Epson Home Projector TW5350 Users Guide

							Useful Functions
50
Playing Back Image Data (Slideshow)
Compatible Data
The following types of files stored on USB storage devices such as USB memories and digital cameras that
are connected to the projector's USB port can be displayed as a slideshow.
Slideshow compatible file types
File Type (Extension) Notes
.jpg•Images using CMYK color mode are not compatible.
•Progressive format images are not compatible.
•Images with a resolution greater than 8192 x 8192 are not compatible.
•Due to the characteristics of JPEG files, images may not be projected clearly if the
compression ratio is too high.
Playing a Slideshow
a
Connect a USB storage device.
Files are displayed as thumbnails.
To open a folder, select the folder, and then press the  button.
c
If thumbnails of the files are not displayed, press the  button on the remote control to
change the source.
b
Select Slideshow.
Use the  buttons to select Slideshow at the bottom right of the screen, and then
press the 
 button.
Slideshow starts.
c
•To close the slideshow, disconnect the USB storage device.
•Select an image from the thumbnails and press the  button to enlarge the selected image.
Press the 
 buttons on the remote control when viewing an enlarged image to change between
images. You can also rotate the image using the 
 buttons. 
						

							Useful Functions
51
Settings for Slideshow
You can set the file display order and slideshow operations on the option screen.
a
Use the  buttons to position the cursor over the folder where you want
to change settings, and then press the 
 button.
The submenu is displayed.
b
Select Option, and then press the button.
The option screen is displayed.
c
Position the cursor over the item you want to change, and press the  button to make
settings for each item.
The following table shows the details for each item.
Display OrderYou can select to display the files in Name Order or Date Order.
Sort OrderYou can select to sort the files In Ascending or In Descending order.
Continuous PlayYou can set whether to repeat a slideshow.
Screen Switching
TimeWhen playing a slideshow, you can set the time for a single file to be dis-
played. You can set a time between No (0) to 60 seconds. When you set No,
auto play is disabled.
EffectYou can set the screen effects when changing slides.
d
When you have finished making settings, use the  buttons to position
the cursor over OK, and then press the 
 button.
The settings are applied.
If you do not want to apply the settings, position the cursor on Cancel, and then press the 
 button. 
						

							Useful Functions
52
Projecting Two Images Simultaneously (Split
Screen) (EH-TW5350 Only)
Projecting in Split Screen
You can use the split screen feature to simultaneously project two images from different image sources
(HDMI1/HDMI2 and Screen Mirroring).
Check the following points before you start projecting in Split Screen.
•Connect devices to the projector using Screen Mirroring. s  p.59
•Make sure the source is HDMI1 or HDMI2.
a
Press the  button to display the Settings menu.
b
Select Split Screen, and then press the  button.
Images from the HDMI1 or HDMI2 source are projected on the left of the screen, and images from
Screen Mirroring are projected on the right of the screen.
c
3D images cannot be projected in the split screen projection.
Changing the Split Screen Settings
When you press the  button while performing the split screen projection, you can change the Split
Screen settings.
The following table shows the details for each item.
Screen Right For-
matSelect the orientation and size of the image sent by Screen Mirroring.
Audio SourceSelect the source to output audio. When Screen Left is selected, audio is
output from the HDMI1 or HDMI2 source. When Screen Right is selected,
audio is output from Screen Mirroring.
Exit Split ScreenExits the split screen display.
Exiting Split Screen
To exit the split screen projection, press the  button. 
						

							Using the Projector on a Network (EH-TW5350 Only)
53
Projecting Using Wireless LAN
You can project images from smartphones, tablets, and computers over wireless LAN.
To project over wireless LAN, you need to make wireless network settings for the projector and the connected
device in advance.
You can use one of the following methods to project over wireless LAN.
•EasyMP Network Projection to share your projector over a network and project images from any of the computers
on the network.
Download EasyMP Network Projection from the following Web site.
http://www.epson.com/
•Epson iProjection to connect your projector and mobile device wirelessly using the app available on App Store or
Google play. 
  s  p.56
Selecting Network Settings for the Projector
Before you can project from your wireless network, you need to select network settings for the projector.
a
Press the  button to display menus in the order Network - Wireless LAN Power.
b
Use the  buttons to select On, and then press the  button.
c
Select Network Configuration, and then press the  button. 
						

