Epson Powerlite Home 10 Technical Specifications

EPSON PowerLite Home 10 Projector
7/03 EPSON PowerLite Home 10 Projector - 1
Projector PartsProjector Specifications 
General
Type of display Poly-silicon Thin Film Transistor (TFT)
active matrix with Micro Lens Array
Size of LCD panels Diagonal: 0.55 inches (14 mm)
Lens F=1.7 to 2.1 mm, f=13.9 to 21.4 mm
Focus adjustment Manual
Zoom ratio Digital 1.1 to 1.54, lens at maximum size
Resolution 854 × 480 pixels (480p native resolution) 
Color
reproduction 24 bit, 16.7 million colors
Brightness 1000 ANSI...

EPSON PowerLite Home 10 Projector
2 - EPSON PowerLite Home 10 Projector 7/03
Dimensions
Height 4.5 inches (114 mm)
Width 15.8 inches (402 mm)
Depth 11.6 inches (294 mm)
Weight approximately 7.9 lb (3.6 kg)
Electrical
Rated frequency 50/60 Hz
Power supply 100 to 120 V model: 100 to 120 VAC, 
2.3 A
200 to 240 V model: 200 to 240 VAC,
1.0 A
Power consumption Operating: 200 W at 100 VAC
Standby: 5 W at 100 VAC
Environmental
Temperature
(non-condensing) Operating: 41 to 95° F (5 to 35° C), 
Storage: 14 to...

EPSON PowerLite Home 10 Projector
7/03 EPSON PowerLite Home 10 Projector - 3
Positioning the Projector
Follow these guidelines to get the best results when projecting:
❏Place the projector on a sturdy, level surface, between 
2.5 and 38 feet from the screen.
❏Make sure there is plenty of space for ventilation around and 
under the projector.
❏Make sure the projector is within 10 feet of a grounded 
electrical outlet or extension cord and within 5 feet of the 
image source.
❏Face the projector squarely...

EPSON PowerLite Home 10 Projector
4 - EPSON PowerLite Home 10 Projector 7/03
Turning the Projector On and Off
Once you’ve connected the projector to your computer or other 
equipment, follow these instructions to turn it on and display 
an image:
1. Make sure the power is turned off for the projector and any 
sources connected to it.
2. Remove the lens cover.
3. Connect one end of the power cord to the projector and plug 
the other end into a grounded electrical outlet. 
The P 
Power light on the...

EPSON PowerLite Home 10 Projector
7/03 EPSON PowerLite Home 10 Projector - 5 2. If your image looks like   or  , press the   and   
buttons on the projector’s control panel until the image is 
corrected.
Note: You can only correct vertical distortion with this 
function. Also, the screen image becomes smaller when you 
perform keystone correction.
If the images become uneven in appearance, decrease the 
Sharpness setting in the projector’s Picture Quality menu.
3. Rotate the focus ring to sharpen the...

EPSON PowerLite Home 10 Projector
6 - EPSON PowerLite Home 10 Projector 7/03
Switching Between Picture Sources
You can connect the projector to multiple video sources and use 
the buttons on the projector or remote control to switch 
between them:
❏Press the 
Source button on the projector to move through 
all the video source options. 
❏On the remote control, press the 
Input A/B button to 
select a computer or component video source. Press the 
S-Video/Video button to select a composite or S-video...

EPSON PowerLite Home 10 Projector
7/03 EPSON PowerLite Home 10 Projector - 7 ❏If you’re using Windows,
® hold down the Fn key and press 
the function key that lets you display on an external 
monitor. It may have an icon such as  , or it may be 
labelled 
CRT/LCD. (Allow a few seconds for the projector to 
sync up after pressing it.) 
The remote control doesn’t work
❏Make sure you’ve removed the battery insulating tape. See 
the Quick Setup sheet for instructions.
❏Make sure you’re within 20 feet of the...

EPSON PowerLite Home 10 Projector
8 - EPSON PowerLite Home 10 Projector 7/03 4. Click 
Mirror Displays in the lower corner of the screen. 
One of the monitor icons automatically moves on top of 
the other.
If you’re using Mac OS 9.x or earlier:
1. From the Apple menu, select Control Panels, then click 
Monitors and Sound.
2. Click the 
Arrange icon, and then drag one monitor icon on 
top of the other. 
Note: If the 
Arrange option isn’t available, you may need to select 
one of the Simulscan resolution...

EPSON PowerLite Home 10 Projector
7/03 EPSON PowerLite Home 10 Projector - 9
Changing Menu Settings
You can use the buttons on the projector or remote control to 
display the menus and change settings. 
1. Press the 
Menu button on the projector or remote control. 
You see a screen similar to the one below (the screen you see 
depends on the equipment you’ve connected):
The four menus are shown on the left, and the options 
available to the highlighted menu are shown on the right.
Note: If nothing is...

EPSON PowerLite Home 10 Projector
10 - EPSON PowerLite Home 10 Projector 7/03
Cleaning the Air Filter
If the air filter becomes clogged with dust, it can cause 
overheating and damage the projector. Follow these steps to 
clean the filter:
1. Press the P 
Power button to turn the projector off, and 
wait for the P power light to stop flashing.
2. Unplug the power cord and disconnect any cables.
3. Turn the projector upside-down 
4. Use a small vacuum cleaner designed for computers and 
other office...