Epson AcuLaser M2400D User Manual

Insufficient memory to print all copies
CauseWhat to do
The printer does not have sufficient memory to collate
print jobs.Only one set of copies will be printed. Reduce the contents of print
jobs, or add more memory. For information on installing more
memory, see “Memory Module” on page 63.
Paper Handling Problems
Paper does not feed properly
CauseWhat to do
The  paper  guides  are  not  set  correctly. Make sure that the paper guides in all the paper cassettes and the
MP tray are set to the correct...

CauseWhat to do
The optional paper cassette may not be installed
properly.See “Optional Paper Cassette Unit” on page 59 for instructions on
installing an optional paper cassette unit.
If the MP tray is being used, the MP tray’s pickup roller
may have come off.Check if the locking lever is in the unlocked position (down). For
the location of the locking lever and pickup roller, see “Inside the
printer” on page 22. 
If the locking lever is in the unlocked position (down), the pickup
roller may have come...

Correcting USB Problems
If you are having difficulty using printer with a USB connection, see if your problem is listed below,
and take any recommended actions.
USB connections
USB cables or connections can sometimes be the source of USB problems.
For best results, you should connect the printer directly to the computer’s USB port. If you must use
multiple USB hubs, we recommend that you connect the printer to the first-tier hub.
Windows operating system
Your computer must have one of the operating...

If About is displayed in the shortcut menu that appears, click it. If a message box with the words
“Unidrv Printer Driver” appears, you must reinstall the printer software as described in the Setup
Guide. If About is not displayed, the printer software has been installed correctly.
Note:
❏For Windows 2000, if the Digital Signature Not Found dialog box appears during the installation
process, click Yes. If you click No, you will have to install the printer software again.
❏For Windows Vista, Vista x64,...

Server OS Client OS Additional Driver
Windows 2000 Windows XP or 2000 clients Intel Windows 2000
Windows XP
*Windows XP or 2000 clients Intel Windows 2000 or XP
Windows XP x64 clients x64 Windows XP
Windows XP x64, Server 2003, or
Server 2003 x64
*Windows XP or 2000 clients x86 Windows 2000, Windows XP and
Windows Server 2003
Windows  XP  x64  clients x64 Windows XP and Windows Server
2003
Windows 7, Vista, Vista x64, Server
2008, Server 2008 x64, or Server 2008
R2Windows 7, Vista, XP, or 2000 clients...

Note:
How the lights change depends on an error type. Ignore this mark.
Reset
Explanation:
The printer’s current interface has been reset and the buffer has been cleared. However, other
interfaces are still active and retain their settings and data.
Form Feed
Explanation:
The printer is ejecting paper due to a user request. This warning appears when pressing the Start/Stop
button once to make the printer offline, then holding down the Start/Stop button for more than 2
seconds in order not to receive form...

Ready
Explanation:
The printer is ready to receive data and print.
Offline
Explanation:
The printer is not ready to print.
Press the Start/Stop button.
Cover Open
Explanation:
The cover on the printer is open.
Close the cover.
Print Data Error
Explanation:
The print data is deleted because it is incorrect.
Make sure the appropriate printer driver are used.
Insufficient Memory to Print All Copies
Explanation:
Printing by the specified number of copies is no longer possible due to insufficient memory...

Insufficient Memory for Current Task
Explanation:
The printer has insufficient memory to complete the current print job.
Press the Information button on the control panel to clear the warning. To cancel the print job, use your
computer to delete it from the print queue. 
To prevent this problem from recurring, add more memory to your printer as described in “Memory
modules” on page 156, or reduce the resolution of the image to be printed.
Self Test
Explanation:
The printer is currently performing a self...

Check Paper Type
Explanation:
The paper loaded in the printer does not match the paper type setting in the printer driver.
Load the correct type of paper into the printer. To clear the warning, press the Information button on
the control panel.
ROM check
Explanation:
The printer is checking the ROM.
Cancel Print Job
Explanation:
The printer is canceling the current print job.
Wait until the cancellation is finished.
Cancel Print Job (by host)
Explanation:
The print job is canceled at the printer driver....

Write Error ROM
Explanation:
This warning indicates an internal error in the printer.
Reset the printer. If this error persists, consult your dealer.
Installed Toner Cartridge is Not a Genuine Epson Product
Explanation:
The installed toner cartridge is not a genuine Epson product.
Installing a genuine toner cartridge is recommended. Using a non-genuine toner cartridge may affect
print quality. Epson shall not be liable for any damages or problems arising from the use of consumable
products not...