							Using the Projector on a Network (EH-TW5350 Only)
54
d
Select Basic, and then set the following as necessary.
•Projector Name: Enter a name up to 16 alphanumeric characters long to identify the projector over the
network.
•Remote Password: When operating the projector from a smartphone or a tablet, enter a password up to 8
alphanumeric characters long for accessing the projector.
•Display LAN Info.: Set the display format for the projector's network information.
c
Use the displayed keyboard to enter the name, passwords and keyword. Press the 
 buttons on the remote control to highlight characters, and then press  to
enter them.
e
Select Wireless LAN, and then press the  button.
f
Select the Connection Mode setting.
•Quick: Lets you quickly connect to one smartphone, tablet, or computer. When you select Quick,  g o  t o  s t e p  1 0 .
•Advanced: Lets you connect to multiple smartphones, tablets, or computers over a wireless network access
point. When you select Advanced, go to step 7.
When switching the connection mode, follow the on-screen instructions to save your settings. After
saving the settings, the Network menu is displayed.
g
Select Network Configuration - Wireless LAN - Search Access Point, to select the access
point you want to connect to.
h
If you need to assign the SSID manually, select SSID to enter the SSID. 
						

							Using the Projector on a Network (EH-TW5350 Only)
55
i
Assign an IP address to the projector as necessary.
•If your network assigns addresses automatically, select IP Settings to set the DHCP setting to On.
•If you need to set addresses manually, select IP Settings to set the DHCP setting to Off, and then enter the
projector's IP Address, Subnet Mask, and Gateway Address as necessary.
j
When you have finished selecting settings, select Complete and then follow the on-screen
instructions to save your settings and exit the menus.
k
Press the  button on the remote control. The wireless network settings are complete
when you see the correct IP address on the LAN standby screen.
When you have finished making wireless settings for your projector, you need to make wireless settings on
the connected device. Then start the network software to send images to your projector through a wireless
network.
c
•When using EasyMP Network Projection, select the same connection mode that you selected in step 6.
•To prevent the SSID and IP address from being displayed on the LAN standby screen or the Home
screen, set SSID Display and IP Address Display to Off. 
s Network - Network Configuration -
Wireless LAN
Selecting the Computer's Wireless LAN Settings
Before connecting to the projector, select the correct wireless network on your computer.
Selecting wireless network settings in Windows
a
To access your wireless utility software, double-click the network icon on the Windows
taskbar.
b
When connecting in Advanced connection mode, select the network name (SSID) of the
network the projector is connecting to.
c
Click Connect.
Selecting wireless network settings in OS X
a
Click the AirPort icon on the menu bar at the top of the screen. 
						

							Using the Projector on a Network (EH-TW5350 Only)
56
b
When connecting in Advanced connection mode, make sure AirPort is turned on and select
the network name (SSID) of the network the projector is connecting to.
Setting Up Wireless Network Security
You can set up security for your projector to use on a wireless network. Set up one of the following security
options to match the settings used on your network:
•WPA2 security
•WPA/WPA2 security
a
Press the  button to display menus in the order Network - Network Configuration -
Security.
b
Select the security settings to match your network settings.
c
When you have finished making settings, select Complete and follow the on-screen
instructions to save your settings and exit the menus.
Projecting in Epson iProjection
After selecting the wireless network settings for your projector, you can display a QR code on the screen and
use it to connect a smartphone or tablet using the Epson iProjection app (Ver. 1.3.0 or later).
c
•You can download Epson iProjection free of charge from App Store or Google Play. Any fees incurred
when communicating with the App Store or Google play are the responsibility of the customer.
•When using Epson iProjection in Quick connection mode, we recommend making security settings.
s  p.56
a
Press the  button to display menus in the order Network - Wireless LAN Power.
b
Use the  buttons to select On, and then press the  button.
c
Display the Network Configuration - Basic - Display LAN Info. menu. 
						

