Epson Powerlite S4 Quick Setup Manual

Choosing a location
The projector supports 4 viewing setups. Choose the best one for 
your environment. If you install the projector in a rear or overhead 
position, you’ll need to choose the correct projection option, 
identified below, from the Extended menu. See the User’s Guide 
on your CD-ROM for instructions. 
 
 Table 
 Convenient for temporary front projection. 
 Choose Front from the menu.
 Ceiling 
 Professional installation recommended.  
 Choose Front /Ceiling from the menu.
 Rear 
  
For...

Choosing a location
The projector supports 4 viewing setups. Choose the best one for 
your environment. If you install the projector in a rear or overhead 
position, you’ll need to choose the correct projection option, 
identified below, from the Extended menu. See the User’s Guide 
on your CD-ROM for instructions. 
 
 Table 
 Convenient for temporary front projection. 
 Choose Front from the menu.
 Ceiling 
 Professional installation recommended.  
 Choose Front /Ceiling from the menu.
 Rear 
  
For...

Choosing a location
The projector supports 4 viewing setups. Choose the best one for 
your environment. If you install the projector in a rear or overhead 
position, you’ll need to choose the correct projection option, 
identified below, from the Extended menu. See the User’s Guide 
on your CD-ROM for instructions. 
 
 Table 
 Convenient for temporary front projection. 
 Choose Front from the menu.
 Ceiling 
 Professional installation recommended.  
 Choose Front /Ceiling from the menu.
 Rear 
   For...

5	Adjust the image
 1   To raise the image, press the foot adjust button and lift the front 
of the projector. Release the button to lock the foot in the position 
you want. 
 2   Rotate the focus ring to sharpen the image. To change the image size, 
use the Wide and Tele buttons on the projector.
 
 3    If your image looks like  or , first make sure the projector 
is facing the screen squarely. Then, if necessary, press the  and  
buttons on the projector’s control panel until the image is corrected....

5	Adjust the image
 1   To raise the image, press the foot adjust button and lift the front 
of the projector. Release the button to lock the foot in the position 
you want. 
 2   Rotate the focus ring to sharpen the image. To change the image size, 
use the Wide and Tele buttons on the projector.
 
 3    If your image looks like  or , first make sure the projector 
is facing the screen squarely. Then, if necessary, press the  and  
buttons on the projector’s control panel until the image is corrected....

5	Adjust the image
 1   To raise the image, press the foot adjust button and lift the front 
of the projector. Release the button to lock the foot in the position 
you want. 
 2   Rotate the focus ring to sharpen the image. To change the image size, 
use the Wide and Tele buttons on the projector.
 
 3    If your image looks like  or , first make sure the projector 
is facing the screen squarely. Then, if necessary, press the  and  
buttons on the projector’s control panel until the image is corrected....