Epson P 4000 Manual

Managing Files 41
Settings Available in the Slide Show Pop-Up 
MenuCopying Files to and From Your 
ComputerYou can connect the P-4000 to your computer using the 
USB cable that came in the box. Your computer recognizes 
the P-4000 as an external hard disk drive, and you can easily 
copy files back and forth.
You should use the AC adapter when you connect the 
P-4000 to your computer.Note: 
If your computer uses Windows
® 98SE, you need to install 
driver software before you connect the P-4000. See the...

Managing Files 42
The   PC peripheral mode icon is displayed briefly, 
then the LCD turns off. You can turn it on by pressing 
any button.
3Select the 
EPSON_PV 
drive on your computer. In 
Windows, you may have to use My Computer to select 
the drive.
From your computer, you will see an Albums folder and 
a Cards folder (corresponding to Saved Data on the 
Home screen). Do not change the names of these 
folders or any of their subfolders.
To locate files in the Cards folder, you will need to open 
a...

Managing Files 43
Disconnecting the P-4000 From Your 
Macintosh1Drag and drop the P-4000 icon to the trash.
2Turn off the P-4000 and remove the USB cable from 
your Macintosh.
3Remove the USB cable from the P-4000. 

Direct Printing 44
Chapter 5Direct PrintingYou can print your photos directly on any of the following 
Epson printers without connecting a computer:❍
Epson Stylus
® Photo R300 and R300M
❍
Epson Stylus Photo R320
❍
Epson Stylus Photo RX600
❍
Epson Stylus Photo RX620
❍
Epson Stylus Photo RX700
❍
PictureMate
®
❍
PictureMate Deluxe Viewer Edition
More printers may be supported; check the Epson web site 
to get the latest information: 
http://support.epson.com
.
You can use the following sizes and types of...

Direct Printing 45
3Connect the small end of the USB cable to the P-4000.
4Connect the other end of the cable to the 
EXT I/F 
connector on the printer.
The 
EXT I/F 
connector may be in a different location 
on your printer.
5Connect the AC adapter to the P-4000.
6Turn on the printer and the P-4000. 
Note: 
Don’t worry if you see the message Camera is connected 
on the printer’s LCD panel. You will still be able to print from 
the P-4000.
Printing Your Photos1Make sure the printer is connected and has...

Direct Printing 46
4Do one of the following:
❍
To print only the selected image, choose 
Print This 
Photo
. 
❍
To print all the images in the selected folder or 
album, select 
Print All Photos
.
❍
To add images to be printed and select the number 
of copies, choose 
Select Photos to Print
. You see 
this screen:
Select the images you want to print and the number of 
copies for each one.5Press the 
OK
 button. You see the Print Settings menu:
6Use the 4-way ring to choose the settings you want:
Select...

Direct Printing 47
7Press the 
OK
 button when you are ready to start 
printing.
During printing, the LCD is turned off. When you are 
finished printing, make sure you disconnect the USB cable.
Creating Print Orders A print order identifies images that you want to print, and 
the number of copies of each image. You can create or 
modify print orders at any time while using the P-4000. 
Then you can print your images whenever it is convenient.Note: 
Print orders are saved even after turning turn off the...

Customizing Settings 48
Chapter 6Customizing SettingsYou can easily change the P-4000’s settings to make it work 
best for you. Select 
Settings
 on the Home screen and press 
the 
OK
 button. You see this menu:
Each of these options is described in this chapter. Select the 
one you want to change and press the 
OK
 button. 
Adjusting the LCD Brightness1Select 
LCD Brightness
 and press the 
OK 
button.
2Press left or right on the 4-way ring to select the 
brightness level you prefer. Then press the OK...

Customizing Settings 49
Setting the Slide Show OptionsYou can select transition effects, background music, and 
timing for your slide shows.
1Select 
Slide Show
 and press the 
OK
 button.
2Press left or right on the 4-way ring to choose from the 
following 5 transition effects:
❍
Film
❍
Shutter
❍
Fade
❍
Curtain
❍
Blend
A sample of each effect plays briefly on the screen. The 
effect you choose will be applied to all your slide shows.
3Press down on the 4-way ring to move to the 
background music...

Customizing Settings 50
Changing the Copy Mode SettingThis option lets you tell the P-4000 how to handle images 
on a memory card after copying. 
1Select 
Copy Mode 
and press the 
OK
 button.
2Press left or right on the 4-way ring to choose from the 
following settings:
❍
Select 
Do Not Delete 
if you do not want files on 
memory cards to be deleted after they have been 
copied to the P-4000. 
❍
Select 
Delete 
if you want files on memory cards to 
be automatically deleted, without a warning 
message,...