							Using the Projector on a Network (EH-TW5350 Only)
57
d
Use the  buttons to select Text & QR Code, and then press the  button.
e
Press the  button on the remote control or select Display the QR Code in the
projector's Network menu to display the QR code.
c
•If you press the  button, you can also display the QR code from the Home screen. s  p.27
•If the projector is already receiving an image signal over the network, the QR code is not
displayed even if you press the 
 button. Select Display the QR Code from the
Network menu to display the QR code.
•To hide the QR code, press the  button.
f
Start Epson iProjection on your smartphone or tablet.
g
Tap  on the application screen.
The menu is displayed.
h
Tap Connect on the menu.
The projector search screen is displayed.
i
Tap Read QR code on the application screen.
Your camera starts and the preview screen is displayed.
c
When the projector you want to connect to is displayed in the list on the projector search
screen, select the projector and tap Connect to connect.
j
Read the projected QR code on your smartphone or tablet.
Read the code from in front of the screen so that the QR code fits into the guide. If you are too far from
the screen, the code may not be read.
When a connection is established, the image from the connected device is displayed. Tap Photos,
Documents, or Web Page on the menu, and select the file you want to project.
Operating using a smartphone (remote control function)
By using Epson iProjection (Ver. 1.4.0 or later), you can operate the projector from a smartphone or tablet.
Tap 
 in Epson iProjection to display the menu.
Tap Remote Control on the menu to display the following screen.  
						

							Using the Projector on a Network (EH-TW5350 Only)
58
c
When Remote Password is set, you need to enter the password. Once the password has been
recognized, you do not need to enter it from the second time.
Button Function
aDisplays the menu. 
bTurns the projector on or off. 
cChanges to the image from each input port. s  p.26
dSets the image quality using the on-screen instructions.
eSaves, loads, erases, or rename a memory. s  p.39
fTurns HDMI Link on or off. s  p.48
gWhen HDMI Link is On, you can perform operations such as Play,
Stop, Fast Forward, Rewind, Next Chapter, Previous Chapter, and
Pause.
hSets the Color Mode, Frame Interpolation, Image Enhance‐
ment, Color Temp., RGBCMY, Power Consumption, and Auto Iris.
iSets the 3D Display, 3D Format, 2D-to-3D Conversion, 3D
Depth, Diagonal Screen Size, and 3D Brightness.
jSets the Aspect, Image Processing, Keystone, Split Screen,
Screen Mirroring, Reset All, Reset Memory, and Test Pattern.
kAdjusts the volume.
lTurns the video and audio on or off. s  p.32
mOpens the touch pad screen.
The touch pad allows you to operate the projector's menu screens
by simply touching your device.
nSelect the projector you want to control when connecting to mul-
tiple projectors. 
						

							Using the Projector on a Network (EH-TW5350 Only)
59
Projecting in Screen Mirroring
You can send images to your projector from mobile devices such as laptops, smartphones, and tablets using
Intel WiDi (Ver. 3.5 or later) and Miracast technology.
If your device supports Intel WiDi or Miracast, you do not need to install any additional software.
Note the following limitations when using Screen Mirroring features.
•Multi-channel audio over 3 channels is played in 2 channels.
•The resolution and frame rate for images with a resolution above 1920 × 1080 and a frame rate above 50 fps are
reduced before being projected.
•You cannot play 3D video.
•You may not be able to view contents with copyright protection with a Miracast connection.
•The audio and connection to Bluetooth audio devices may be lost due to radio wave interference.
•Bluetooth audio devices are not supported in some countries and regions.
•Audio may continue to be output from Screen Mirroring even when projecting images from a source other than
Screen Mirroring.
c
Mobile devices such as Ultrabook, 2-in-1 devices with Intel Core 3rd generation or later processors
installed mainly support Intel WiDi. Mobile devices with Android installed or Windows 8.1 installed
mainly support Miracast. Support for Intel WiDi or Miracast varies depending on the mobile device.
See your mobile device manual for details.
Selecting Screen Mirroring Settings
Select Screen Mirroring Settings on your projector to project images from your mobile device.
a
Press the  button to display menus in the order Network - Screen Mirroring.
b
Use the  buttons to select On, and then press the  button.
c
Select Screen Mirroring Settings, and then press the  button.