Epson Powerlite Home Cinema 1080 Ub Users Guide
Have a look at the manual Epson Powerlite Home Cinema 1080 Ub Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Specifications61 Specifications General Type of display Poly-silicon TFT active matrix Size of LCD panels 0.74 inch (18 mm) wide Lens F=2.0 to 3.17 Resolution (native format) 1920 × 1080 pixels, 1080p Brightness 1600 ANSI lumens maximum Contrast ratio 50,000:1 with Auto Iris on, for select color modes Image size 30 to 150 inches Projection distance 2.8 to 31.4 feet (0.87 to 9.57 m) at 16:9 3.5 to 38.4 feet (1.06 to 11.70 m) at 4:3 Zoom ratio 1-2.1 Aspect ratio 16:9 or 4:3 Fan noise level 24 dB (in low brightness mode, for select color modes) to 32 dB (in high brightness mode, for select color modes) Lamp Note: Lamp life results will vary depending on mode selected, environmental conditions, and usage. Turn off this product when not in use to prolong the life of the projector. Type UHE (Ultra High Efficiency), E-TORL Power consumption 170 W Lamp life 2500 hours (in high brightness mode, for select color modes) to 3000 hours (in low brightness mode, for select color modes), depending on usage Part number V13H010L39 Remote Control Range Approximately 30 feet (10 m) Batteries AA × 2
62Specifications Dimensions Height 4.9 inches (124 mm); not including adjustable feet Width 16 inches (406 mm) Depth 12.2 inches (310 mm); not including lens protrusion Weight 12.3 lb (5.6 kg) Electrical Rated frequency 50/60 Hz AC Power supply 100 to 120 VAC, 2.7 A 200 to 240 VAC, 1.2 A Power consumption Operating: 245 W (100 to 120V), 240 W (200 to 240 V) Standby: 4 W (100 to 120V), 5 W (220 to 240 V) Environmental Temperature Operating: 41 to 95 °F (5 to 35 °C) Storage: 14 to 140 °F (–10 to 60 °C) Humidity Operating: 20 to 80% RH, non-condensing Storage: 10 to 90% RH, non-condensing Operating altitude up to 7500 feet (up to 2286 meters) Safety United States FCC Part 15B Class B (DoC) UL60950-1 Canada ICES-003 Class B CSA C22.2 No. 60950-1 Pixelworks DNX ™ ICs are used in this projector.
Specifications63 Compatible Video Formats The projector supports analog video in NTSC, PAL, and SECAM formats, and it automatically adjusts to the incoming signal. It can receive these formats as composite video, S-video, or component video— which it accepts through the Video, S-Video, and Component ports, respectively. The projector also supports digital video (SDTV, HDTV) and various monitor display formats. Digital video is accepted by the HDMI and Component video ports. The PC port accepts analog RGB computer monitor signals. If necessary, you can select a different Aspect setting to optimize the image. The resolution at which the image displays for a given setting depends on the currently active picture source, as listed in the following tables. Composite video or S-Video Component video Note: The signal name refers to the total number of visible scan lines and the display mode (interlaced or progressive), as defined by the signal format. FormatAspect setting ResolutionNormal (4:3) FullZoom (16:9)Wide (16:9) NTSC720 × 480 720 × 360 1440 × 1080 1920 × 1080 1920 × 1080 1920 × 1080 PAL or SECAM720 × 576 720 × 432 1440 × 1080 1920 × 1080 1920 × 1080 1920 × 1080 Format/ SignalAspect setting Resolution Normal Full Zoom Wide SDTV 480i 625i 480p 625p720 × 480 720 × 576 720 × 480 720 × 576(4:3) 1440 × 1080 1440 × 1080 1440 × 1080 1440 × 10801920 × 1080 1920 × 1080 1920 × 1080 1920 × 1080(16:9) 1920 × 1080 1920 × 1080 1920 × 1080 1920 × 1080(16:9) 1920 × 1080 1920 × 1080 1920 × 1080 1920 × 1080 HDTV 720p 1080i 1080p1280 × 720 1920 × 1080 1920 × 1080(16:9) 1920 × 1080 1920 × 1080 1920 × 1080-- -- --
64Specifications Analog RGB * HDMI input signalsSignal (4:3)Aspect setting Resolution Normal Full Zoom Wide VGA* 640 × 480 1440 × 1080 1920 × 1080 1920 × 1080 1920 × 1080 VESA 640 × 480 1440 × 1080 1920 × 1080 1920 × 1080 1920 × 1080 SVGA 800 × 600 1440 × 1080 1920 × 1080 1920 × 1080 1920 × 1080 XGA 1024 × 768 1440 × 1080 1920 × 1080 1920 × 1080 1920 × 1080 SXGA1280 × 1024 1280 × 9601350 × 1080 1440 × 10801920 × 1080 1920 × 10801920 × 1080 1920 × 10801920 × 1080 1920 × 1080 WXGA 1280 × 768 1360 × 7681800 × 1080 1912 × 10801920 × 1080 1920 × 10801920 × 1080 1920 × 10801920 × 1080 1920 × 1080 MAC13” MAC16” MAC19”640 × 480 832 × 624 1024 × 7681440 × 1080 1440 × 1080 1440 × 10801920 × 1080 1920 × 1080 1920 × 10801920 × 1080 1920 × 1080 1920 × 10801920 × 1080 1920 × 1080 1920 × 1080 SDTV* 480i 480p 625i 625p720 × 480 720 × 480 720 × 576 720 × 5761440 × 1080 1440 × 1080 1440 × 1080 1440 × 1080-- 1920 × 1080 1920 × 1080 1920 × 1080 1920 × 10801920 × 1080 1920 × 1080 1920 × 1080 1920 × 1080 HDTV* 720p 1080i 1080p1280 × 720 1920 × 1080 1920 × 10801920 × 1080 1920 × 1080 1920 × 1080-- -- --
