Epson Powerlite 6100i Multimedia Projector Users Guide

A
111
A
Appendix A: Projector 
Installation
This appendix provides guidelines on installing the projector in a 
permanent location, such as a theater or conference room.
Installation Guidelines
The projector can be installed for four different viewing setups: front 
projection, ceiling mounting, rear projection onto a semi-transparent 
screen, or rear/ceiling projection, as shown: 
Front projection Rear projection
Rear/ceiling projection
Front/ceiling projection 

112Appendix A: Projector InstallationTo project from overhead, you’ll need the optional ceiling mounting 
hardware; see page 12 for ordering information. You’ll also need to 
select 
Front/Ceiling or Rear/Ceiling in the projector’s Extended 
menu to flip the image upside-down. To project from the rear, select 
Rear (see page 59).
If you’re mounting the projector on the ceiling and you place it above 
screen level, you’ll have to tilt it down to position the image on-screen. 
This causes the image to lose...

Appendix A: Projector Installation113
Installing the Rear Cable Cover and 
Lock
If you’re mounting the projector on the ceiling, you can install the 
rear cable cover to enhance the cosmetic appearance of the system.
To install the cover, insert the cover’s tabs into the slots as shown, 
then attach it with the two included screws.
For security purposes, you can also install a lock to ensure that the 
cable cover is not removed. 

114Appendix A: Projector Installation 

B
115
B
Appendix B: Technical 
Specifications
General
Type of display Poly-silicon TFT active matrix
Size of LCD panels Diagonal: 0.8 inch
Resolution
(native format) 1024 × 768 pixels (XGA)
Color reproduction 24 bit, 16.7 million colors
Brightness 3500 lumens (high brightness mode)
2700 lumens (low brightness mode)
Contrast ratio 500:1
Image size 30 to 300 inches
Projection distance 2.5 to 36.5 feet (0.8 to 11 meters)
Projection methods Front, rear, upside-down (ceiling mount)
Internal sound system 5 W...

116Appendix B: Technical Specifications
Projection Lamp
Type UHE (Ultra High Efficiency)
Power consumption 230 W
Lamp life Up to 2500 hours (high brightness mode)
Up to 3000 hours (low brightness mode)
Part number V13H010L37
Remote Control
Range 33 feet (10 meters)
Batteries (2) Alkaline size AAA 
Dimensions
Height 5.75 inches (146 mm) [not including feet]
Width 18.3 inches (465 mm)
Depth 13.39 inches (340 mm)
Weight 15.4 lb (7 kg)
Electrical
Rated frequency 50/60 Hz AC
Power supply 100 to 120 VAC, 3.7...

Appendix B: Technical Specifications117
Environmental
Temperature Operating: 32 to 104 °F (0 to 40 °C)
Storage: 14 to 140 °F (–10 to 60 °C)
Humidity Operating: 20 to 80% RH,
non-condensing
Storage: 10 to 90% RH,
non-condensing
Operating altitude 0 to 9,843 ft (0 to 3,000 m)
Safety
United States FCC Part 15B Class B (DoC)
UL60950-1
Canada ICES-003 Class B
CSA C22.2 No. 60950-1
CE Marking Directive 73/23/EEC
Directive 89/336/EEC
EN 55022, EN 55024
Pixelworks
™ DNX™ ICs are used in this 
projector. 

118Appendix B: Technical Specifications
Compatible Video Formats
The projector supports NTSC, PAL, and SECAM international video 
standards, as well as the monitor display formats listed below.
To project images output from a computer, the computer’s video card 
must be set at a refresh rate (vertical frequency) that’s compatible with 
the projector; see the following table for compatible formats. As 
noted  below, some images are automatically resized to display in 
the projector’s “native” format...

Appendix B: Technical Specifications119
*The image is resized using Epson’s SizeWise™ Technology. 
MAC13
MAC16
MAC19
MAC2167
75
75
75640 × 480*
832 × 624*
1024 × 768
1152 
× 870*
NTSC 
NTSC 4:43
PAL
N-PAL
M-PAL
PAL—60
SECAM60
60
50
50
60
60
50—
—
—
—
—
—
—
SDTV (525i)
SDTV (525p)
SDTV (625i)
SDTV (625p)
HDTV (750p)
HDTV (1125i)60
60
50
50
50/60
50/60720 
× 480*
720 × 480*
720 × 576*
720 × 576*
1280 × 720*
1920 × 1080*
Mode Refresh Rate (Hz) Resolution 

120Appendix B: Technical Specifications