Epson Powerlite 6110i Multimedia Projector Users Guide

Welcome11
Using Your Documentation
Your documentation includes a Quick Setup sheet, warranty 
brochures, and an Epson
® PrivateLine® Support card.
The Quick Setup sheet gives instructions for setting up and connecting 
your projector to a notebook computer.
This book contains all the information you need to set up and use 
your projector. Please follow these guidelines as you read through it:
■Warnings must be followed carefully to avoid bodily injury.
■Cautions must be observed to avoid damage to your...

12Welcome
Registration and Warranty
Your projector comes with a basic carry-in warranty. For details, see 
the warranty brochure included with your projector.
In addition, for customers who register their projector, Epson offers 
free Extra Care
SM Road Service. In the unlikely event of an equipment 
failure, you won’t have to wait for your unit to be repaired. Instead, 
Epson will ship you a replacement unit anywhere in the United States 
or Canada, usually via overnight delivery. See the Extra Care...

Welcome13
Unpacking the Projector
After unpacking the projector, make sure you have all the parts 
shown below: 
Save all packaging in case you need to ship the projector. Always use 
the original packaging (or the equivalent) when you need to send the 
projector to another location. If you are moving the projector by 
hand, use a carrying case. See page 91 for transportation instructions.
Additional Components
Depending on how you plan to use the projector, you may need 
additional components: 
■To...

14Welcome
Optional Accessories 
To enhance your use of the projector, Epson provides the following 
optional accessories: 
You can purchase these accessories from an Epson authorized reseller. 
To find the nearest reseller, call 800-GO-EPSON (800-463-7766). 
Or you can purchase online at www.epsonstore.com (U.S. sales) or 
www.epson.ca (Canadian sales). 
Product Part number
Replacement lamp V13H010L45
High efficient air filter (standard)
Smoke filterV13H134A11
V13H134A12
Ceiling mount
Suspension adapter...

15
1
Setting Up the Projector
This chapter gives you basic information on setting up the projector: 
where to position it and how to connect it to a video source (such as a 
VCR or DVD player) or to a notebook or desktop computer. 
Follow the instructions in this chapter on:
■Positioning the projector
■Connecting to video equipment
■Connecting to a computer
■Connecting an external monitor
■Playing sound through the projector 

16Setting Up the Projector
Positioning the Projector
If you’re setting up the projector yourself and it isn’t already installed 
in the classroom or conference room you’re using, you’ll probably 
want to place it on a table in front of the screen, as shown on 
page 17.low
This lets you stand in the front of the room, face the audience, and 
remain close enough to the equipment to be able to control it. Try to 
leave as much space as possible between the projector and the screen to 
get a good-size image....

Setting Up the Projector17
Ideally, you should place the projector directly in front of the center of 
the screen, facing it toward the screen squarely. The lens should be at 
about the level of the bottom of the screen. 
If you place the projector below screen level, you’ll have to tilt it up by 
extending its feet. This causes the image to become “keystone” shaped, 
but you can correct the distortion by pressing the   or   buttons 
on the projector. See page 37 for detailed information about...

18Setting Up the Projector
Connecting to Video Equipment 
You can connect up to four video sources to the projector at the same 
time. Before starting, look at your video equipment to determine its 
available video-output connections: 
■If your video player has a yellow RCA-style video output 
connector, see “Connecting a Composite Video Source” on 
page 19.
■If your video player has an S-Video connector, see “Connecting 
an S-Video Source” on page 20.
■If your video player has a component video port...

Setting Up the Projector19
Connecting a Composite Video Source
1. Locate an RCA-style composite video cable (one may be included 
with your video equipment). 
2. Connect the cable to the yellow video output connector on your 
player and the yellow 
Video connector on the projector:
3. If you want to play sound through the projector, see page 27 for 
instructions on connecting an audio cable.
4. If you don’t need to make any other connections, see Chapter 2 
or the Quick Setup sheet for instructions on...

20Setting Up the Projector
Connecting an S-Video Source
1. Locate an S-Video cable (one may have been provided with your 
video equipment, or you can purchase one from Epson; see 
page 14). 
2. Connect the cable between the S-Video connector on your player 
and the 
S-Video connector on the projector:
3. If you want to play sound through the projector, see page 27 for 
instructions on connecting an audio cable.
4. If you don’t need to make any other connections, see Chapter 2 
or the Quick Setup sheet...