Epson Aculaser CX28DN User Manual

About the Control Panel 19
3 Scan data desti-
nationIndicates the specified destination for the scan data. 
For details on specifying the destination of the data, 
refer to “Specifying the Data Location” on page 159 
and “Specifying the Destination Address (Scan to 
E-mail/FTP/SMB)” on page 161.
If no destination has been specified, SCAN 
TO
 appears.
4 Single-sided/
double-sided 
scanningIndicates whether double-sided scanning or sin-
gle-sided scanning is selected. For details on select-
ing...

About the Control Panel 20
9UTILITYSelect this menu item to change the various 
machine settings. For details, refer to “UTILITY 
Menu” on page 25.
This menu item does not appear if an e-mail 
address, FTP address or SMB address was 
specified as the destination.
10
REPORT/STA-
TUSSelect this menu item to view the total number of 
pages printed by this machine as well as to print the 
reports. For details, refer to “REPORT/STATUS 
Menu” on page 22.
This menu item does not appear if an e-mail 
address,...

About the Control Panel 21
Print Screen
When a print job is received, PRINTER: Printing appears in the status 
section of the main screen. To display the print screen (as shown below), 
press the * key while 
PRINTER: Printing is displayed.
To cancel printing, press the Stop/Reset key when the print screen appears. 
Press the Select key to select 
YES.
No. Indication Description
1 Status Displays messages indicating operations such as 
printing.
2 Media tray/
media sizeIndicates the media tray and media...

Checking the Machine Status and Settings 22
Checking the Machine Status and Settings
TONER REMAINING
With the main screen displayed, press the * key to display the TONER 
REMAINING screen. From this screen, a general estimate of the amount of 
toner remaining in the toner cartridges can be viewed.
To return to the main screen, press the Back key.
If the Select key is held down for at least 2 seconds while the screen 
described above is displayed, the configuration page will be printed.
REPORT/STATUS...

Checking the Machine Status and Settings 23
TOTAL PRINT
The total number of pages for each of the following can be checked.
SUPPLY STATUS
The remaining amount of toner in the toner cartridges and the remaining ser-
vice life of the imaging units can be displayed as a percentage.
TOTAL PRINTThis counter shows the total number of pages 
printed.
MONO COPYThis counter shows the total number of pages 
copied in black-and-white.
COLOR COPYThis counter shows the total number of pages 
copied in color.
MONO...

Checking the Machine Status and Settings 24
TX RESULT
The transmission history of Scan To E-mail, Scan To SMB, and Scan To FTP 
can be displayed. 
For details, refer to “Specifying the Destination Address (Scan to E-mail/FTP/
SMB)” on page 161.
REPORT
The machine settings, lists and reports related to scanning can be printed.
TX RESULT REPORTPrints the result of the latest scan.
FAVORITE LISTPrints a list of the destinations registered in the 
favorite list.
ADDRESS LISTPrints a list of the address...

Configuration Menu Overview 25
Configuration Menu Overview
To display the settings menu for this machine, select UTILITY in the main 
screen, and then press the Select key. From the UTILITY menu, settings for 
the various machine functions can be changed.
In addition, Copy mode settings can be specified for PS/PCL printing and 
memory direct printing. For details, refer to “PS/PCL PRINT Menu” on page 
55 and “MEMORY PRINT Menu” on page 86.
UTILITY Menu
From this menu, various machine settings can be...

Configuration Menu Overview 26
* This menu item appears when ADMIN. MANAGEMENT/CAMERA 
DIRECT
 is set to ENABLE.
SCAN SETTING
DIRECT PRINT
*
 

Configuration Menu Overview 27
MACHINE SETTING Menu
MACHINE SETTING AUTO PANEL RESET
PREHEAT MODE
ENERGY SAVE MODE
LCD CONTRAST
KEY SPEED TIME TO START
INTERVAL
LANGUAGE
LAMP OFF TIME
LAMP WARMUP TIME
TONER EMPTY
TONER NEAR EMPTY
I-UNIT NEAR EMPTY
 

Configuration Menu Overview 28
Manufacturer’s default settings appear in bold.
AUTO CONTINUE
CALIBRATION
AUTO PANEL RESETSettingOFF / 30sec / 1min / 2min / 
3min / 4min / 5min
Specify the length of time until all settings that 
have not been programmed, such as the num-
ber of copies, are cleared and return to their 
default settings when no operation is performed.
To set the machine to perform the auto panel 
reset operation, select from 30sec, 1min, 2min, 
3min, 4min or 5min for the length of time...