Epson Powerlite S1 Technical Specifications

							EPSON PowerLite S1 Projector
10 - EPSON PowerLite S1 Projector 5/03
Using the Menus
The on-screen menus let you adjust and customize the projector 
features from the remote control:
❏
Image controls the look and quality of the projected image 
(from a computer or video source). 
❏
Setting adjusts features such as the keystone setting, blank 
screen color, sleep mode, and rear or ceiling projection. 
❏
Info provides information about the current projector and 
lamp settings.
❏
Reset restores the factory defaults to all the projector 
settings and lets you reset the lamp timer when you’ve 
replaced the projector’s lamp.
Changing Menu Settings
You use the Menu, e, and Esc buttons on the remote control 
to change menu settings.
1. Press the 
Menu button. The top configuration menu is 
displayed.
2. Press the u or d buttons to select the Top Menu item.
3. Press the e button. Sub Menu 1 is displayed.
4. Press the u or d buttons to select the Sub Menu 1 items, 
then press the e button.
5. For Sub Menu 2, press the u or d buttons in the same way, 
then press the e button.
6. Settings can be changed in the follwing ways:
❏Press the l or r buttons to change the setting values.
❏Press the u or d buttons to select the menu item.
Then press the e button.
The current setting has a green dot by the name and the 
current menu selection is highlighted in orange. 
Press the e button to confirm the selection.
❏Press the l or r buttons to select the value. 
Then, press the e button.
❏Press the u d l r buttons to move the image display 
position.
7. Set other items in the same way.
Press the 
Esc button to return to the previous item or menu, 
or select 
Return.
8. Press the 
Menu button to finish.
Note: The   mark is displayed after items which perform a setting 
or lead to a sub menu.
Using the Presentation Remote 
Operate the presentation remote control by aiming it at the 
presentation remote receiver.
When using the Freeze or A/V Mute functions, aim the 
presentation remote control towards the infrared receiver on the 
projector.
Note: If the mouse button settings are reversed on the computer, the 
operation of the remote control buttons will also be reversed.
You can use the presentation remote control as a wireless mouse 
to control the mouse pointer on the computer screen.The 
presentation remote contains all the functions necessary for 
giving a presentation. Functions include: Page Up/Page Down, 
Left/Right mouse click, A/V mute, freeze, and mouse pointer. 
Acts as a 
left-click
Keeps the 
current 
computer or 
video image 
on the screen Press to scroll 
back and forth 
through pages 
when 
projecting a 
presentation
Temporarily 
turns off/on 
the audio and 
videoTo move the 
mouse pointer, 
move in any of 
the following
directions: up, 
down, left, 
right, 
diagonally
Acts as a 
right-click
Double click: 
push twice
Drag and drop: 
press and hold 
and move the 
mouse pointer
Before using the 
presentation remote 
control, remove the 
insulation tape. 
						

							EPSON PowerLite S1 Projector
5/03 EPSON PowerLite S1 Projector - 11
Compatible computers
Windows: Windows 98/2000/Me/XP
Macintosh
: Mac OS 9.1 or later/OS X 10.1 or later
Note: The presentation remote receiver can only be connected to 
computers with a standard USB interface. 
Some computer settings may have to be changed for the mouse 
function to be used. See your computer’s documentation for details.
Replacing Remote Control Batteries
When the battery in the remote control or presentation remote 
control runs out, follow the steps below to replace it. Each 
remote requires one CR2025 lithium battery.
1. Remove the battery holder.
2. Remove the old battery and insert the new one. Make sure 
the 
+ side of the battery is facing up, as shown.
3. Slide the battery holder back 
into the remote control until 
it clicks into place.
Caution:
When replacing the battery, take the following precautions:
❑Replace the battery as soon as it runs out. 
❑If the battery leaks, wipe away battery fluid with a soft cloth. If 
fluid gets on your hands, wash them immediately.
❑Remove the battery if you will not be using the remote for a 
long period of time.
❑Dispose of the used battery in accordance with your local 
regulations.
Cleaning the Lens
Clean the lens whenever you notice dirt or dust on the surface.
❏To remove dust, use a canister of compressed air to spray the 
lens surface, or lightly wipe the lens surface with a soft, dry, 
lint-free cloth. 
❏To remove dirt or smears, use lens-cleaning paper. If 
necessary, moisten a soft cloth with an alcohol-based cleaner 
and gently wipe the lens surface.
Caution:
Do not rub the lens with harsh material or subject it to shocks, as it 
can be easily damaged.
Cleaning the Projector Case
Before you clean the projector case, turn off the projector and 
unplug the power cord. 
❏To remove dirt or dust, wipe the outside with a soft, dry, 
lint-free cloth. 
❏To remove stubborn dirt or stains, clean the case using a soft 
cloth moistened with water and a neutral detergent. Dry it 
using a separate cloth.
Caution:
Do not use alcohol, benzene, thinner, wax, or other chemicals. 
These can damage the case.
Cleaning the Air Filter
If the air filter becomes clogged with dust, it can cause 
overheating and damage the projector. Follow these steps to 
clean the filter:
1. Turn off the projector, let it cool down, and unplug the 
power cord.
Press here and slide 
out battery holder
New battery
Old battery
+ Mark 
						

