Epson Brightlink 435wi Users Guide

Replace
thelamp assoon aspossible whenthefollowing occurs:
 •
The projected imagegetsdarker orstarts todeteriorate
 •
Amessage appearswhenyouturn onthe projector tellingyoutoreplace thelamp
 •
The projectors lamplightisflashing orange
 Replacing
theLamp
 Resetting
theLamp Timer
 Parent
topic:Projector Maintenance
 Related
references
 Optional
Equipment andReplacement Parts
 Projector
LampSpecifications
 Projector
Information Display-Info Menu
 Replacing
theLamp
 Before
youreplace thelamp, letthe...

3.
Use thescrewdriver includedwiththereplacement lamptoloosen thescrew securing thelamp
 cover.

Warning:
Ifthe lamp isbroken, glassfragments maybeloose inside thelamp chamber. Becareful
 removing
anybroken glasstoavoid injury.
 4.
Slide thelamp cover outand liftitoff.
 152   

5.
Loosen thescrews securing thelamp tothe projector. Thescrews donot come allthe way out.
 6.
Liftupthe lamp handle andgently pullthelamp outofthe projector.
 153   

Note:
Thelamp(s) inthis product containmercury. Pleaseconsult yourstate andlocal
 regulations
regardingdisposalorrecycling. Donot putinthe trash.
 7.
Gently insertthenew lamp intotheprojector. Ifitdoes notfiteasily, makesureitis facing theright
 way.
Press thehandle down.
 Caution:
Donot touch anyglass onthe lamp assembly toavoid premature lampfailure.
 154   

8.
Push inthe lamp firmly andtighten thescrews tosecure it.
 9.
Replace thelamp cover andtighten thescrew tosecure it.
 Note:
Besure thelamp cover issecurely installedorthe lamp willnot come on.
 155   

Reset
thelamp timer tozero tokeep trackofthe new lamp ’s usage.
 Parent
topic:Projector LampMaintenance
 Related
tasks
 Resetting
theLamp Timer
 Resetting
theLamp Timer
 You
must reset thelamp timer afterreplacing theprojectors lamptoclear thelamp replacement
 message
andtokeep trackoflamp usage correctly.
 Note:
Donot reset thelamp timer ifyou have notreplaced thelamp toavoid inaccurate lampusage
 information.

1.
Turn onthe projector.
 2.
Press theMenu button.
 3.
Select theReset menuandpress Enter....

Related
tasks
 Replacing
theLamp
 Replacing
theRemote ControlBatteries
 The
remote controlusestwoAAmanganese oralkaline batteries. Replacethebatteries assoon asthey
 run
out.
 Caution:
Useonly thetype ofbatteries specified inthis manual. Donot install batteries ofdifferent types,
 or
mix new andoldbatteries.
 1.
Open thebattery coverasshown.
 2.
Remove theoldbatteries.
 Warning:
Ifthe battery fluidhasleaked, wipeitaway withasoft cloth andavoid getting thefluid on
 your
hands. Ifitgets onyour hands,...

3.
Insert thebatteries withthe+and –ends facing asshown.
 4.
Close thebattery coverandpress itdown untilitclicks intoplace.
 Warning:
Disposeofused batteries according tolocal regulations. Donot expose batteries toheat
 or
flame. Keepbatteries outofthe reach ofchildren; theyarechoking hazards andarevery
 dangerous
ifswallowed.
 Parent
topic:Projector Maintenance
 Related
references
 Remote
ControlOperation
 158   

Replacing
thePen Batteries
 To
check thepen batteries, pressthebutton onthe pen. Ifthe indicator lightisgreen, thebatteries have
 enough
power.
 If
you need toreplace thebatteries, usetwoAAA rechargeable oralkaline batteries.
 Caution:
Useonly thetype ofbatteries specified inthis manual.
 1.
Press inthe tabonthe battery coverandliftthe cover off.
 2.
Remove theoldbatteries.
 Warning:
Ifthe battery fluidhasleaked, wipeitaway withasoft cloth andavoid getting thefluid on
 your
hands. Ifitgets onyour...

4.
Replace thebattery coverandpress itdown untilitclicks intoplace.
 Warning:
Disposeofused batteries according tolocal regulations. Donot expose batteries toheat
 or
flame. Keepbatteries outofthe reach ofchildren; theyarechoking hazards andarevery
 dangerous
ifswallowed.
 Parent
topic:Projector Maintenance
 Transporting
theProjector
 The
projector containsprecision parts,someofwhich areglass. Follow theseguidelines totransport or
 ship
theprojector safely:
 •
Remove anyequipment connectedtothe...