Epson Powerlite 835p Multimedia Projector Users Guide

Fine-Tuning the Projector71
Creating Your Own Startup Screen
You can transfer any image from your computer or video source to the 
projector and then use it as your startup screen. You can also use it as 
the screen displayed when the projector is not receiving a signal or 
when you press the 
A/V Mute button. The image can be a company 
logo, slogan, photograph, or any other image you want to use. 
Capturing the Image
Start by displaying the image you want to use from either a computer 
or video source,...

72Fine-Tuning the Projector7. When the message 
Save image as user’s logo? appears, select 
Yes and press Enter. Saving the logo may take a few moments. 
Do not use your projector or video source while the logo is being 
saved.
8. When you see the message 
Completed, press Esc to return to the 
menu screen. 
Choosing When to Display the Image 
After your image is saved, it is automatically set as the startup screen. 
You can also save it as the screen you see when there’s no signal or 
when you press the...

Fine-Tuning the Projector73
Controlling Multiple Projectors
If you’re using more than one projector for your presentation, you can 
switch between them using a single remote control. To do this, you 
need to set a different ID for each projector. During the presentation, 
you can change the remote control’s ID to match that of the projector 
you want to use. 
Setting the Projector ID
The projector’s default ID is 1. Follow these steps to change it:
1. Press the 
Menu button on the remote control.
You see...

74Fine-Tuning the Projector
Changing the Remote Control ID
To change the remote control’s ID to match the projector’s ID, follow 
these steps:
1. Press the 
ID button on the remote control. You see it light. 
2. Press one of the numbered buttons on the remote control to select 
the ID of the projector you want to operate. 
The 
ID button’s light shuts off and the new ID is registered.
3. Repeat steps 1 and 2 each time you want to switch projectors.
To check the remote control’s current ID, do the...

Fine-Tuning the Projector75
Customizing Projector Features
You can use the menu system to turn standby mode on or off, adjust 
the network settings, change the language, and customize the way the 
projector displays images.
Remote Monitoring Setup Options
These options let you set up the projector so it can be monitored and 
controlled from a remote computer (see page 80). 
■Standby Mode (in the Extended menu)
Select 
Network ON to enable the projector to be monitored over 
a network when it’s in standby...

76Fine-Tuning the Projector
Enabling Quick Setup Options
Your projector can quickly detect and set up the focus, straighten the 
image, and adjust the colors for the surface the image is being 
projected on. Follow these steps to enable these features: 
1. Press the 
Menu button on the remote control.
You see the projector’s menu screen. 
2. Select the 
Setting menu and press Enter. Then highlight Quick 
Setup 
and press Enter.
3. Select 
Quick Setup Options and press Enter. 
4. Adjust any of these...

Fine-Tuning the Projector77
Automatically Running Quick Setup
To automatically run quick setup whenever you turn on the projector, 
follow these steps: 
1. Press the 
Menu button on the remote control.
You see the projector’s menu screen. 
2. Select the 
Setting menu and press Enter. Then select Quick 
Setup 
and press Enter.
3. Select 
Startup Options and press Enter. 
4. Select 
Quick Setup and press Enter. 
5. Press the 
Menu button to exit. 
Users Guide.book  Page 77  Tuesday, May 25, 2004  11:49 AM 

78Fine-Tuning the Projector
Users Guide.book  Page 78  Tuesday, May 25, 2004  11:49 AM 

79
1
Managing Projectors 
The EasyManagement software for your projector lets you monitor 
and control your projectors from a remote computer:
■Use EMP Monitor (available for Windows only) to see your 
projectors’ status, switch image sources, and control basic settings.
■Use EMP NetworkManager to send out messages by e-mail, 
notifying you when a problem occurs with a projector.
■Use a network management utility running SNMP, such as 
HP OpenView, to manage your facility’s equipment from a 
pre-existing...

80Managing Projectors
Connecting and Configuring the 
Projector on a Wired Network 
Before using the EasyManagement software to manage your 
projector(s), you have to connect each projector you want to monitor 
to your network and configure it with an appropriate IP address. You 
can connect and configure the projector  using the network port.
Follow these steps to connect and configure the projector for your 
network.
1. Connect the projector to your network using a commercially 
available 100baseTX or...