Epson EPL N2550D User Manual

Replacing Consumable Products221
9
9
9
9
9
9
9
9
9
9
9
9
6. Make sure that the two levers at either side of the fuser unit 
are moved up.
7. Close cover B.
8. Reconnect the interface cable and power cord, and then turn 
on the printer.
 

222Replacing Consumable Products 9. When the printer’s Ready light is on, press the Enter 
button to access the control panel menus.
10. Press the uUp or dDown button several times until 
Reset Menu appears on the control panel, and then press the 
Enter button.
11. Press the dDown button to display Reset Fuser Counter, 
and then press the Enter button.
 

Cleaning and Transporting the Printer223
10
10
10
10
10
10
10
10
10
10
10
10
Chapter 10 
Cleaning and Transporting the Printer
Cleaning the Printer
The printer needs only minimal cleaning. If the printer’s outer 
case is dirty or dusty, turn off the printer and clean it with a soft, 
clean cloth moistened with a mild detergent.
c
Caution:
Never use alcohol or paint thinner to clean the printer cover; these 
chemicals can damage the components and the case. Be careful 
not to get water onto the printer...

224Cleaning and Transporting the Printer 1. Turn the printer off and open Cover A slowly.
2. Hold the handle of the imaging cartridge and pull out.
Note:
Place the cartridge on a clean, flat surface.
 

Cleaning and Transporting the Printer225
10
10
10
10
10
10
10
10
10
10
10
10
3. Remove the two pick up rollers by bending their tabs slightly 
outwards while sliding them off the spindles.
4. With a clean damp cloth, wipe the pickup roller’s rubber 
parts.
* rubber parts
 

226Cleaning and Transporting the Printer 5. Reattach the pickup rollers as shown below. Then, fit the hook 
in the concave part of the shafts to fix them.
Note:
Fit the convex parts of the pickup rollers in the concave parts of the 
shaft.
6. Reinstall the imaging cartridge.
 

Cleaning and Transporting the Printer227
10
10
10
10
10
10
10
10
10
10
10
10
7. Close Cover A until it clicks shut.
Transporting the Printer
For long distances
If you need to transport your printer for long distances, carefully 
repack it using the original box and packing materials.
Follow these steps to repack your printer.
1. Turn off the printer.
2. Remove the following items:
❏Imaging cartridge
❏Power cord
❏Interface cables
❏Loaded paper
3. Remove all installed options. For information on removing...

228Cleaning and Transporting the Printer ❏If you are moving the printer on its own, two people should 
lift and carry the printer.
Moving the printer
Follow these steps to move the printer for a short distance. 
1. Turn off the printer and remove the following items: 
❏Power cord
❏Interface cable
2. Be sure to lift the printer by the correct positions as shown 
below.
3. When moving the printer, always keep it horizontal.
Moving the printer together with an optional lower paper 
cassette installed
Follow...

Cleaning and Transporting the Printer229
10
10
10
10
10
10
10
10
10
10
10
10
❏Power cord
❏Interface cable
2. Lift the printer together with the optional unit.
c
Caution:
Do not move the printer on angled or uneven surfaces.
Finding a place for the printer
When relocating the printer, always choose a location that has 
adequate space for easy operation and maintenance. Use the 
following illustration as a guide for the amount of space required 
around the printer to ensure smooth operation. Dimensions...

230Cleaning and Transporting the PrinterThe 550-Sheet Universal Paper Cassette Unit adds 95 mm (3.7 
in.) to the bottom of the printer. When two optional paper 
cassette units are installed, the printer requires 190 mm (7.4 
in.) more space beneath the printer.
The Duplex Unit adds 68.5 mm (2.7 in.) to the back of the 
printer.
In addition to space consideration, always heed the following 
precautions when finding a place to locate the printer:
❏Place the printer where you can easily unplug the power...