Epson P4000 Manual

Getting Started21
2
2
2
2
2
2
2
2
2
2
English3. After you finish making the setting, select a 
different item by pressing the UP or Down button 
on the control panel.
4. Repeat steps 2 and 3 until you finish making the 
date and time settings.
5. After you finish making all settings, press the OK 
button.
Note:
❏If you remove the battery from P-4000, the date and 
time settings will be erased after approximately one day 
at the most.
❏If the date and time settings are erased, the Date and 
time settings...

22Getting Started
Holding the button operations
You can make the buttons of P-4000 ineffective 
temporarily by sliding the power switch to Hold as 
shown below.
Note:
❏To deactivate hold, slide the power switch back to the 
middle.
❏Putting the button operations on hold is a useful 
function when you put P-4000 in your bag while 
listening to audio with the headphones.
How to use the Home screen
When turning P-4000 on, the Home screen appears 
first. All the operations can be started from this screen....

Getting Started23
2
2
2
2
2
2
2
2
2
2
English
You can also use the pop up menu by pressing the 
Menu button. For details, see “Using the Pop Up 
Menu” on page 49.
About the stand
You can use the stand when you view images and play 
movies. Set P-4000 to the stand as shown below. Saved DataSelect to display folders that 
include data saved in P-4000 
from memory cards.
Latest DataSelect to display the latest 
data saved in P-4000 from a 
memory card.
AlbumsSelect to display albums. See 
“Using the Albums”...

24Using Memory Cards
Chapter 3
Using Memory Cards
Setting and Removing a Memory Card
P-4000 provides you with the CF Card slot and SD 
Card slot.
This section describes how to set memory cards and 
copy data from them. 
c
Caution:
❏To use a memory card correctly, read manuals 
provided with the memory card. 
❏Never remove a memory card while the Access 
lamp flashes. Doing so may cause data in the 
card or HDD to be lost or damaged.
❏Do not put stickers on memory cards. The sticker 
may peel off,...

Using Memory Cards25
3
3
3
3
3
3
3
3
3
3
EnglishSetting a memory card into the CF Card slot
You can set a CF card or other card with the CF adapter 
in the CF Card slot.
Insert the memory card into the memory card slot with 
the back side up to the LCD side. Then push the 
memory card fully into the slot.
Note:
Insert memory cards in the correct direction. Otherwise, the 
memory card and P-4000 may be damaged.
Removing a memory card from the CF Card 
slot
1. Make sure that the Access lamp is off.
c...

26Using Memory Cards
Note:
When using the memory card set in the CF adapter, do 
not remove only the memory card. Remove the CF 
adapter from the P-4000.
Setting a memory card into the SD Card slot
You can set an SD memory card or MultiMedia card 
in the SD Card slot.
Insert the memory card into the memory card slot with 
the back side up to the LCD side. Then push the 
memory card fully into the slot.Note:
Insert memory cards in the correct direction. Otherwise, the 
memory card and P-4000 may be...

Using Memory Cards27
3
3
3
3
3
3
3
3
3
3
English3. The memory card is pushed out. Pull out the 
memory card.
Copying Data from a Memory Card to 
P-4000
Note:
When the battery is low, copying may not be completed. Use 
the AC adapter if this happens.
1. Set the memory card.
2. Select Memory Card in the Home screen and 
press the OK button.
3. If necessary, select the memory card from which 
you wish to copy the data.4. In the Memory Card operation screen, select 
Copy Data from Memory Card by using the Up...

28Using Memory Cards
❏The confirmation dialog box below appears if the 
Delete Data After Copying setting in Copy Mode 
settings is set to Confirm. For details, see 
“Changing the P-4000 Settings” on page 60.
5. Copying starts and the following dialog box 
appears.The data you selected are copied in a folder that is 
automatically made in P-4000. The folder is named 
according to the date, for example “20030325.XXX.” 
XXX is the number assigned according to the copying 
order.
Note:
You can also copy...

Viewing and Playing Data29
4
4
4
4
4
4
4
4
4
4
EnglishChapter 4
Viewing and Playing Data
Viewing Images
This section describes how to view images in the 
P-4000’s HDD or the memory cards. When you would 
like to manage the data while connected to your 
computer, see “Using P-4000 With a Computer” on 
page 56.
Available types of image data
P-4000 supports images in the following format.
* The progressive JPEG format is not supported.
** P-4000 supports images in RAW format that you have taken with 
a...

30Viewing and Playing Data
How to see the screen
When you use the P-4000, you will find many icons on 
the screen. The illustration below shows what those 
icons indicate.
* P.I.F. icons are displayed only in Saved Data.
** You can set whether unsupported files are displayed or not. The 
factory setting is Hide. See “Changing the P-4000 Settings” on 
page 60 for details.
Albums
PC_DATA Scenery Flower Travel
Album1 Travel2 New Album3
Photo Favorite Album4
a
d
c
b
DSC00008.erf
Albums / XXXXX
DSC00001...