Epson Powerlite 7000 Users Guide

4  •  
Using the ELP Link II Software
 n  n  n  n  n  n             76
Sound Tab Option Tab Option
Description
Volume
Adjusts sound volume. 
Tone
Adjusts sound tone.
Spatializer
Select one of the following sound qualities for three dimensional-like sound:Normal 
Stereo sound is expanded.
Wide  
Stereo sound is further expanded to sound more three-dimensional.
Off
Stereo sound is not expanded.
Reset
Click 
Reset
 to reset all fields to their default values.
Option
Description
Blank To
Specify if a blank...

Using the Software
n  n  n  n  n  n  n  n 77
Custom Tab
 
View Change
Specify how the screen should disappear when changing the image source:Diagonally  
Images disappear and appear from the top left of the screen to the bottom right.
Left to Right  
Images disappear and appear from the left to the right.
Fade In  
Images appear from the center of the screen and disappear to the center.
Lamp Life
Displays the number of hours the lamp has been used.
Pattern Display
Displays the test pattern currently...

4  •  
Using the ELP Link II Software
 n  n  n  n  n  n             78
Changing the Test Pattern  
1.
Click 
Test Pattern
 on the Projector Set dialog box. The following 
window appears:
2.
You can display a test pattern when setting up the projector to verify that the projector is working properly. Choose one of the following: Color Image
Displays a color bar test pattern.
Gray Scale
Displays a gray scale test pattern.
Focus Pattern
 Displays a character-based focus pattern.
Reset
Click 
Reset
 to reset...

Using the Software
n  n  n  n  n  n  n  n 79
User File(bmp)
Displays a bitmapped test pattern from the file name specified. Either type the name or click Ref...
 (refer) to browse the hard disk for the file. 
The bitmap should be 1024 x 768 pixels (dots).
3.
Click 
Pattern
 Display 
to display the test pattern selected. Then 
click 
Close
.
pro-ch4.fm  Page 79  Tuesday, May 13, 1997  2:22 PM 

4  •  
Using the ELP Link II Software
 n  n  n  n  n  n             80
Setting the Image Color Property 
1.
Click 
Color Property
 on the Projector Set dialog box. The Color 
Property window appears.
2.
Specify a color temperature: H 
High (more blue)
M
 
Medium (normal white)
L 
Low (more red)  
User 
Create a custom color temperature by using the slide bars to specify the amount of red and blue.
3.
Specify an image gamma: Gamma 1
 Provides a dynamic and contrastive image.
Gamma 2
 Provides an image...

n  n  n  n  n  n  n  n 81
  n     
n       
 n     
n     n    
n     
n     n
   
 n   
 n     
n     
n      
n      
n  
5Maintenance 
 
T
he PowerLite 7000 projector needs little maintenance. You should 
keep the lens clean because any dirt or smears appear on the screen. 
You also need to periodically clean the air filter at the bottom of the 
projector. A clogged air filter can block ventilation needed to cool the 
projector and keep it from overheating. 
The only parts you should replace are the...

5  •  
Maintenance
 n  n  n  n  n  n             82
can injure you severely. Do not try to service this product yourself, except as specifically explained in this Owner’s Manual. Refer all other servicing to qualified service personnel.
Cleaning the Lens 
Clean the lens whenever you notice dirt or dust on the surface. Lightly wipe the lens surface with a soft, dry, lint-free cloth. To remove dirt or smears on the lens, moisten a soft cloth with an alcohol-based cleaner and gently wipe the lens surface....

Cleaning the Air Filter
n  n  n  n  n  n  n  n 83
Cleaning the Air Filter 
 
Clean the air filter at the bottom of the projector after every 100 hours of use. If it is not cleaned periodically, it can become clogged with dust, preventing proper ventilation. This can cause overheating and damage the projector. To clean the air filter, follow these steps:1.
Turn off the projector and unplug the power cable.
2.
Turn the projector on its right side so that the handle is on top and you can access the filter...

5  •  
Maintenance
 n  n  n  n  n  n             84
4.
The filter is attached to the inside of the filter cover. It is recommended that you use a small vacuum cleaner designed for computers and other office equipment to clean the filter. If you don’t have one, use a dry, lint-free cloth.  If the dirt is difficult to remove or if the filter is torn, replace it. Contact your PowerLite 7000 dealer or call EPSON Accessories at (800) 873-7766 in the United States and Canada to obtain a new one. Request part...

Replacing the Lamp
n  n  n  n  n  n  n  n 85
3.
Use a screwdriver, coin, or similar object to loosen the two retaining screws on the lamp cover. When the screws are loose, lift off the lamp cover. (You cannot remove these screws.
)
4.
Use a screwdriver, coin, or similar object to loosen the two screws holding the lamp in position. (You cannot remove these screws.) 
pro-ch5.fm  Page 85  Tuesday, May 13, 1997  2:23 PM