Epson F3200 Manual

9
Appearance
Center of lens
* Distance from center of lens to suspension bracket fixing point
Units: mm
Center of lens 450131148.3
4.5
12.3
134.7
5-M4×9389.7 150 136
160 4575 300
5672
* 

10
Setting up
Adjusting the projection size
A*
B*90Ã
Screen size
Center of lens
Screen
Adjusting the projection size
Lens shift adjustment
When the projector is further away from the screen, the projection image size are larger.
While referring to the table below, position the projector so that the images are projected onto the 
screen at the optimum size.
The values should be used as a guide for setting up the projector.
When the projector is suspended from the ceiling
When the height of the projector...

11
Setting up
Installing the Projector
Projection methods
* When suspending the projector from a ceiling, 
change the configuration menu settings.       p.34
When projecting from a ceiling* If you place the projector off to the side, aim it 
straight ahead (rather than at the center of the 
screen), then use the  horizontal lens shift dial 
to center the image on the screen.
Configuration menu
Settings
Projection
Front
Front/Ceiling
Projection methods
TIP
You can rotate the EPSON logo plate around 180...

12
Connecting Image Sources
•Turn the power off for both the projector and the signal source before connecting them. 
If the power for either device is on at the time of connection, damage may result.
•Check the shapes of the cable connectors and the device ports before making the 
connections. If you try to force a connector to fit a device port with a different shape or 
number of terminals, a malfunction or damage to the connector or port may result.
The cables used will vary depending on the output...

13
Installing the Projector
Preparing the Remote Control
Inserting batteries into the remote control
Using the remote control
If delays in the responsiveness of the remote control occur or if it does not operate
after it has been used for some time, it probably means that the batteries are
becoming flat. When this happens, replace them with new batteries. Have two AA
size manganese or alkaline batteries ready. You cannot use other batteries except for
the AA size manganese or alkaline.
At the time of...

14
Starting and Stopping Projection
Turning the power on and projecting images
TIP
If you set the Direct Power On to On, the power of the unit will turn on when 
the main power switch is turned on, without having to press the power button of 
the remote control or the projectors control panel.      p.33 If there is a problem with projection even though the projector is set up and connected correctly, 
refer to       p.15, 37.
The projector is equipped with the Child Lock function that prevents young...

15
Starting and Stopping Projection
Basic Operations
When the expected images are not 
projected
Turning the power offWhen the expected images are not 
projected
Turning the power off
Simply pressing         or              does not stop 
electricity consumption.
If more than one signal source has been connected, or if no images are projected, use the remote control or the 
projectors control panel buttons to select the signal source. For video devices, press the [Play] button on the video 
equipment...

16
Adjusting the Projection Screen
Focus adjustment
Projection size adjustment (Zoom 
adjustment)
Projection image position adjustment 
(Lens shift)
If the projector cannot be set up directly in 
front of the screen, you can use the lens 
shift function to move the position of the 
projected images vertically or horizontally 
within the range shown at right. While 
turning the lens shift dials, the position 
where a click is heard is currently at about 
the middle of the shift range.
The image position...

17
Adjusting the Projection Screen
Basic Operations
Adjusting the tilt of the projector
Displaying a test pattern Adjusting the tilt of the projector
Displaying a test pattern
Extend
Extend Retract
Retract
When an image from the projector that is placed on a flat surface is tilting horizontally (           ), use the 
front feet to correct the tilt.
You can use a test pattern to make the first setup such as zoom, focus, and image position using the lens 
shift without connecting to any electrical...

18
Basic Image Quality Adjustments
Selecting the color mode
Selecting the aspect
 *If you press           , the Select menu 
disappears.
If you project an image that is 
compressed, enlarged or separated 
using the aspect function in public 
places such as a store or hotel for 
the purposes of profit-making or 
public display, it may result in 
infringing on the authors right that 
is protected by copyright law.
TIP
Selecting the color mode
Press                and select the 
color mode from the menu....