Epson Powerlite 835p Multimedia Projector Users Guide

Solving Problems111
Solving EasyManagement Problems 
You don’t see your projector in the EMP Monitor window.
■Make sure that you’ve connected the projector to the network and 
configured it correctly; see page 80. Also, make sure you’ve 
registered the projector with EMP Monitor; see page 81.
■Make sure that Standby Mode in the projector’s Extended menu 
is set to 
Network ON.
■If the computer you are using is running Windows XP or 2000, 
you must be logged in as the Administrator.
■Try restarting your...

112Solving Problems
Where To Get Help
Epson provides technical assistance through electronic support 
services 24 hours a day, as listed in the following table.
Telephone Support Services
To use the Epson PrivateLine Support service, call (800) 637-7661 
and enter the PIN on the Epson PrivateLine Support card included in 
your Start Here kit. This is the fastest way of speaking to a live 
representative, and it’s free. This service is available 6
AM to 6PM, 
Pacific Time, Monday through Friday, for the...

113
A
Software Installation
The Epson Projector Software CD-ROM includes EMP Monitor 
and EMP Network Manager for presenting and monitoring the 
projector from a remote location. 
Windows System Requirements 
Before you install the software, make sure your computer meets these 
requirements: 
■Microsoft Windows 98, 2000, Me, or XP
■IBM® compatible PC with at least a Pentium® III 700 MHz 
processor 
■At least 256MB of RAM
■At least 128MB of free hard disk space
■SVGA (800 × 600) or better display adapter...

114Software Installation
Installing the Software on a Windows 
System
Follow these steps: 
1. Insert the Epson Projector software CD-ROM in your computer’s 
CD-ROM or DVD drive. You see this screen:
2. Click 
Install, then follow the on-screen instructions to install 
your projector software. 
When you see a message that the Epson GDI Monitor Driver has 
not passed Windows Logo testing, click 
Continue Anyway.
3. When installation is complete, close the installation window. 
Users Guide.book  Page 114...

115
A
Projector Installation
This appendix provides guidelines on installing the projector in a 
permanent location, such as a theater or conference room.
The projector can be installed for four different viewing setups: front 
projection, ceiling mounting, rear projection onto a semi-transparent 
screen, or rear/ceiling projection, as shown: 
To project from overhead, you’ll need the optional ceiling mounting 
hardware; see page 13 for ordering information. You’ll also need to 
select 
Front/Ceiling or...

116Projector InstallationYou can correct the distortion using the 
Keystone function in the 
projector’s menu system (see page 65) or the keystone buttons on the 
projector’s control panel.
If you place the projector so that the base of the lens is level with the 
bottom of the screen, the image should be square and you won’t have 
to adjust it. If you place the lens lower than the bottom of the screen, 
you’ll have to tilt the projector upward if you want to fill the whole 
screen with the image. 
Users...

117
A
Technical Specifications
General
Type of display Poly-silicon TFT active matrix
Size of LCD panels Diagonal: 0.8 inches (20.3 mm) 
Resolution
(native format) 1024 × 768 pixels (XGA)
Color reproduction 24 bit, 16.8 million colors
Brightness 3000 lumens (High Brightness mode)
2200 lumens (Low Brightness mode)
Contrast ratio 600:1
Image size 30 to 300 inches
Projection distance 2.8 to 48.3 feet (0.9 to 14.7 meters)
Projection methods Front, rear, upside-down (ceiling mount)
Internal sound system 5 W...

118Technical Specifications
Projection Lamp
Type UHE (Ultra High Efficiency)
Power consumption 200 W
Lamp life Approx. 2000 hours (High Brightness 
mode)
Approx. 3000 hours (Low Brightness mode)
Part number V13H010L31
Remote Control
Range 33 feet (10 meters)
Batteries (2) Alkaline AA
Dimensions
Height 4.5 inches (114 mm), feet retracted
Width 14.4 inches (365 mm)
Depth 11.0 inches (280 mm)
Weight 10.4 lb (4.7 kg)
Electrical
Rated frequency 50/60 Hz AC
Power supply 100 to 120 VAC, 3.6 A
200 to 240 VAC,...

Technical Specifications119
Safety
United States FCC 47CFR Part 15B Class B (DoC)
UL60950 Third Edition
Canada ICES-003 Class B
CSA C22.2 No. 60950 (cUL)
CE Marking Directive 73/23/EEC
Directive 89/336/EEC
IEC 60950 Third Edition
EN 55022, EN 55024
 Pixelworks
™ DNX™ ICs are used in this projector.
Compatible Video Formats
The projector supports NTSC, PAL, and SECAM international video 
standards, as well as the monitor display formats listed below.
To project images output from a computer, the...

120Technical Specifications
*The image is resized using Epson’s SizeWise™ Technology. 
XGA—60
XGA—70
XGA—75
XGA—85
XGA—100
XGA—12060
70
75
85
100
1201024 × 768
1024 
× 768
1024 
× 768
1024 
× 768
1024 
× 768
1024 
× 768
SXGA1—70
SXGA1—75
SXGA1—85
SXGA1—10070
75
85
1001152 
× 864*
1152 × 864*
1152 × 864*
1152 × 864*
SXGA2—60
SXGA2—75
SXGA2—8560
75
851280 × 960*
1280 × 960*
1280 × 960*
SXGA3—60
SXGA3—75
SXGA3—8560
75
851280 × 1024*
1280 × 1024*
1280 × 1024*
UXGA—60
UXGA—65
UXGA—70
UXGA—75
UXGA—80...