
®
 PowerLite
®
 S4
3	Set up the remote control
   1 Remove the battery cover.
 2   Insert the batteries. 
 3 Replace the battery cover. 
 
The remote control is ready for use.
Projector 
remote control
To play back audio through the projector, you can connect an audio 
cable from your video device to the audio ports on the projector. 
See the User’s Guide on your CD-ROM for instructions.
NOTE
RCA  video cable  (composite  video)
S-Video  cable
Component  video to  VGA cable
Computer  cable  (included)
Audio ports
Batteries
    Add page 4 to Favourites
    image text
    Enable zoom 
    							
5	Adjust the image
 1   To raise the image, press the foot adjust button and lift the front 
of the projector. Release the button to lock the foot in the position 
you want. 
 2   Rotate the focus ring to sharpen the image. To change the image size, 
use the Wide and Tele buttons on the projector.
 
 3    If your image looks like  or , first make sure the projector 
is facing the screen squarely. Then, if necessary, press the  and  
buttons on the projector’s control panel until the image is corrected.
     If the projector cannot be placed directly in front of the screen, you can 
use the Image Shift feature to move the image over the screen. See your 
User’s Guide on the CD-ROM.
 4    To select the best color mode, press the  
Color Mode button on the remote control 
repeatedly to move through the options.
   See your User’s Guide on the CD-ROM for more 
information about image adjustments. 
6		Install your User’s Guide 
and register your projector
 1    Insert the CD-ROM in your drive. If the installer doesn’t open 
automatically, double-click the Epson CD-ROM icon, then  
double-click the Epson installer icon. 
 2   Choose English, then follow the instructions on-screen to register  
your projector. 
	 3   When you are done registering, click User’s Guide to install it.
      If you don’t already have Adobe® Reader,® click Adobe Reader and 
follow the on-screen instructions to install it. 
 4   When the guide is installed, double-click the User’s Guide icon on  
your desktop to open your User’s Guide.
4	Plug in and turn on
 1 Open the lens cover. 
 2   Connect the power cord to the projector and plug 
the other end into an electrical outlet.
    The Power light turns orange.
 3 Press the  Power button on the projector or remote control.  
    You hear a beep, the Power light flashes green, and the 
   projector lamp comes on in about 4 seconds. The Power  
   light stays green. 
 4 Start your video or presentation. If you have connected more 
    than one video source, use the Source buttons on the remote 
   control to select the one you want to watch.
Source buttons
 
If you connected a notebook 
computer and no image is being 
projected, you may need to set 
up the notebook to output signals 
externally. See the Troubleshooting 
section for instructions.
NOTE
Turning off the projector
1 Press the  Power button on the projector or remote control. 
2   When you see the confirmation message, press the  Power 
button again.
3 When the projector beeps twice and the Power light turns 
  orange, unplug the projector.
	Where to get help
 Internet Support
 Visit http://support.epson.com for solutions to common problems. You 
 can download drivers and documentation, get FAQs and troubleshooting 
 advice, or e-mail Epson with your questions. 
 