							EPSON PowerLite S1 Projector
12 - EPSON PowerLite S1 Projector 5/03 2. Turn the projector upside-down and use a small vacuum 
cleaner designed for computers and other office equipment. 
If you don’t have one, use a dry, lint-free cloth.
Note: If the air filter is difficult to clean or if it is broken, it should 
be replaced. See the next section for instructions. 
Spare lamps are provided with new air filters. When replacing the 
lamp, please replace the air filter at the same time.
Replacing the Air Filter
If you need to replace the air filter, you can obtain it in the 
following ways:
❏Purchase one from your dealer
❏Call EPSON at (800) 873-7766 or visit the EPSON Store
SM 
at www.epsonstore.com (U. S. sales only). In Canada, please 
call (800) 463-7766 for dealer referral.
Note:
If you are also replacing the lamp, you can use the new air filter 
that comes with it.
Follow these steps to replace the air filter:
1. Turn off the projector and wait for it to cool down.
2. Disconnect the power cord.
3. Turn the projector upside-down. Push in the tab on the air 
filter cover and lift up the air filter cover to remove it. 4. Replace the air filter with a new one. Make sure there are no 
gaps between the air filter and the plastic grill. 
5. Insert the air filter cover tabs, and then press down on the 
opposite side until it clicks into place. 
Replacing the Lamp
The projection lamp typically lasts for about 2000 hours of use. 
It is time to replace the lamp when:
❏The projected image gets darker or starts to deteriorate.
❏The   error light on top of the projector is flashing red 
in 0.5-second intervals. 
❏The message 
LAMP REPLACE appears on the screen when 
the projector lamp comes on (after about 1900 hours of use). 
To maintain projector brightness and image quality, replace 
the lamp as soon as possible after you see the message.
Request replacement lamp part number V13H010125.
Note:
To view the number of hours your lamp has been used, check the 
About menu.
Warning: 
Be extremely careful when removing the lamp module. Let the lamp 
cool before replacing it. If the lamp breaks, handle the shards 
carefully to avoid injury. In the unlikely event that the bulb has 
ruptured, small glass fragments may be present and should be 
removed with caution. If your projector is mounted on the ceiling, 
you should unmount it before accessing the lamp compartment. 
This will make it easier for you to replace the lamp and minimize 
the chance of any small glass fragments dropping from the projector. 
						

							EPSON PowerLite S1 Projector
5/03 EPSON PowerLite S1 Projector - 13 Follow these steps to replace the lamp:
1. Turn off the projector, let it cool down, and unplug the 
power cord.
2. Allow the projector to continue cooling for at least one hour 
(if it has been on).
3. Turn the projector upside-down. Push in the tabs on the 
lamp cover and push it up to remove it. 
4. Use a screwdriver to loosen the two screws securing the 
lamp; you can’t remove the screws. 
5. Remove the lamp.6. Position the new lamp correctly, then gently insert it into the 
projector. Press it into place and tighten the retaining screws. 
7. Insert the lamp cover tabs, then press down until the lamp 
cover clicks back into place. 
Caution:
Make sure the lamp cover is securely fastened; the  error 
light flashes and the projector lamp won’t turn on if the cover 
is open.
8. Follow the instructions below to reset the lamp timer to zero.
Note: A new air filter is included with the lamp. If your current air 
filter is old, replace it with the new one when you replace the lamp. 
						

							EPSON PowerLite S1 Projector
14 - EPSON PowerLite S1 Projector 5/03 Resetting the Lamp Timer
After you install a new lamp, you need to reset the timer so the 
projector can keep track of how many hours it has been used. 
Note:
Reset the lamp timer only after you install a new lamp. If you reset 
it at any other time, the projector will not indicate the correct 
number of lamp usage hours.
Follow these steps:
1. Make sure the power cord is connected to the projector and 
to an electrical outlet. 
2. Turn on the projector and wait for it to warm up.
3. Press the 
Menu button on the remote control. You see the 
main menu.
4. Select the 
Reset menu. You see the lamp usage hours and 
other settings.
5. Select 
Lamp Hours Reset. You see this prompt:
6. Select 
Yes, then press Enter.
7. When you’re finished, press 
Esc or Menu. 
The lamp usage timer doesn’t register until you’ve used the 
lamp for at least 10 hours. 
Optional Accessories 
EPSON provides the following optional accessories: 
You can purchase these accessories from your dealer, or by 
calling EPSON at (800) 873-7766, or by visiting the EPSON 
Store at www.epsonstore.com (U.S. sales only). In Canada, 
please call (800) 463-7766 for dealer referral. 
Related Documentation
CPD-16290EPSON PowerLite S1 Projector Quick
Setup Poster
CPD-16302 CD-ROM containing the 
EPSON PowerLite S1 User’s Guide
Parts Price Lists Available on the EPSON Insider Website 
only
Product Product number
V13H010125 Replacement lamp
V13H134A03  Air filter set (5 filters)
V12H007T11 Projector remote control
V12H007T09 Presentation remote control kit (connects 
to a PC or Mac and includes a receiver and 
remote)
ELPSC06 50” Portable screen (4:3 aspect ratio) 
ELPSC07 60” Portable pop-up screen (4:3 aspect 
ratio) 
ELPSC08 80” Portable pop-up screen (4:3 aspect 
ratio) 
ELPAP01 Mac adapter set (used to convert a 
Macintosh D-sub 15-pin plug into a mini D-
sub 15-pin plug) 
ELPMB42 Ceiling mount 
ELPMBAPL Suspension adapter 
ELPMBFCP False ceiling plate
ELPSV01 S-Video cable 
ELPKC19 Component video cable (9.8 feet/3 m) for 
mini D-Sub 15-pin/RCA×3 
ELPDA01 Distribution amplifier 
ELPKS35 Samsonite wheeled softcase 
ELPKS43 Samsonite soft shoulder case for projector 
and laptop 
ELPKS49 ATA molded hardshell case 
ELPDC02 High resolution document imager 
V12H064020 High resolution document camera 
ELPSL01 Kensington security lock