Home > Epson > Printer > Epson Aculaser CX28DN User Manual

Epson Aculaser CX28DN User Manual

Here you can view all the pages of manual Epson Aculaser CX28DN User Manual. The Epson manuals for Printer are available online for free. You can easily download all the documents as PDF.

Page 101

3Media Handling
 

Page 102

Print Media 90
Print Media
Specifications
Media Media Size Tray* Duplex Copy Print
Inch Millimeter
A4 8.2 x 11.7 210.0 x 297.0 1/2/3 Yes Yes Yes
B5 (JIS) 7.2 x 10.1 182.0 x 257.0 1/2/3 Yes Yes Yes
A5 5.9 x 8.3 148.0 x 210.0 1/2 No Yes Yes
B6 7.2 x 5.0 182.0 x 128.0 1/2 No No Yes
A6 10.1 x 4.1 257.0 x 105.0 1/2 No No Yes
Legal 8.5 x 14.0 215.9 x 355.6 1/3 Yes Yes Yes
Letter 8.5 x 11.0 215.9 x 279.4 1/2/3 Yes Yes Yes
Statement 5.5 x 8.5 139.7 x 215.9 1/2 No Yes Yes
Executive 7.25 x 10.5 184.2 x 266.7 1/2/3...

Page 103

Print Media 91 Types
Before purchasing a large quantity of special media, do a trial print with the 
same media and check the print quality.
Keep media on a flat, level surface in its original wrapper until it is time to 
load it.
Plain Paper (Recycled Paper)
Use plain paper that is
„Suitable for plain paper printers and copiers, such as standard or recycled 
office paper.
Note
Do not use the media types listed below. These could cause poor print 
quality, media misfeeds, or damage to the machine.
DO NOT...

Page 104

Print Media 92
„Designed specifically for inkjet printers (such as superfine paper, glossy 
film, and postcards)
„Already been printed on by another printer or copier
„Dusty
„Wet (or damp)
Keep media between 15% and 85% relative humidity. Toner does 
not adhere well to moist or wet media.
„Layered 
„Adhesive
„Folded, creased, curled, embossed, warped, or wrinkled
„Perforated, three-hole punched, or torn 
„Too slick, too coarse, or too textured 
„Different in texture (roughness) on the front and back...

Page 105

Print Media 93
DO NOT use thick stock that is
„Mixed with any other media in the trays (as this will cause media misfeed-
ing)
Envelope
Print on the front (address) side only. Some parts of the envelope consist of 
three layers of paper—the front, back, and flap. Anything printed in these lay-
ered regions may be lost or faded.
You can print continuously with envelope. However, this could affect the 
media feed, depending on the media quality and printing environment. If 
problems occur, stop the...

Page 106

Print Media 94
DO NOT use envelopes that have
„Sticky flaps
„Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for seal-
ing
„Transparent windows
„Too rough of a surface
„Material that will melt, vaporize, offset, discolor, or emit dangerous fumes
„Been presealed
Label
A sheet of labels consists of a face sheet (the printing surface), adhesive, and 
a carrier sheet:
„The face sheet must follow the plain paper specification.
„The face sheet surface must cover the entire carrier sheet,...

Page 107

Print Media 95
Labels may stick to the fuser, causing them to peel off and media 
misfeeds to occur.
„Are precut or perforated
Letterhead
You can print continuously with letterhead. However, this could affect the 
media feed, depending on the media quality and printing environment. If 
problems occur, stop the continuous printing and print one sheet at a time.
Try printing your data on a sheet of plain paper first to check placement.
Postcard
You can print continuously with postcard. However, this could...

Page 108

Print Media 96
Use postcards that are
„Approved for laser printing
DO NOT use postcards that are
„Coated
„Designed for inkjet printers
„Precut or perforated
„Preprinted or multicolored
If the postcard is warped, press on the warped 
area before putting it in the tray.
„Folded or wrinkled
Transparency
Do not fan transparencies before loading them. Resulting static elec-
tricity may cause printing errors.
If you touch the face of the transparencies with your bare hands, print 
quality may be affected....

Page 109

Print Media 97
You can print continuously with transparencies. However, this could affect the 
media feed, depending on the media quality, static buildup, and printing envi-
ronment.
Try printing your data on a sheet of plain paper first to check placement.
If you have problems feeding 20 sheets, try loading only 1–10 sheets 
at a time. Loading a large number of transparencies at one time may 
cause static buildup, causing feeding problems.
Always first test a small quantity of a particular type of...

Page 110

Print Media 98
DO NOT use glossy media that is
„Mixed with any other media in the trays (as this will cause media misfeed-
ing)
„Specified for inkjet printers only Driver 
Media TypeGlossy 1
Glossy 2
DuplexingNot supported
 
Start reading Epson Aculaser CX28DN User Manual

Related Manuals for Epson Aculaser CX28DN User Manual

All Epson manuals