Epson P 4000 Manual

Getting Started 11
Note: 
The P-4000 stops charging if the battery becomes hot when 
operating it during charging. It will start charging again when it 
cools down.Removing the BatteryIf you plan to store the P-4000 for an extended period of 
time, you should remove the battery.
1Make sure the P-4000 is turned off. 
Caution: 
Remove the AC adapter if it is connected to the P-4000.
Never remove the battery while the P-4000 is turned on. 
Doing so may cause files to be lost or damaged.
2Open the battery...

Getting Started 12
Using the Viewing StandAssemble the viewing stand and place your P-4000 on the 
stand as shown.
This is especially convenient for watching videos and slide 
shows.
Turning On the PowerTo turn on the power, slide the power switch down as 
shown below, then release it. The blue activity light flashes.Setting the Language, Date, and TimeWhen you turn on the P-4000 the first time, you see the 
Language setting screen:Activity 
light
Italiano Francais
Espanol
Language setting
English...

Getting Started 13
Note: 
If you see the Home screen instead, the language has already 
been selected. To change it or check the date and time, select 
Settings on the Home screen. Then follow the instructions in 
“Setting the Date and Time” on page 51 or “Choosing the 
Language” on page 52.1Press the 
OK
 button to select 
English
. You see a message 
about setting the date. 
2Press the 
OK 
button. You see the Date and time settings 
screen:
3Press right or left on the 4-way ring to change the value...

Getting Started 14
Using the Home ScreenWhenever you turn on the P-4000, the Home screen 
appears. All operations can be started from this screen. 
You can return to the Home screen at any time by pressing 
the 
Home
 button.The following table summarizes the Home Screen 
functions.Home
Latest Data SettingsAlbums Memory Card Saved Data
Battery icon
Album 
shortcuts
Battery iconIndicates the charge remaining in the 
battery. See “Charging the Battery” on 
page 10 for details.
Saved DataLets you select...

Getting Started 15
Tu r n i n g  O f f  t h e  P o w e rBefore you turn off the P-4000, make sure the 
Access
 light 
is off. Then slide the power switch as shown below, and 
hold it down for a few seconds until the 
Access
 light flashes 
and the P-4000 turns off.
Access light 

Using Memory Cards 16
Chapter 2Using Memory CardsThe P-4000 has two memory card slots: one for 
CompactFlash cards and one for Secure Digital cards.
This chapter explains how to insert and remove memory 
cards and how to display and copy files.Inserting and Removing Memory 
CardsThe P-4000 supports the following types of memory cards:❍
CompactFlash Type I and Type II 
❍
Microdrive
™ (3.3 V only)
❍
SD (Secure Digital)
❍
MultiMedia card (MMC V 2.1 or later), up to 512MBIf you have a CompactFlash adapter,...

Using Memory Cards 17
Using the CompactFlash Card SlotYou can use Type I and Type II CompactFlash cards or 
Microdrive cards in the 
C/F Card
 slot. If you have a 
CompactFlash adapter, you can also use other types of cards, 
as described in “Inserting and Removing Memory Cards” 
on page 16.
Insert the memory card into the slot with the back of the 
card facing the LCD. Then push the memory card all the 
way into the slot.
If you are using a CompactFlash adapter, put the card into 
the adapter and insert...

Using Memory Cards 18
Using the Secure Digital Card SlotYou can use Secure Digital or MultiMedia cards in the 
SD 
Card
 slot.
Insert the memory card into the slot with the back of the 
card facing the LCD. Then push the memory card all the 
way into the slot.
Caution: 
Make sure you insert memory cards in the correct orientation. 
Otherwise, the card and P-4000 may be damaged.
To remove a card from the 
SD Card
 slot, first make sure the 
Access
 light is off. Then press in on the top of the card. 
When...

Using Memory Cards 19
Copying Files from a Memory CardAfter you insert a memory card, you can browse the files and 
decide what you want to do with them, or simply copy all 
the files on the card to the P-4000.Note: 
When the battery is low, copying may not be completed. Use 
the AC adapter if this happens.Supported Image Formats * Pixels refer to image resolution, not file size (bytes). The pixel size depends on 
the capability and settings of the camera used to capture the image, and whether 
you have...

Using Memory Cards 20
Copying Your Files1Insert the memory card as described in “Using the 
CompactFlash Card Slot” on page 17 or “Using the 
Secure Digital Card Slot” on page 18.
2Select 
Memory Card
 in the Home screen and press the 
OK
 button.
3If necessary, select the memory card you want to access. 
You see the following menu:
4Select what you want to do by pressing up or down on 
the 4-way ring. Then press the 
OK
 button.
❍
If you select 
Copy Data from Memory Card
, 
copying starts and the...