Epson EasyMP Monitor User Manual

Monitoring window layout
31
•Displaying the specified group properties
Right-click an icon in Grouping view and then select Property.
If you double-click in a line, the properties for that group or projector 
will be displayed.
Displaying Projector properties 
Right-click on a projector icon in Grouping view or Detail list view and 
select Property.A
Shows the projector's serial number. If hyphens are displayed, confirm 
the serial number on the label of the projector.
B
Displays the projector...

Monitoring window layout
32
Displaying and deleting logs
In your web browser, you can check a transmission log of content such as 
what has been controlled by EasyMP Monitor and projector errors. You 
can delete logs once you have checked them.
q
When Log output is set to On at Environment setup in the Tool menu, 
transmission logs are stored. The default setting is Off.
Displaying Log
Procedure
Select "Log" - "View" from the View menu.
The web browser will open and the communication logs...

Using the control functions
33
Using the control functionsCarrying out control using control buttons
Click the icon of a projector to be controlled in Grouping view or Detail 
list view, and click a control button to enable control of only that selected 
projector.
You can also enable control of all selected projectors by selecting more 
than one projector in Grouping view or Detail list view and clicking a 
control button. The methods of selecting more than one projector at the 
same time are as...

Using the control functions
34
The following table shows the meanings of the control buttons.
* If the button does not function, you can switch the input source using the 
 button.
q
•Some connected projectors may not be equipped with all of the above ports 
or functions. If you click a button for a port or function that is not 
available, nothing will happen. Power OnTurns the projector power on.
 Power OffTurns the projector power off.
 Switch source 
Computer1Switches the video input source to the...

Using the control functions
35
•You can select objects to be controlled and use the control buttons to carry 
out control operations even when the following are being displayed.
Group properties sp.30
Projector properties sp.31
Warning and Error Projector list
(Control operations can only be carried out for projectors with a warning 
status.) sp.27
Carrying out control using a web browser (Web 
control)
You can use the computer's web browser to change the configuration 
menu settings for projectors....

Using the control functions
36
The details that can be checked and operations that can be carried out at 
this time are given below.
A
Projectors
Selects a group or projector to check the status of.
When a group is selected, the timer setting statuses for all projectors 
in that group are displayed.
B
Date
Shows the current day in a red box.
Days for which timer settings have been made are shown in bold.
Click   or   to switch to the calendar for the previous or next 
month.
C
Timers
Shows a list of the...

Using the control functions
37
Procedures for new timer settings
ProcedureA
Click "Add" on the Timer Settings window. The following 
window is displayed and the new timer settings are applied.
At Operation, you can carry out the operations of turning the pow-
er on and off and switching the input sources, similarly for the con-
trol buttons on the main window. If you set the input source 
switching, the projector's power will turn on at the timer start time 
even if it is not on at the time....

Mail notification function settings
38
Mail notification function settings
The mail notification function can be used to send corresponding 
notification messages to a preset e-mail address when a projector that is 
connected to the network assumes a certain status, or if it experiences a 
problem or warning. By using this function, the operator can be notified 
of a projector’s status or problems even when the operator is in a 
different location from the projectors.
q
•Up to three addressees...

Mail notification function settings
39
C
Click "Notification event" and check the items for mail 
notification in the window that appears.
D
Click "OK".
The Set mail notification function window appears again.
Repeat Steps 3 and 4 to set the notification events for the other 
email addresses.
E
When the setup is complete, click "OK". 

An e-mail notifying the operator of a problem/warning/status is issued
40
An e-mail notifying the operator of a problem/warning/status is issued
If the projector experiences a problem or enters a status requiring 
attention, an e-mail like that shown below is sent to the address specified 
for Recipient mail address.
If there is more than one problem, warning, or status, the corresponding 
messages are output to separate lines.
Item
Details shown
E-mail subject [Display name displayed in Grouping view or...