Epson Home Projector TW5350 Users Guide

Configuration Menu
70
*Bluetooth audio devices are not supported in some countries and regions.
Extended menu
Function Menu/Settings Explanation
Home Screen
Home Screen Auto
Disp.On, Off Selects whether or not to display the Home
screen automatically when the projector turns
on. The Home screen is not displayed when the
selected source has an image signal when the
projector turns on.
Custom Function 1 Power Consump-
tion, Auto Iris, Key-
stone, InfoSelect the function assigned to the Home screen.
Custom...

Configuration Menu
71
Function Menu/Settings Explanation
Standby Mode
Communication Off, Communication On
Communication On indicates that the projector
can be monitored over a network when the pro-
jector is in standby mode.
Language- Selects the display language.
ResetYes, No
Resets all Extended settings except for Projec‐
tion, High Altitude Mode, Standby Mode, and
Language.
Network menu (EH-TW5350 only)
Function Menu/Settings Explanation
Screen Mirror-
ing
On, Off Enables or disables Screen...

Configuration Menu
72
Notes on operating the Network menu
Basic operations are made in the same way as when using the Configuration menu.
However, be sure to select the Setup complete menu to save your settings when done.
Yes:Saves the settings and exits the Network menu.
No:Exits the Network menu without saving the settings.
Cancel:Continues displaying the Network menu.
Soft Keyboard Operations
In the Network menu, the soft keyboard appears when you need to enter numbers and characters. Use the
 on the...

Configuration Menu
73
Wireless LAN menu
Function Menu/Settings Explanation
Connection Mode
Quick, Advanced Determines how the wireless LAN is connected.
Quick: lets you quickly connect to one smartphone, tablet, or
computer.
Advanced: lets you connect to multiple smartphones, tab-
lets, or computers over a wireless network access point. The
connection is established in infrastructure mode.
Channel1ch, 6ch, 11ch
(This can only be set when Connection Mode is set to Quick.)
Select the frequency bandwidth...

Configuration Menu
74
Reset menu
Function Explanation
Reset network settings.
You can reset all adjustment values for Network to their default settings.
Info menu
Function Menu/Settings Explanation
Projector Info
Lamp Hours Displays the cumulative lamp operating time*.
Source Displays the current input source.
Input Signal Displays the input signal setting of the current input source.
Resolution Displays the resolution.
Scan Mode Displays the scan mode.
Refresh Rate Displays the refresh rate.
3D Format...

Troubleshooting
75
Problem Solving
Reading the Indicators
You can check the status of the projector from the flashing and lit ,  (operation indicators), o, m,
, and  on the control panel.
Refer to the following table to check the projector's status and how to remedy problems shown by the
indicators.
Indicator status during an error/warning
: Lit : Flashing : Status maintained : Off
Indicators Status Remedy
(blue)
(orange)Replace Lamp
It is time to replace your lamp. Replace the lamp with a new lamp...

Troubleshooting
76
Indicators Status Remedy
(blue)
(orange)Internal Error
The projector has malfunctioned.
Remove the power plug from the electrical outlet, and contact
your local dealer or the nearest Epson repair center. 
s Epson
Projector Contact List
(blue)
(orange)Fan Error
Sensor Error
(blue)
(orange)Auto Iris Error
(blue)
(orange)Power Err. (Ballast)
(blue)
(orange)Lamp Error
Lamp Failure
Lamp Cover Open
There is a problem with the lamp, or it failed to turn on.
•Disconnect the power cord, and...

Troubleshooting
77
Indicators Status Remedy
(blue)
(orange)High Temp Error
(Overheating)
The internal temperature is too high.
•The lamp turns off automatically and projection stops. Wait for
about five minutes. When the fan has stopped, disconnect the
power cord.
•If the projector is installed next to a wall, make sure there is at
least 20 cm between the wall and the projector's exhaust vent.
•If the air filter is clogged, clean it. s  p.90
•When using at an altitude of 1500 m or more, set High...

Troubleshooting
78
Indicators Status Explanation
(blue)Ready
Screen Mirroring is available.
(Flashing blue
quickly)Connecting
Connecting to a mobile device.
(Flashing blue
slowly)Error
Screen Mirroring error. Select Off as the Screen Mirroring set-
ting in the projector's Network menu, and select On again.
Starting
Screen Mirroring OffScreen Mirroring is not available. Check that Screen Mirroring
is set to On in the Network menu.
Wireless LAN indicator and status (EH-TW5350 only)
: Flashing: Lit:...

Troubleshooting
79
Problem Page
Problems relating to im-
agesNo images appear.
Projection does not start, the projection area is completely black, or
the projection area is completely blue.p.79
Moving images being projected from a computer are not projected.p.80
"Not supported" is displayed.p.80
"No Signal" is displayed.p.80
Images are fuzzy or out of focus.p.81
Interference or distortion appears in the images.p.81
The image is truncated (large) or small, or only a part of the image is...