Epson Powerlite Home Cinema 1080 Ub Users Guide

							Making Detailed Adjustments41
■Tracking
Note: This setting only appears when a computer signal is being input to the PC port.
Adjust the tracking to eliminate vertical bands. It is easiest to 
adjust the tracking when the image contains a lot of fine detail 
(such as black text on a white background).
■Sync.
Note: This setting only appears when a computer signal is being input to the PC port.
Adjust the synchronization to eliminate blurriness. For best results, 
make sure the tracking is properly adjusted first.
SignalÆTracking
SignalÆSync. 
						

							42Making Detailed Adjustments
Selecting Memory Settings and Resetting the 
Projector
Your projector comes with 10 memory locations for installers to save customized settings, 
designed to provide the best color quality for each of your video inputs. 
Selecting Memory Settings
You can easily recall the memory settings by using the 
memory button on the remote control.
1. Press the 
Memory button on the remote control. 
2. Select 
Load Memory.
3. Use the arrow buttons to select the desired setting, then 
press the 
Select button. 
After a moment, the image appears on the screen using 
your selected setting.
Creating Memory Settings
Memory settings store the Brightness and Contrast settings, Color Mode, and other color 
settings described on pages 38 and 40.
1. Press the 
Menu button on the remote control.
2. Open the 
Memory menu, then select Save Memory.
3. Select the memory name you want to use, then press the 
Select button to save your 
settings.
Note: Saved settings are indicated by a green  highlight next to the memory name. If you select 
a name that is already in use, the existing settings will be erased and new ones saved in their 
place. 
Memory 
button 
						

							Making Detailed Adjustments43
Deleting Saved Memory Settings
You can clear all your memory settings at once.
1. Press the 
Menu button on the remote control.
2. Open the 
Reset menu, then select Reset Memory.
3. Press the 
Select button to delete the memory settings.
Note: You can delete memory settings one at a time with the Erase Memory setting under the 
Memory menu.
Resetting the Projector
If the image quality isn’t what you expect, one or more settings may be adjusted improperly. 
If necessary, you can restore the projector to its factory-default (original) settings. 
To restore the settings in a specific menu (such as the Image or Settings menu), open that 
menu, select 
Reset, and confirm as needed. The example below shows how to reset the 
Image menu settings:
You can also reset the lamp usage timer or restore all the projector settings to their original 
values. Follow these steps:
1. Press the 
Menu button on the remote control.
2. Open the 
Reset menu.
3. Do one of the following:
■Select Reset Lamp Hours to clear the lamp usage timer and reset it to zero. 
You should reset the lamp timer only when you install a new projector lamp. See 
page 52 for more information.
Open the Image 
menu . . .
...and select 
Reset 
						

							44Making Detailed Adjustments
■Select Reset Memory to clear all memory settings.
■Select Reset All to return all projector settings to their original defaults (except 
Component, Save Memory, Language, and Lamp).
Customizing Projector Features
Use the settings in this section to adjust the image size and position, suppress on-screen text, 
and select basic setup options.
Image Sizing
Before adjusting any of these settings, make sure you have already selected an appropriate 
aspect ratio for the type of picture you’re viewing (see page 28). 
■Output Scaling
For component video formats, this setting lets you see the edges of the image that are not 
normally visible in the picture (see page 63). 
■Position
Use the arrow buttons to fine-tune the position of the image on the screen.
■Zoom Caption Pos.
Lets you adjust the shape and position of the image so that subtitles are visible (available 
only if the aspect ratio has been set to Zoom). Use 
Zoom Size to adjust the proportions 
of the image, and 
Zoom Caption Pos. to move the image up or down. You can adjust 
output scaling before zoom position.
■Aspect
This setting lets you change the aspect ratio of your image, and works the same as 
pressing the 
Aspect button on the remote control. See page 28 for more information.
SignalÆOutput Scaling
SignalÆPosition
SignalÆZoom Caption Pos.
SignalÆAspect 
						

							Making Detailed Adjustments45
Screen Options
■Messages
Turn this setting off if you want to prevent on-screen messages from appearing (such as 
the no-signal message, or the identifying text that appears when you switch between 
image sources or color modes). 
■Startup Screen
Turn this setting off if you want to prevent the startup screen from appearing while the 
projector is warming up.
■Display Background
Changes the screen that’s used when the projector is not receiving a signal or when you 
press the 
Blank button to temporarily stop projection.
Other Setup Options
■Projection
You can select different options for projecting the image: Front, Front/Ceiling, Rear, 
Rear/Ceiling.
■Direct Power On
Sets projection to start when the main power switch is turned on, without pressing the 
On button on the remote control or the PPower button on the projector. 
Note: When direct power on is enabled, power surges that occur after a power outage can 
cause the projector to turn on.
■Video Signal
Leave this setting on Auto so the projector can automatically interpret the format, such as 
NTSC or PAL (for standard TV formats). 
SettingsÆDisplayÆMessages
SettingsÆDisplayÆStartup Screen
SettingsÆDisplayÆDisplay Background
SettingsÆProjection
SettingsÆDirect Power On
SettingsÆInput SignalÆVideo Signal 
						

