Epson AcuLaser M2300DN User Manual

Safety Instructions
Warnings, Cautions, and Notes
w
Warnings
must be followed carefully to avoid bodily injury.
c
Cautions
must be observed to avoid damage to your equipment.
Notes
contain important information and useful tips on the operation of your printer.
Important Safety Instructions
Setting up the printer
❏Be sure to lift the printer by the correct positions as shown below.
❏If you are unable to insert the AC plug into the electrical outlet, contact an electrician.
❏Be sure the AC power cord meets...

❏Use a grounded outlet that matches the printer’s power plug. Do not use an adapter plug.
❏Avoid using an electrical o u t l e t  t h a t  i s  c o n t r o l l e d  b y  w a l l  s witches or automatic timers. Accidental
disruption of power can erase valuable information in your computer’s and printer’s memory.
❏Make sure that there is no dust on the socket.
❏Be sure to insert the plug completely into the electrical outlet.
❏Do not handle the plug with wet hands.
❏Unplug this printer from the wall outlet...

Finding the place for the printer
When relocating the printer, always choose a location that has adequate space for easy operation and
maintenance. Use the following illustration as a guide for the amount of space required around the
printer to ensure smooth operation.
a 20 cm
b 20 cm
c 30 cm
d 50 cm
e 30 cm
To install and use any of the following options, you will need the indicated amount of additional
space.
A 250-Sheet Paper Cassette Unit adds 10 cm (3.9 in.) to the bottom of the printer.
In addition...

❏Do not put your printer where the cord will be stepped on.
❏Do not use printer in a damp environment.
❏Avoid locations that are subject to direct sunlight, excessive heat, moisture, oil vapor, or dust.
❏Do not place the printer on an unstable surface.
❏Slots and openings in the cabinet and the back or bottom are provided for ventilation. Do not
block or cover them. Do not put the printer on a bed, sofa, rug, or other similar surface or in a
built-in installation unless proper ventilation is provided....

❏Do not insert your hand deep into the fuser unit as some components are sharp and may cause
injury.
❏Never push objects of any kind through cabinet slots as they may touch dangerous voltage points
or short out parts that could result in a risk of fire or electric shock.
❏Do not sit or lean on the printer. Do not put heavy objects on the printer.
❏Do not use any kind of combustible gases in or around the printer.
❏Never force the printer’s components into place. Although the printer is designed to be...

❏Be sure to keep consumable products and maintenance parts out of the reach of children.
❏When handling a toner cartridge, always place it on a clean, smooth surface.
❏Do not attempt to modify a toner cartridge or take it apart.
❏Do not touch the toner. Always keep toner away from your eyes. If toner gets on your skin or
clothes, wash it off with soap and water immediately.
❏If toner is spilled, use a broom and dustpan or a damp cloth with soap and water to clean it up.
Because the fine particles can...

Safety Information
Laser safety labels
w
Warning:
The performance of procedures and adjustments other than those specified in the printer’s
documentation may result in hazardous radiation exposure. Your printer is a Class 1 laser
product as defined in the IEC60825 specifications. A label similar to the one shown below is
attached to the back of printers in countries where required.
Internal laser radiation
There is a Class III b Laser Diode Assembly that has an invisible laser beam inside the printer...

Ozone exposure limit
The Epson laser printer generates less than 3 mg/h of continuous printing.
Minimize the risk
To minimize the risk of exposure to ozone, you should avoid the following conditions:
❏Use of multiple laser printers in a confined area
❏Operation in conditions of extremely low humidity
❏Poor room ventilation
❏Long, continuous printing together with any of the above
Printer location
The printer should be located so that the exhaust gases and heat generated are:
❏Not blown directly into the...

Chapter 1
Getting to Know Your Printer
Where to Find Information
Setup Guide
Provides you with information on assembling the printer and installing the printer software.
User’s Guide (this manual)
Provides you with detailed information on the printer’s functions, optional products, maintenance,
troubleshooting, and technical specifications.
Network Guide (only for the DN model)
Provides network administrators with information on both the printer driver and network settings.
Font Guide
Provides you with...

Printer Parts
Front view
a. top cover (cover A)
b. control panel
c. standard lower paper cassette
d. MP tray (Multi-Purpose tray)
e. subtray
f. stopper
Rear view
D model
Epson AcuLaser M2300/M2310/M2400/M2410 Series     User’s Guide
Getting to Know Your Printer     20