Epson Gts50 User Guide

Note:The  settings may vary, depending  on  the  software  version you  are  using.  See the  Help  information in  Document  Capture
Pro  for details.
Select any  other scan settings as  necessary, and click  Send. Your originals  are  scanned  and uploaded to  the  indicated  server.
Note:
You can also  create  a  scan job for uploading scanned  images to  a  SharePoint server or  a  cloud service. You can use the
scan job when you  scan with  Document  Capture Pro  or  when you  scan using the...

Home > Scanning  Special  Projects
Scanning Multi-Page Originals as Separate Files (Windows only)
You can use Document  Capture Pro  to  scan multi -page  originals  as  separate scanned  files. You indicate  where you  want  the  new  scanned
files  to  start  by  inserting a  blank  page  or  barcode between the  pages of your original.
Note:
The  settings may vary, depending  on  the  software  version you  are  using.  See the  Help  information in  Document  Capture
Pro  for details.
Load your...

Select any  displayed  scan settings you  want  to  use.
Note:See the  Help  information in  Document  Capture Pro  for details.
If you  want  to  select  detailed scan settings,  click  Detailed Settings. Select any  scan settings you  want  to  use and click  OK.
Note:
When you  select  this  option,  Epson  Scan  starts.  See  Scanning  Documents  Using Epson  Scan for details on  selecting
settings in  the  Epson  Scan  window.
Click  Scan. You see  a  preview  of your scan in  the  Document  Capture...

Home > Maintenance
Cleaning the Scanner
To  keep  your scanner  operating at its best, clean  it periodically using the  following procedure.
Caution:
Do not  press the  glass  surface inside  the  scanner  with  any  force.
Be careful  not  to  scratch  or  damage  the  glass  surface inside  the  scanner, and do  not  use a  hard or  abrasive
brush  to  clean  it.  A damaged  glass  surface can decrease the  scan quality.
Never use alcohol, thinner, or  corrosive solvent  to  clean  the  scanner. These...

Home > Maintenance
Cleaning Inside  the Scanner
Opening the  Scanner Cover
Cleaning  the  Glass Surface
Cleaning  the  Paper Path  Rollers
Cleaning  the  Separation  Pad
Cleaning  the  Paper Feed Roller
If scanned  images have  streaks or  if  scanned  documents become  dirty, clean  inside  the  scanner.
Caution:
Do not  press the  glass  surface inside  the  scanner  with  any  force.
Be careful  not  to  scratch  or  damage  the  glass  surface inside  the  scanner, and do  not  use a  hard or...

After opening the  scanner  cover,  see  the  following sections:Cleaning  the  Glass Surface
Cleaning  the  Paper Path  Rollers
Cleaning  the  Separation  Pad
Cleaning  the  Paper Feed Roller
When finished  cleaning,  close  the  input tray  and output tray.
Top
Cleaning the Glass  Surface
Open  the  scanner  cover.  See  Opening the  Scanner Cover for instructions. 

If the  glass  surface inside  the  scanner  gets  dirty, clean  it with  a  soft,  dry,  lint-free cloth. If the  glass  surface is stained  with  grease
or  some other hard-to -remove material,  use a  small  amount  of glass  cleaner  with  a  soft cloth  to  remove it.  Wipe off  all  remaining
liquid.
Caution:Do not  spray glass  cleaner  directly  on  the  scanner  glass.
Make  sure that  no  dust builds  up on  the  glass  surface inside  the  scanner. Dust  can cause abnormalities or  lines in...

Wipe off  all  remaining  liquid  with  a  soft,  dry,  lint-free cloth.
Make  sure that  the  rollers  are  completely dry  before using the  scanner.
Top
Cleaning the Separation Pad
Open  the  scanner  cover.  See Opening the  Scanner Cover for instructions.
Wipe the  separation pad  downward with  a  lint-free cloth  dampened with  water  and thoroughly  wrung  out.
Caution:
Be careful  not  to  get  the  cloth  caught  on  the  pick  spring.
Wipe off  all  remaining  liquid  with  a  soft,  dry,...

Caution:Be careful  not  to  scratch  or  damage  the  roller.
Wipe off  all  remaining  liquid  with  a  soft,  dry,  lint-free cloth.
Make  sure that  the  roller  is completely dry  before using the  scanner.
Top 

Home > Maintenance
Transporting the Scanner
If you  need  to  transport  your scanner  some distance,  carefully prepare and repack it as  described  below.
Turn  off  the  scanner, then unplug  the  AC adapter cord.
Disconnect all  the  cables  from the  scanner.
Remove all  paper from the  input tray.
Close the  input tray  and output tray.
Attach  the  packing materials that  came with  the  scanner, then repack the  scanner  in  its original  box  or  a  similar  box  that  fits  the
scanner  snugly.