Specifications65 ESC/VP21 Command Codes You can use an AV controller with a 9-pin null modem serial cable to control the projector. You can download the complete ESC/VP 21 Communication Manual for home theater projectors from the Epson website at epson.com/support. Following are some of the available codes: ItemCommand Power ON/OFF ON PWR ON OFF PWR OFF A/V Mute ON/OFF ON MUTE ON OFF MUTE OFF A/V Mute selection Black MSEL 00 Blue MSEL 01 Source changeTerminal Signal name Component Component video SOURCE 10 YCbCr SOURCE 14 YPbPr SOURCE 15 Auto SOURCE 1F PC HDB15 SOURCE 20 RGB SOURCE 21 HDMI1 HDMI SOURCE 30 HDMI2 HDMI SOURCE A0 Video Video/S-Video SOURCE 40 Video (RCA) SOURCE 41 S-Video SOURCE 42 Input 5 Digital video SOURCE C0 YCbCr SOURCE C4 YPbPr SOURCE C5 Auto SOURCE CF Color Mode Theatre CMODE 05 Living Room CMODE 06 Natural CMODE 07 Dynamic CMODE 08 Theatre Black 1 CMODE 09 Theatre Black 2 CMODE 0A
66Specifications Aspect ratio Auto ASPECT 00 Normal ASPECT 20 Full ASPECT 21 Zoom ASPECT 22 Wide ASPECT 25 ItemCommand
Notices67 Notices Important Safety Information Follow these safety instructions when setting up and using the projector: ■Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. ■Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages inside the projector can severely injure you. ■Except as specifically explained in this User’s Guide, do not attempt to service this product yourself. Refer all servicing to qualified service personnel. ■The projector and its accessories come packaged in plastic bags. Keep plastic bags away from small children to avoid any risk of suffocation. ■Don’t place the projector on an unstable cart, stand, or table. Also, don’t use the projector near water or sources of heat. ■Use the type of power source indicated on the projector. If you’re not sure of the power available, consult your dealer or power company. ■Place the projector near a wall outlet where the plug can be easily unplugged. ■Don’t insert the plug into an outlet with dust present, and insert the plug firmly into the outlet. Failure to do so could result in sparks or fire. ■Don’t overload wall outlets, extension cords, or integral convenience receptacles. This can cause fire or electric shock. ■Don’t block the slots and openings in the projector case. They provide ventilation and prevent the projector from overheating. Don’t operate the projector on a sofa, rug, or other soft surface, or in a closed-in cabinet unless proper ventilation is provided. ■Never push objects through the cabinet slots or spill liquid into the projector. ■Unplug the projector from the wall outlet and refer servicing to qualified service personnel under the following conditions: when the power cord or plug is damaged or frayed; if liquid has been spilled into the projector, or if it has been exposed to rain or water; if it doesn’t operate normally when you follow the operating instructions, or if it exhibits a distinct change in performance, indicating a need for service; if it has been dropped or the housing has been damaged. ■Don’t place the projector where the cord can be walked on. This may result in fraying or damage to the plug. ■Unplug the projector from the wall outlet before cleaning. Use a damp cloth for cleaning. Do not use liquid or aerosol cleaners.
68Notices ■ The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash. ■Allow the lamp to cool for one hour before replacing it. ■Unplug the projector during lightning storms or when not in use for extended periods. ■Don’t place the projector or remote control on top of heat-producing equipment. ■If you use the projector in a country other than where you purchased it, use the correct power cord for that country. ■Don’t stand on the projector or place heavy objects on it. ■Don’t use the projector outside of the required temperature range of 41 to 95 °F (5 to 35 °C). Doing so may cause an unstable display and could lead to projector damage. ■Don’t store the projector outside of the required temperature range of 14 to 140 °F (–10 to 60 °C) or in direct sunlight for long periods of time. Doing so may cause damage to the case. WARNING: The cords included with this product contain chemicals, including lead, known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. (posted in accordance with Proposition 65 in Cal. Health & Safety Code § 2549.5 et seq)
Notices69 FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ■Reorient or relocate the receiving antenna. ■Increase the separation between the equipment and receiver. ■Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ■Consult the dealer or an experienced radio/TV technician for help. WARNING The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification of this device and may cause interference levels which exceed the limits established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded equipment interface cable with this device. If this equipment has more than one interface connector, do not leave cables connected to unused interfaces. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. For Canadian Users This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
70Notices Declaration of Conformity According to 47CFR, Part 2 and 15 for Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers: We: Epson America, Inc. Located at: 3840 Kilroy Airport Way MS 3-13 Long Beach, CA 90806-2469 Telephone: (562) 290-5254 Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on a statistical basis as required by 47CFR §2.909. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Trade Name: Epson Type of Product: Projector Model: H262A Marketing Name: PowerLite Home Cinema 1080 UB