Epson Brightlink 435wi Users Guide

Setting
 Options
 Description

Net.
Info-Wireless LAN
 Connection
mode
 Displays
wirelessnetworkstatus
 and
details
 Antenna
level
 Projector
Name
 SSID

DHCP

IP
Address
 Subnet
Mask
 Gateway
Address
 MAC
Address
 Region
Code
 Net.
Info-Wired LAN
 Projector
Name
 Displays
wirednetwork status
 and
details
 DHCP

IP
Address
 Subnet
Mask
 Gateway
Address
 MAC
Address
 Network
Configuration
 Accesses
additional network
 Configures
yournetwork settings
 menus

Parent
topic:Adjusting theMenu Settings...

Note:
Available settingsdependonthe current inputsource. Thelamp usage timerdoesnotregister any
 hours
untilyouhave usedthelamp foratleast 10hours.
 Information
item
 Description

Lamp
Hours
 Displays
thenumber ofhours (H )the lamp hasbeen usedin
 Normal
andECO Power Consumption modes;ifthe information is
 displayed
inyellow, obtainagenuine Epsonreplacement lamp
 soon

Source
 Displays
thename ofthe port towhich thecurrent inputsource is
 connected

Input
Signal
 Displays
theinput signal setting ofthe...

Event
IDCode List
 Parent
topic:Adjusting theMenu Settings
 Related
concepts
 Projector
LampMaintenance
 Related
references
 Optional
Equipment andReplacement Parts
 Projector
LampSpecifications
 Event
IDCode List
 If
the Event IDoption onthe Info menu displays acode number, checkthislistofEvent IDcodes forthe
 solution
tothe projector problemassociated withthecode.
 Event
IDcode
 Cause
andsolution
 0432
 The
EasyMP NetworkProjection programdidnot start. Turntheprojector offand
 then
onagain.
 0435...

Event
IDcode
 Cause
andsolution
 0893
 The
WEP/TKIP/AES encryptiontypedoes notmatch. Makesurethewireless
 network
securitysettingsarecorrect.
 0894
 Communication
withunauthorized accesspointwasdisconnected. Contactyour
 network
administrator.
 0898
 Failed
toacquire DHCP.MakesuretheDHCP serverisoperating correctly.Ifyou
 are
notusing DHCP, turnoffthe DHCP setting inthe Network menus.
 0899
 A
communication errorhasoccurred. Tryrestarting theEasyMP NetworkProjection
 program
andrestarting...

•
Users Logo
 •
Language
 •
Network menuitems
 •
Lamp Hours
 •
Password
 •
Zoom
 Parent
topic:Adjusting theMenu Settings
 145 

Maintaining
andTransporting theProjector
 Follow
theinstructions inthese sections tomaintain yourprojector andtransport itfrom place toplace.
 Projector
Maintenance
 Transporting
theProjector
 Projector
Maintenance
 Your
projector needslittlemaintenance tokeep working atits best.
 You
may need toclean thelens periodically, andclean theairfilter andairvents toprevent theprojector
 from
overheating duetoblocked ventilation.
 The
only parts youshould replace arethelamp, airfilter, andremote...

•
To remove stubborn smudges, moistenasoft, lint-free clothwithlens cleaner andgently wipethelens
 or
receiver window. Donot spray anyliquid directly onthe lens orreceiver window.
 Warning:
Donot use alens cleaner thatcontains flammable gas.Thehigh heat generated bythe
 projector
lampmaycause afire.
 Caution:
Donot use glass cleaner toclean thelens orreceiver window, oryou may damage them.Do
 not
use canned air,orthe gases mayleave aresidue. Avoidtouching thelens orreceiver windowwith
 your
bare hands...

2.
Gently remove thedust using asmall vacuum designed forcomputers oravery softbrush (suchas
 a
paintbrush).
 Note:
Youcanremove theairfilter soyou canclean bothsides ofit.Do not rinse theairfilter in
 water,
oruse anydetergent orsolvent toclean it.
 Caution:
Donot use canned air,orthe gases mayleave aresidue.
 3.
Ifdust isdifficult toremove orthe airfilter isdamaged, replacetheairfilter.
 Parent
topic:AirFilter andVent Maintenance
 Replacing
theAirFilter
 You
need toreplace theairfilter inthe...

2.
Push thetabonthe airfilter cover andopen thecover.
 3.
Pull theairfilter outofthe projector.
 Note:
Airfilters contain polypropylene. Disposeofused airfilters according tolocal regulations.
 149   

4.
Place thenew airfilter inthe projector asshown.
 5.
Close theairfilter cover.
 Parent
topic:AirFilter andVent Maintenance
 Projector
LampMaintenance
 The
projector keepstrackofthe number ofhours thelamp isused anddisplays thisinformation inthe
 projectors
menusystem.
 150