Epson Powerlite S1 Technical Specifications

EPSON PowerLite S1 Projector
10 - EPSON PowerLite S1 Projector 5/03
Using the Menus
The on-screen menus let you adjust and customize the projector 
features from the remote control:
❏
Image controls the look and quality of the projected image 
(from a computer or video source). 
❏
Setting adjusts features such as the keystone setting, blank 
screen color, sleep mode, and rear or ceiling projection. 
❏
Info provides information about the current projector and 
lamp settings.
❏
Reset restores the factory...

EPSON PowerLite S1 Projector
5/03 EPSON PowerLite S1 Projector - 11
Compatible computers
Windows: Windows 98/2000/Me/XP
Macintosh
: Mac OS 9.1 or later/OS X 10.1 or later
Note: The presentation remote receiver can only be connected to 
computers with a standard USB interface. 
Some computer settings may have to be changed for the mouse 
function to be used. See your computer’s documentation for details.
Replacing Remote Control Batteries
When the battery in the remote control or presentation remote...

EPSON PowerLite S1 Projector
12 - EPSON PowerLite S1 Projector 5/03 2. Turn the projector upside-down and use a small vacuum 
cleaner designed for computers and other office equipment. 
If you don’t have one, use a dry, lint-free cloth.
Note: If the air filter is difficult to clean or if it is broken, it should 
be replaced. See the next section for instructions. 
Spare lamps are provided with new air filters. When replacing the 
lamp, please replace the air filter at the same time.
Replacing the Air...

EPSON PowerLite S1 Projector
5/03 EPSON PowerLite S1 Projector - 13 Follow these steps to replace the lamp:
1. Turn off the projector, let it cool down, and unplug the 
power cord.
2. Allow the projector to continue cooling for at least one hour 
(if it has been on).
3. Turn the projector upside-down. Push in the tabs on the 
lamp cover and push it up to remove it. 
4. Use a screwdriver to loosen the two screws securing the 
lamp; you can’t remove the screws. 
5. Remove the lamp.6. Position the new lamp...

EPSON PowerLite S1 Projector
14 - EPSON PowerLite S1 Projector 5/03 Resetting the Lamp Timer
After you install a new lamp, you need to reset the timer so the 
projector can keep track of how many hours it has been used. 
Note:
Reset the lamp timer only after you install a new lamp. If you reset 
it at any other time, the projector will not indicate the correct 
number of lamp usage hours.
Follow these steps:
1. Make sure the power cord is connected to the projector and 
to an electrical outlet. 
2. Turn...