 Visit http://www.presentersonline.com to access tips, templates, and 
 training for developing successful presentations.
	Speak to a Support Representative
   To use the Epson PrivateLine® Support service, call (800) 637-7661 and 
enter the PIN on the included Epson PrivateLine Support card. This 
service is available 6 AM to 6 PM, Pacific Time, Monday through Friday, 
for the duration of your warranty period. You may also speak with a 
projector support specialist by dialing one of these numbers:
 U.S.:  (562) 276-4394, 6 AM to 6 PM, Pacific Time, Monday-Friday 
 Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday-Friday 
  Toll or long distance charges may apply.
	Purchase Supplies and Accessories
		You can purchase screens, carrying cases, video cables, or other 
accessories from an Epson authorized reseller. To find the nearest  
reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online 
at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).
Troubleshooting
If you see a blank screen
If you see a blank screen or the No signal message after turning on your 
notebook, check the following:
    Make sure the Power light on the projector is green and not 
flashing and the lens cover is open.
 Try turning off the notebook and restarting it.
   If you’ve connected more than one computer and/or video source,  
you may need to press the Source Search button on the projector 
or the Search button on the remote control to select your video 
source. (Allow a few seconds for the projector to sync up after 
pressing it.)
   If you’re using Windows,® hold down the Fn key and press the 
function key that lets you display on an external monitor. It may 
have an icon such as , or it may be labeled CRT/LCD. 
Allow a few seconds for the projector to sync up after pressing it.
If the projector and the notebook don’t display  
the same image
If you’re using a Windows notebook:
   On most systems, the  or CRT/LCD key lets you toggle 
between the LCD screen and the projector, or display on both at 
the same time.
   You might need to use the Display utility in the Control Panel to 
enable both the LCD screen and external monitor port. Check your 
notebook’s manual or online help for details.
	 	If you have dual monitor support, you may need to uncheck the 
option to extend your Windows desktop in the Display Properties.
If you’re using a Macintosh® PowerBook® with OS X:
1.   From the Apple® menu, select System Preferences, then click 
Displays.
2.   Select VGA Display or Color LCD, click Arrangement or Arrange,  
and click Mirror Displays.
Epson is a registered trademark of Seiko Epson Corporation. PowerLite and PrivateLine are registered 
trademarks and Epson Store is a service mark of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks 
of their respective owners. Epson disclaims any and all rights in those marks. 
© 2006  Epson America, Inc. 4/06 
Printed in XXXXXXCPD-21358R1
Color Mode 
button
TIP
You can also register at www.epson.com/webreg.NOTE
Register today to get product updates, special promotions, 
and customer-only offers.
    Add page 5 to Favourites
    image text
    Enable zoom 
    							
5	Adjust the image
 1   To raise the image, press the foot adjust button and lift the front 
of the projector. Release the button to lock the foot in the position 
you want. 
 2   Rotate the focus ring to sharpen the image. To change the image size, 
use the Wide and Tele buttons on the projector.
 
 3    If your image looks like  or , first make sure the projector 
is facing the screen squarely. Then, if necessary, press the  and  
buttons on the projector’s control panel until the image is corrected.
     If the projector cannot be placed directly in front of the screen, you can 
use the Image Shift feature to move the image over the screen. See your 
User’s Guide on the CD-ROM.
 4    To select the best color mode, press the  
Color Mode button on the remote control 
repeatedly to move through the options.
   See your User’s Guide on the CD-ROM for more 
information about image adjustments. 
6		Install your User’s Guide 
and register your projector
 1    Insert the CD-ROM in your drive. If the installer doesn’t open 
automatically, double-click the Epson CD-ROM icon, then  
double-click the Epson installer icon. 
 2   Choose English, then follow the instructions on-screen to register  
your projector. 
	 3   When you are done registering, click User’s Guide to install it.
      If you don’t already have Adobe® Reader,® click Adobe Reader and 
follow the on-screen instructions to install it. 
 4   When the guide is installed, double-click the User’s Guide icon on  
your desktop to open your User’s Guide.
4	Plug in and turn on
 1 Open the lens cover. 
 2   Connect the power cord to the projector and plug 
the other end into an electrical outlet.
    The Power light turns orange.
 3 Press the  Power button on the projector or remote control.  
    You hear a beep, the Power light flashes green, and the 
   projector lamp comes on in about 4 seconds. The Power  
   light stays green. 
 4 Start your video or presentation. If you have connected more 
    than one video source, use the Source buttons on the remote 
   control to select the one you want to watch.
Source buttons
 
If you connected a notebook 
computer and no image is being 
projected, you may need to set 
up the notebook to output signals 
externally. See the Troubleshooting 
section for instructions.
NOTE
Turning off the projector
1 Press the  Power button on the projector or remote control. 
2   When you see the confirmation message, press the  Power 
button again.
3 When the projector beeps twice and the Power light turns 
  orange, unplug the projector.
	Where to get help
 Internet Support
 Visit http://support.epson.com for solutions to common problems. You 
 can download drivers and documentation, get FAQs and troubleshooting 
 advice, or e-mail Epson with your questions. 
 
