Epson Powerlite 6100i Multimedia Projector Users Guide

3
41
3
Using the Remote Control
The remote control lets you access your projector’s features from 
anywhere in the room—up to 33 feet away. For example, you can turn 
the projector on and off, preview and switch between picture sources, 
turn off picture and sound, freeze the presentation, zoom in on a 
portion of your image, and access the menu system. (The projector 
menus let you adjust many projector settings; see Chapter 4).
This chapter covers:
■Using the remote control
■Controlling the picture and...

42Using the Remote Control
Using the Remote Control
Before using the remote, make sure batteries are installed as described 
on page 43. Then, refer to the tips below:
■Point the remote control either at the front or back of the 
projector, or at the screen.
■Stand within about 30 feet of the projector.
■Avoid using the remote under bright fluorescent lamps or in 
direct sunlight, or the projector may not respond properly.
Using the Navigation Buttons
The remote control has various buttons that let you...

Using the Remote Control43
Replacing the Batteries 
The remote control uses two AAA alkaline batteries. Follow these 
steps when you need to replace them:
1. Press in the tab to remove the battery cover.
2. Remove the old batteries, then insert the new ones as shown.
3. Replace the battery cover. (It should click into place.)
caution
When replacing batteries, 
take the following 
precautions:
■Replace the batteries as 
soon as they run out. If the 
batteries leak, wipe away 
battery fluid with a soft...

44Using the Remote Control
Controlling the Picture and Sound
You can use the remote control to select your picture sources, 
temporarily turn off the picture and sound, freeze the action, zoom in 
on the picture, and adjust the volume. 
Switching Between Picture Sources
If your projector is connected to more than one computer and/or 
video source, you can switch between the different sources: 
■On the projector’s control panel, there is a Source Search 
button. Press the button to switch between...

Using the Remote Control45
Stopping Action
You can use the remote control to stop the action in your video or 
computer image. 
■Press the Freeze button to stop the action and keep the current 
image on the screen. The sound continues. 
■Press the Freeze button again to restart it.
Zooming Your Image 
You can zoom in on a portion of the image using the E-Zoom buttons 
on the remote control.
1. Press the 
E-Zoom  button on the remote control. 
You see a cross-hair indicating the center of the zoom-in...

46Using the Remote Control
Highlighting Your Presentation
You can display a pointer to call out something on the screen or 
emphasize particular points. There are three pointer shapes you can 
choose from.
Using the Pointer Tool
1. To activate the pointer tool, press the Pointer button on the 
remote control. A pointer appears on the screen.
If you prefer to use a different pointer, see page 47 for instructions 
on changing the pointer shape.
2. Use the  pointer button on the remote control to position...

Using the Remote Control47
Changing the Pointer Shape
Follow the steps below to change the pointer shape.
1. Press the 
Menu button on the remote control, highlight the 
Settings menu, and press Enter. 
You see this screen:
2. Highlight 
Pointer Shape and press Enter.
3. Select the pointer you would like to use, then press 
Enter to 
select it.
4. When you have finished selecting a pointer shape, press the 
Menu 
button to exit the menu system.  

48Using the Remote Control 

4
49
4
Configuring the Projector 
You can use the projector’s on-screen menus to adjust the image, 
sound, and other features. This chapter covers the following 
information: 
■Using the menu system
■Adjusting color and clarity
■Adjusting the input signal
■Customizing projector features
■Selecting projector setup options
■Selecting network settings
■Viewing lamp usage and other information
■Using the projector’s security features 

50Configuring the Projector
Using the Menu System
You can use the remote control (or the projector’s control panel) to 
access the menus and change settings. Follow these steps:
1. To display the menu screen, press the 
Menu button. 
You see a menu screen similar to the one shown below (the 
settings may differ from those shown here, depending on the 
selected input source):
The menus are listed on the left, and the options available for the 
highlighted menu are shown on the right.
2. Use the  pointer...