Epson Powerlite Home Cinema 750hd Users Guide

Using
BasicProjector Features
 Follow
theinstructions inthese sections touse your projectors basicfeatures.
 Turning
Onthe Projector
 Turning
Offthe Projector
 Viewing
3DImages
 Selecting
theLanguage forthe Projector Menus
 Adjusting
theImage Height
 Image
Shape
 Resizing
theImage WiththeZoom Ring
 Focusing
theImage UsingtheFocus Ring
 Remote
ControlOperation
 Selecting
anImage Source
 Projection
Modes
 Image
Aspect Ratio
 Color
Mode
 Controlling
theVolume withtheVolume Buttons
 Projecting
aPC Free...

2.
Connect thepower cordtothe projectors powerinlet.
 3.
Plug thepower cordintoanelectrical outlet.
 The
projectors powerlightturns orange. Thisindicates thattheprojector isreceiving power,butis
 not
yetturned on(itisin standby mode).
 Note:
WithDirect Power Onturned on,theprojector turnsonassoon asyou plug itin.
 4.
Press thepower button onthe projector orthe remote controltoturn onthe projector.
 The
projector beepsandthepower lightflashes greenasthe projector warmsup.Once theprojector
 is
warmed...

•
Insert aDVD orother video media, andpress theplay button (ifnecessary).
 •
Press theSource Searchbuttononthe projector orremote controltodetect thevideo source.
 •
Press thebutton forthe video source onthe remote control.
 Parent
topic:UsingBasicProjector Features
 Related
references
 Projector
SetupSettings -Extended Menu
 Related
tasks
 Selecting
anImage Source
 Turning
Offthe Projector
 Before
turning offthe projector, shutdown anycomputer connected toitso you canseethecomputer
 display...

3.
Totransport orstore theprojector, makesurethepower lightisorange (butnotflashing), then
 unplug
thepower cord.
 Caution:
Toavoid damaging theprojector orlamp, never unplug thepower cordwhen thepower
 light
isgreen orflashing orange.
 4.
Close theprojectors lenscover.
 Parent
topic:UsingBasicProjector Features
 44   

Viewing
3DImages
 You
canview 3Dimages usingyourprojector.
 1.
Connect a3D-compatible videodevice tothe projector usingacompatible HDMIcable.
 2.
Turn onthe video device, thenturnonthe projector.
 3.
Begin playback fromthevideo device.
 Note:
Makesureyousetthe video device toplay content in3D mode.
 4.
Press the2D/3D buttononthe remote controltoactivate 3Dmode, ifnecessary.
 5.
Slide thepower switch onthe 3Dglasses tothe Onposition.
 6.
Putonthe 3Dglasses. Ifyou donot see a3D image, pairtheglasses...

Related
tasks
 Connecting
toan HDMI Video Source
 Connecting
toaComputer forHDMI Video andAudio
 Pairing
the3DGlasses withtheProjector
 Pair
theglasses withtheprojector toestablish communication betweenthemfor3D viewing.
 1.
Turn onthe projector.
 2.
Settheimage source toHDMI.
 3.
Slide thepower switch onthe 3Dglasses tothe Onposition.
 4.
Move theglasses within10feet (3m) ofthe projector, thenholddown thePairing buttononthe
 glasses
foratleast three seconds.
 The
status lightonthe glasses...

Charging
the3DGlasses
 Charge
theglasses whenthestatus lightonthe glasses flashesredtoindicate alow battery.
 1.
Connect thesmaller endofthe charging cabletothe port onthe bridge ofthe glasses.
 Note:
Makesureyouconnect thecable inthe correct orientation oryou may damage theglasses or
 cable.

2.
Connect theother endofthe cable tothe USB-A portonthe projector.
 Note:
Theprojector mustbeturned ontocharge theglasses.
 The
glasses arefully charged whenthestatus lightonthe glasses staysgreen.
 Parent...

1
 32
ft(10 m)
 Parent
topic:Viewing 3DImages
 Selecting
theLanguage forthe Projector Menus
 If
you want toview theprojectors menusandmessages inanother language, youcanchange the
 Language
setting.
 1.
Turn onthe projector.
 2.
Press theMenu button.
 48  

3.
Select theExtended menuandpress Enter.
 4.
Select theLanguage settingandpress Enter.
 5.
Select thelanguage youwant touse and press Enter.
 6.
Press Menu orEsc toexit themenus.
 Parent
topic:UsingBasicProjector Features
 Adjusting
theImage Height
 If
you areprojecting fromatable orother flatsurface, andtheimage istoo high orlow, youcanadjust
 the
image heightusingtheprojectors adjustablefeet.
 1.
Turn onthe projector anddisplay animage.
 2.
Toadjust thefront foot,pulluponthe foot release...

The
footextends fromtheprojector.
 3.
Release thelever tolock thefoot.
 4.
Ifthe image istilted, rotate therear feettoadjust theirheight.
 If
the projected imageisunevenly rectangular, youneed toadjust theimage shape.
 Parent
topic:UsingBasicProjector Features
 Related
concepts
 Image
Shape
 Image
Shape
 You
canproject anevenly rectangular imagebyplacing theprojector directlyinfront ofthe center ofthe
 screen
andkeeping itlevel. Ifyou place theprojector atan angle tothe screen, ortilted upordown,...