 Visit http://www.presentersonline.com to access tips, templates, and 
 training for developing successful presentations.
	Speak to a Support Representative
   To use the Epson PrivateLine® Support service, call (800) 637-7661 and 
enter the PIN on the included Epson PrivateLine Support card. This 
service is available 6 AM to 6 PM, Pacific Time, Monday through Friday, 
for the duration of your warranty period. You may also speak with a 
projector support specialist by dialing one of these numbers:
 U.S.:  (562) 276-4394, 6 AM to 6 PM, Pacific Time, Monday-Friday 
 Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday-Friday 
  Toll or long distance charges may apply.
	Purchase Supplies and Accessories
		You can purchase screens, carrying cases, video cables, or other 
accessories from an Epson authorized reseller. To find the nearest  
reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online 
at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).
Troubleshooting
If you see a blank screen
If you see a blank screen or the No signal message after turning on your 
notebook, check the following:
    Make sure the Power light on the projector is green and not 
flashing and the lens cover is open.
 Try turning off the notebook and restarting it.
   If you’ve connected more than one computer and/or video source,  
you may need to press the Source Search button on the projector 
or the Search button on the remote control to select your video 
source. (Allow a few seconds for the projector to sync up after 
pressing it.)
   If you’re using Windows,® hold down the Fn key and press the 
function key that lets you display on an external monitor. It may 
have an icon such as , or it may be labeled CRT/LCD. 
Allow a few seconds for the projector to sync up after pressing it.
If the projector and the notebook don’t display  
the same image
If you’re using a Windows notebook:
   On most systems, the  or CRT/LCD key lets you toggle 
between the LCD screen and the projector, or display on both at 
the same time.
   You might need to use the Display utility in the Control Panel to 
enable both the LCD screen and external monitor port. Check your 
notebook’s manual or online help for details.
	 	If you have dual monitor support, you may need to uncheck the 
option to extend your Windows desktop in the Display Properties.
If you’re using a Macintosh® PowerBook® with OS X:
1.   From the Apple® menu, select System Preferences, then click 
Displays.
2.   Select VGA Display or Color LCD, click Arrangement or Arrange,  
and click Mirror Displays.
Epson is a registered trademark of Seiko Epson Corporation. PowerLite and PrivateLine are registered 
trademarks and Epson Store is a service mark of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks 
of their respective owners. Epson disclaims any and all rights in those marks. 
© 2006  Epson America, Inc. 4/06 
Printed in XXXXXXCPD-21358R1
Color Mode 
button
TIP
You can also register at www.epson.com/webreg.NOTE
Register today to get product updates, special promotions, 
and customer-only offers.
    Add page 6 to Favourites
    image text
    Enable zoom 
    							
5	Adjust the image
 1   To raise the image, press the foot adjust button and lift the front 
of the projector. Release the button to lock the foot in the position 
you want. 
 2   Rotate the focus ring to sharpen the image. To change the image size, 
use the Wide and Tele buttons on the projector.
 
 3    If your image looks like  or , first make sure the projector 
is facing the screen squarely. Then, if necessary, press the  and  
buttons on the projector’s control panel until the image is corrected.
     If the projector cannot be placed directly in front of the screen, you can 
use the Image Shift feature to move the image over the screen. See your 
User’s Guide on the CD-ROM.
 4    To select the best color mode, press the  
Color Mode button on the remote control 
repeatedly to move through the options.
   See your User’s Guide on the CD-ROM for more 
information about image adjustments. 
6		Install your User’s Guide 
and register your projector
 1    Insert the CD-ROM in your drive. If the installer doesn’t open 
automatically, double-click the Epson CD-ROM icon, then  
double-click the Epson installer icon. 
 2   Choose English, then follow the instructions on-screen to register  
your projector. 
	 3   When you are done registering, click User’s Guide to install it.
      If you don’t already have Adobe® Reader,® click Adobe Reader and 
follow the on-screen instructions to install it. 
 4   When the guide is installed, double-click the User’s Guide icon on  
your desktop to open your User’s Guide.
4	Plug in and turn on
 1 Open the lens cover. 
 2   Connect the power cord to the projector and plug 
the other end into an electrical outlet.
    The Power light turns orange.
 3 Press the  Power button on the projector or remote control.  
    You hear a beep, the Power light flashes green, and the 
   projector lamp comes on in about 4 seconds. The Power  
   light stays green. 
 4 Start your video or presentation. If you have connected more 
    than one video source, use the Source buttons on the remote 
   control to select the one you want to watch.
Source buttons
 
