Epson F3200 Manual

About the Manuals and Notations Used
Types of Manual
The documentation for your EPSON projector is divided into the following two manuals. Refer to the 
manuals in the order given below.
Safety Instructions/Support and Service Guide
This manual contains information on using the projector safely, and also includes a guide for warranty 
service, and a troubleshooting check sheet.
Be sure to read this manual thoroughly before using the projector.
User’s Guide (this manual)
This Users Guide contains...

1
Checking the Components
When you unpack the projector, make sure that you have all these components.
If any of the components are missing or incorrect, please contact the place of purchase.
❏Projector (with lens cover)❏Remote control
❏Power cable (3.0m)
Connect to the projector and to a wall outlet.❏AA-size alkali batteries (2 pcs.)
Insert into the remote control.
❏Document CD-ROM
(Safety Instructions/Support and Service 
Guide, User’s Guide)
❏Quick Start Guide
Documentation 

2
Table of Contents
■Features of the Projector ............................. 4
■Part Names and Functions .......................... 6
Front / Top ........................................................... 6
Control panel ........................................................ 6Remote control .................................................... 7
Rear...................................................................... 8
Base ..................................................................... 8...

3
Table of Contents
Basic 
operation Appendix Troubleshooting Image Quality 
Adjustments Installing the 
projector Configuration 
Menu
Troubleshooting
■Problem Solving ........................................ 37
Reading the indicators ........................................37
•When the  (warning) indicator is lit or 
flashing ...............................................................37
•Indicator statuses in normal operation ..................38
When the indicators provide no help ....................

4
Features of the Projector
x.v.Color mode realizes more 
natural color reproduction
Image appearance can be selected to match the 
projection environment (Color Mode)
The optimum images for the location can be projected simply by selecting the desired color mode from the 
following five preset modes.       p.18
Color 
Mode
Dynamic
Living Room
Natural Cinema
If Natural, Cinema or x.v.Color is selected, the Epson Cinema Filter effect is applied automatically to 
increase the contrast and to make skin...

5
Features of the Projector
                 mode realizes more natural color reproduction
Sophisticated color adjustment
Equipped with 2.1x short throw zoom lens
In addition to the Color Mode, the absolute color temperature and skin\
 tones can be adjusted by simple 
procedures to render the picture even more to your own liking. Further, you can adjust gamma, the offset and 
gain for RGB colors, and the hue, saturation, and brightness of RGBCMY c\
olors, to create colors that match the 
image....

6
Part Names and Functions
Front / Top
Control panel
Buttons with no explanation function in the same way as the corresponding buttons on the remote
control. Refer to Remote control for further details on these buttons.
•Front adjustable feet p.17
Extend to adjust the projection angle 
so that the projector is horizontal 
when placed on a desk top.
•Side control panel
See below
•Air exhaust vent
A discharge outlet for the air 
which cools the inside of the 
projector.
•Remote control light-
receiving...

7
Part Names and Functions
Remote control
•Remote control light-emitting area p.13
Outputs remote control signals.
•Power button  p.14, 15
Turns the projector power on/off.
•Memory button p.24
Saves, loads, and erases memory 
contents.
•Default button  p.26
Restores default settings when 
menu is displayed.
•Enter/Line menu button 
p.18, 24
, 26
Displays the line menu.
While viewing a menu, press this 
button to select the menu item and 
proceed to the next display.
•     button
p.18, 20, 22, 26
Press to...

8
Part Names and Functions
Rear
Base
•[Trigger out] port
Outputs a 12-volt DC 
signal when the projector 
is turned on.
It is used to transmit the 
power status of this 
projector (on/off) to 
external equipment such 
as a motorized screen.
•[Video] input port  p.12
Connects to the Composite Video
 
output port of the video equipment.
•[HDMI1] input port* 
p.12
Connects to an 
HDMI
TM-compatible 
video source or to a 
computer.
•[S-Video] input port  p.12
Connects to the S-Video out ports 
of the video...