Epson Powerlite Home 10 Technical Specifications

							EPSON PowerLite Home 10 Projector
7/03 EPSON PowerLite Home 10 Projector - 11 Follow these steps to replace the lamp:
1. Press the P 
Power button to turn the projector off, then 
wait for the P power light to stop flashing.
2. Unplug the power cord and disconnect any cables.
3. If the projector has been on, let it cool for at least one hour.
4. Turn the projector upside-down. Push in the tabs on the 
lamp cover and push it up to remove it.
5. Use a small screwdriver to loosen the two screws securing the 
lamp; you can’t remove the screws.
6. Grasp the lamp as shown and pull it straight out.7. Carefully insert the new lamp and tighten the retaining 
screws.
8. To replace the lamp cover, insert the tabs and then snap the 
cover into place. 
Note: Make sure the lamp cover is securely fastened. The  
warning light flashes and the projector lamp won’t turn on if 
the cover is open.
After replacing the lamp, you need to reset the lamp timer, as 
described in the next section.
Resetting the Lamp Timer
After you install a new lamp, you need to reset the timer so the 
projector can keep track of how many hours it has been used. 
Note: Reset the lamp timer only after you install a new lamp. If you 
reset it at any other time, the projector will not indicate the correct 
number of lamp usage hours.
Follow these steps:
1. Make sure the power cord is connected to the projector and 
to an electrical outlet. 
2. Turn on the projector and wait for it to warm up.
3. Press the 
Menu button on the projector or remote control. 
You see the main menu.
4. Select the 
Reset menu. You see the lamp usage hours and 
other settings.
5. Select 
Lamp Hours Reset. 
6. When you see a prompt asking whether you want to execute 
the command, highlight 
Yes and press the Select button.
7. When you’re finished, press 
Esc or Menu. 
The lamp usage timer doesn’t register until you’ve used the 
lamp for at least 10 hours. After that, the timer updates lamp 
usage in one hour increments. 
						

							EPSON PowerLite Home 10 Projector
12 - EPSON PowerLite Home 10 Projector 7/03
Transporting the Projector
When shipping the projector for repairs, use the original 
packaging material if possible. If you do not have the original 
packaging, use equivalent materials, placing plenty of 
cushioning around the projector. Be sure the carrier is capable 
of transporting fragile equipment and that it is aware that the 
projector is fragile.
Storing the Projector
If you need to store the projector for awhile, do the following:
❏Make sure the temperature and humidity of the storage area 
are within the recommended range for the projector (14 to 
140 °F and 10 to 90% relative humidity).
❏Attach the lens cover and retract the feet.
❏Remove the battery from the remote control
❏Store the remote control in the holder on the back of the 
projector.
❏Package the projector in its original or equivalent packaging.
Optional Accessories 
EPSON provides the following optional accessories: You can purchase these accessories from your dealer, by calling 
EPSON at (800) 873-7766, or by visiting the EPSON Store at 
www.epsonstore.com (U.S. sales only). In Canada, please call 
(800) 463-7766 for dealer referral. 
Related Documentation
CPD-16678EPSON PowerLite Home 10 Projector
Quick Setup poster
CPD-16677EPSON PowerLite Home 10 Projector
User’s Guide
CPD- 16789EPSON Extra Care
SM Home Service
warranty
Product Product number
V13H010L2H Replacement lamp
V13H134A04 Replacement air filter
V12H007T12 Projector remote control
ELPSC06 50” Portable screen (4:3 aspect ratio) 
ELPSC07 60” Portable pop-up screen (4:3 aspect ratio) 
ELPSC08 80” Portable pop-up screen (4:3 aspect ratio) 
ELPAP01 Mac adapter set (used to convert a Macintosh D-
sub 15-pin plug into a mini 
D-sub 15-pin plug) 
ELPMB42 Ceiling mount 
ELPMBAPL Suspension adapter 
ELPMBFCP False ceiling plate
ELPSV01 S-video cable 
ELPKS35 Samsonite
® wheeled softcase 
ELPKS43 Samsonite soft shoulder case 
ELPSL01 Kensington
® security lock