Epson EasyMP Monitor User Manual

An e-mail notifying the operator of a problem/warning/status is issued
41
The details contained in the e-mail message can consist of the following.
Message
Remedy
Easy Interactive 
Function ErrorStop using the projector, disconnect the power 
cable from the electrical outlet, and contact Epson. 
See your User's Guide for more information.
Internal Error
Fan error
Sensor error
Lamp Cover Open See your User's Guide for more information.
Lamp failure at power 
on
*
Lamp Error
*
Supply System Error...

An e-mail notifying the operator of a problem/warning/status is issued
42
* When the projector has 2 lamps, the additional information, such as (Lamp 
1) or (Ballast 1), is displayed after the message so that you can know which 
lamp has problems/warnings.Messages to inform that the projector has recovered from the error or 
warning statuses are sent.No signal No image signals are being received by the 
projector. Check the connection status and check 
that the power for the connected equipment is...

Application lock function
43
Application lock function
You can use the application lock to prevent third parties from operating 
the projectors using EasyMP Monitor and from changing settings 
without authority. Opening and closing EasyMP Monitor and status 
monitoring can still be carried out even when the application lock is 
applied.
In addition, when a password has been set, the password must be entered 
in order to cancel the application lock. This ensures that the application 
lock can not be...

44
Appendix 

Troubleshooting
45
TroubleshootingProjectors cannot be monitored or controlled
An e-mail message is not sent when a problem occurs 
with a projector
Cause
Remedy
Is the projector connected 
to the network correctly?Check that the network cable has been 
connected correctly. If the cable is not 
connected correctly, reconnect it.
Has the projector been set 
up correctly for 
connection to the 
network?Check the Network configuration settings.
See your User's Guide for more information.
Has EasyMP...

Uninstalling EasyMP Monitor
46
Uninstalling EasyMP Monitor
The following procedures to uninstall EasyMP Monitor vary depending 
on your operating system.
•If your operating system is Windows 2000 or Windows XP 
Click Start - (Settings) - Control Panel - Add/Remove Programs or 
Add or Remove Programs to uninstall EasyMP Monitor. To save or 
transfer the existing projector settings, make a copy of the EMP 
Monitor.dat file before you uninstall the software. s"Transferring 
the settings" p.7
•When...

General Notice
47
General Notice
All rights reserved. No part of this publication may be reproduced, stored 
in a retrieval system, or transmitted in any form or by any means, 
electronic, mechanical, photocopying, recording, or otherwise, without 
the prior written permission of Seiko Epson Corporation. No patent 
liability is assumed with respect to the use of the information contained 
herein. Neither is any liability assumed for damages resulting from the 
use of the information contained herein....