If you connected a notebook 
computer and no image is being 
projected, you may need to set 
up the notebook to output signals 
externally. See the Troubleshooting 
section for instructions.
NOTE
Turning off the projector
1 Press the  Power button on the projector or remote control. 
2   When you see the confirmation message, press the  Power 
button again.
3 When the projector beeps twice and the Power light turns 
  orange, unplug the projector.
	Where to get help
 Internet Support
 Visit http://support.epson.com for solutions to common problems. You 
 can download drivers and documentation, get FAQs and troubleshooting 
 advice, or e-mail Epson with your questions. 
 
 Visit http://www.presentersonline.com to access tips, templates, and 
 training for developing successful presentations.
	Speak to a Support Representative
   To use the Epson PrivateLine® Support service, call (800) 637-7661 and 
enter the PIN on the included Epson PrivateLine Support card. This 
service is available 6 AM to 6 PM, Pacific Time, Monday through Friday, 
for the duration of your warranty period. You may also speak with a 
projector support specialist by dialing one of these numbers:
 U.S.:  (562) 276-4394, 6 AM to 6 PM, Pacific Time, Monday-Friday 
 Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday-Friday 
  Toll or long distance charges may apply.
	Purchase Supplies and Accessories
		You can purchase screens, carrying cases, video cables, or other 
accessories from an Epson authorized reseller. To find the nearest  
reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online 
at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).
Troubleshooting
If you see a blank screen
If you see a blank screen or the No signal message after turning on your 
notebook, check the following:
    Make sure the Power light on the projector is green and not 
flashing and the lens cover is open.
 Try turning off the notebook and restarting it.
   If you’ve connected more than one computer and/or video source,  
you may need to press the Source Search button on the projector 
or the Search button on the remote control to select your video 
source. (Allow a few seconds for the projector to sync up after 
pressing it.)
   If you’re using Windows,® hold down the Fn key and press the 
function key that lets you display on an external monitor. It may 
have an icon such as , or it may be labeled CRT/LCD. 
Allow a few seconds for the projector to sync up after pressing it.
If the projector and the notebook don’t display  
the same image
If you’re using a Windows notebook:
   On most systems, the  or CRT/LCD key lets you toggle 
between the LCD screen and the projector, or display on both at 
the same time.
   You might need to use the Display utility in the Control Panel to 
enable both the LCD screen and external monitor port. Check your 
notebook’s manual or online help for details.
	 	If you have dual monitor support, you may need to uncheck the 
option to extend your Windows desktop in the Display Properties.
If you’re using a Macintosh® PowerBook® with OS X:
1.   From the Apple® menu, select System Preferences, then click 
Displays.
2.   Select VGA Display or Color LCD, click Arrangement or Arrange,  
and click Mirror Displays.
Epson is a registered trademark of Seiko Epson Corporation. PowerLite and PrivateLine are registered 
trademarks and Epson Store is a service mark of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks 
of their respective owners. Epson disclaims any and all rights in those marks. 
© 2006  Epson America, Inc. 4/06 
Printed in XXXXXXCPD-21358R1
Color Mode 
button
TIP
You can also register at www.epson.com/webreg.NOTE
Register today to get product updates, special promotions, 
and customer-only offers.
    All Epson manuals Comments (0)

    Related Manuals for Epson Powerlite S4 Quick Setup Manual