							46Making Detailed Adjustments
■Component
Change this setting to match the type of equipment connected to the Component port. 
For component video, select 
Auto to let the projector automatically interpret the signal; 
or select 
YCbCr or YPbPr to manually select your video equipment’s signal. Use YCbCr 
for digital movie camera input. Use 
YPbPr for DVD or satellite input.
■Trigger Out
Turn on this setting if you want the Trigger out port to output a 12-volt signal while 
the projector is operating. You can use this to raise or lower your projection screen.
■Sleep Mode
Turn off this setting if you don’t want the projector to enter sleep mode. (Sleep mode 
shuts the projector off automatically when there is no video signal.) 
Select 
5min., 10 min., or 30 min. as the length of time before shutoff; decreasing the 
time conserves power and extends the life of the lamp. 
To turn the projector back on, press the 
On button on the remote control, or press the 
P
Power button on the projector.
■Child Lock
Lets you lock the PPower button on the projector’s control panel to make it more 
difficult for a child to turn on the projector. See page 32 for more information.
■Control Panel Lock
Lets you disable all the buttons on the projector’s control panel to prevent the image from 
being accidentally changed once it is adjusted. See page 32 for more information.
■High Altitude Mode
Adjusts the speed of the fan so it can properly cool the projector at altitudes above 4900 
feet (1500 meters).
SettingsÆInput SignalÆComponent
SettingsÆTrigger Out
SettingsÆSleep Mode
SettingsÆChild Lock
SettingsÆControl Panel Lock
SettingsÆHigh Altitude Mode 
						

							Maintenance47
Maintenance
Your projector needs little maintenance. All you need to do on a regular basis is keep the lens 
clean. You also may need to clean the air filter to prevent overheating.
Warning: Before you clean any part of the projector, turn it off and unplug the power cord. Never 
open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages 
in the projector can injure you severely. Do not try to service this product yourself, except as 
specifically explained in this User’s Guide. 
The only parts you should replace are the air filter and the lamp. If another part needs 
replacing, contact your dealer or a qualified servicer.
Cleaning the Lens
Clean the lens whenever you notice dirt or dust on 
the surface.
■Use a canister of compressed air to remove dust.
■To remove dirt or smears, use lens-cleaning 
paper. If necessary, moisten a soft cloth with lens 
cleaner and gently wipe the lens surface.
Caution: Never rub the lens with abrasive materials. 
						

							48Maintenance
Cleaning the Projector Case
Before you clean the case, turn off the projector and unplug the power cord.
■To remove dirt or dust, wipe the case 
with a soft, dry, lint-free cloth.
■To remove stubborn dirt or stains, 
moisten a soft cloth with water and a 
neutral detergent. Then wipe the case 
and dry it with a dry cloth.
Caution: Never use wax, alcohol, benzene, 
thinner, or other chemical detergents. These can damage the case.
Cleaning and Replacing the Air Filter
Your projector includes an air filter to ensure the best performance. If dust collects on the air 
filter, clean it as described below. Dust clogs prevent proper ventilation and can cause 
overheating and damage the projector.
1. Press the P
Power button and wait for the PPower light to stop flashing. The projector 
cools down.
2. Turn off the projector using the power switch on the back.
3. Unplug the power cord and disconnect any cables.
4. Use a small vacuum cleaner that is designed for computers 
and other office equipment to clean the filter on the 
bottom of the projector. If you don’t have one, gently 
clean the filter using a very soft brush (such as a clean 
artist’s paintbrush).
If the dirt is difficult to remove or the filter is broken, 
replace it. You can purchase air filter part number 
V13H134A09 from an authorized Epson reseller. To find 
the nearest reseller, please call 800-GO-EPSON 
(800-463-7766). To purchase online, visit 
www.epsonstore.com (U.S. sales) or www.epson.ca 
(Canadian sales). 
						

							Maintenance49
5. If you need to replace the filter, release the tab and lift up the cover.
6. Remove the old filter and replace it with a new one.
7. To replace the cover, insert the tabs and press down until the cover clicks into place. 
						

							50Maintenance
Replacing the Lamp
The projection lamp lasts for up to 3000 hours. You can use the Info menu to check how 
long it’s been in use (see page 53). It’s time to replace the lamp when:
■The projected image gets darker or starts to 
deteriorate.
■The projector’s warning light flashes red at half-second 
intervals.
■The message Replace the lamp appears on the screen 
when you start projecting.
Note: Lamp life results will vary depending on mode selected, environmental conditions, and 
usage. 
Turn off this product when not in use to prolong the life of the projector.
You can purchase lamp part number V13H010L39 from an authorized Epson reseller. To 
find the nearest reseller, please call 800-GO-EPSON (800-463-7766). To purchase online, 
visit www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).
Be sure to read the “Important Safety Information” on page 67 before replacing the lamp. 
Warning: Let the lamp cool fully (about 1 hour) before replacing it. In the unlikely event that the 
lamp has broken, small glass fragments may be present and should be removed carefully to avoid 
injury. 
Caution: Never touch the glass portion of the lamp with your bare hands; the invisible residue left 
by the oil on your hands may shorten the lamp life. Use a cloth or glove to handle the new lamp.
Follow these steps to replace the lamp:
1. Press the P 
Power button and wait for the light to stop flashing. 
2. Turn off the power switch on the back of the projector.
3. Unplug the power cord and any cables.
4. Wait about an hour to make sure the lamp is no longer hot.
Warning 
light