Epson AcuLaser M2000D User Manual

Output Paper Jam
Control panel: Ready and Error lights on
Indicates that there may be a paper jam inside the printer. Open the printer’s output cover, remove
any jammed paper, and close the cover. The error will automatically clear itself and the jammed
page’s print data is reprinted.
Paper Jam
Control panel: Ready and Error lights on
Indicates that there may be a paper jam inside the printer. Open the printer’s front cover, remove
any jammed paper, and close the cover. The error will automatically clear...

Either the installed developer cartridge is defective, or it is not the right one for your printer
model. Replace it with a new or correct developer cartridge by following the instructions under
“Developer Cartridge” on page 69.
Installed Developer Cartridge is Not a Genuine Epson Product
Control panel: Ready light on, Error light flashing
The installed developer cartridge is not a genuine Epson product. The use of such products may
damage the printer and cause the print quality to decrease. Remove the...

Output Cover Open
Control panel: Ready and Error lights on
The printer’s output cover is open. Make sure that the printer’s output cover is closed properly by
opening and closing it again.
Printing on Incorrect Paper Size
Control panel: Ready light on, Error light flashing
The paper loaded in the paper source does not match the required paper size. Replace with paper
of the correct size and click Continue on the EPSON Status Monitor 3 window that appears. If
you want to change printer driver settings,...

Paper Size Warning
Control panel: Ready light on
The size of the paper that fed through the printer does not match the specified paper size. Click
Close on the EPSON Status Monitor 3 window that appears to dismiss the warning.
Not All Pages Are Printed
Control panel: Ready light on
This warning is displayed if an Insufficient Memory to Print Current Page error has occurred
while Auto Continue is set to On. Click Close on the EPSON Status Monitor 3 window that
appears to dismiss the warning.
Warming Up...

This is a warning to inform you that the installed developer cartridge is not a genuine Epson
product. The use of such products may damage the printer and cause the print quality to decrease.
Remove the currently installed cartridge and replace it with a genuine Epson cartridge by
following the instructions under “Developer Cartridge” on page 69.
To temporarily dismiss the warning, click Close on the EPSON Status Monitor 3 window that
appears.
Sleep mode
Control panel: Ready light on
Indicates that the...

AcuLaser M1200/EPL-6200L
For Windows users
Follow these steps to print a status sheet from the printer driver:
1. Click Start, point to Settings, and then click Printers.
2. Right-click the icon of your printer, and then click Properties in the menu that appears.
3. Click the Optional Settings tab, and then click Status Sheet. The printer starts printing a
status sheet.
For Macintosh users
For Mac OS X 10.5 users
1. Open System Preferences, and click the Print & Fax icon.
2. Select your printer from the...

Clearing Jammed Paper
When paper is jammed in the printer, the EPSON Status Monitor 3 provides alert messages.
Precautions for clearing jammed paper
Be sure to observe the following points when you clear jammed paper:
❏Do not remove jammed paper by force. Torn paper can be difficult to remove and might cause
other paper jams. Pull it gently in order to avoid tearing.
❏Always try to remove jammed paper with both hands to avoid tearing it.
❏If jammed paper is torn and remains in the printer, or if paper is...

Note:
The illustrations used in this procedure show the EPL-6200.
1. Close the output tray.
2. Open the printer’s front cover by placing your fingers on the grooves on both sides of the cover
as shown below, and then pull the cover towards you.
EPSON AcuLaser M1200 Series     User’s Guide
Troubleshooting     98
 

3. Remove the developer cartridge.
c
Caution:
❏When removing the developer cartridge, never touch the developing roller under the
flap; otherwise, print quality may decline.
❏Never touch the photoconductor unit’s light-sensitive drum; otherwise, print quality
may decline.
EPSON AcuLaser M1200 Series     User’s Guide
Troubleshooting     99
 

4. Carefully remove the paper from the paper path with both hands.
Note:
If the paper is difficult to pull out because only a small portion of the paper is visible, see “Paper
jam — output cover” on page 100.
5. Reinstall the developer cartridge.
6. Close the printer’s front cover.
Printing automatically restarts from the page that jammed. If the Error light continues flashing
after removing all jammed paper, open and close the printer’s front cover again to clear the error.
Paper jam — output cover
If...