Epson AcuLaser CX11NFT User Manual
Have a look at the manual Epson AcuLaser CX11NFT User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Accessing the Setup Menu71 To go back a level, press the l button. An ✽ asterisk appears next to the selected value. You can select the following settings from the Setup menu. 4. To exit Setup mode: ■Press the Copy, Fax, or Scan button to switch to the corresponding mode. ■Press the Setup button again to switch to Print mode. Menu Descriptions Note: Some menus and items appear only when an optional device is installed or another setting has been selected. Information This menu lets you check the toner level and the remaining service life of consumable products. You can also print status and sample sheets showing the printer’s current settings, available fonts, and a brief summary of available features. Setup submenuAvailable menu items Printer Settings Information (see below) Tray (see page 72) Setup (see page 73) Reset (see page 74) Host I/F Settings USB Settings (see page 75) Network Settings (see the Network Guide for details) Fax Settings (CX11NF) See the Fax Guide for details Copy Settings Copy Function Settings Copy Factory Settings Scan Settings Carriage Lock (returns the scanner to the locked position)
72Using the Control Panel Press the u or d button to select an item. Press the r button to print a sheet or font sample. 1 Appears only when the network interface board is installed 2 Display only Tray Menu This menu lets you specify the size and type of paper you loaded in the MP tray and the type of paper you loaded in the optional Paper Cassette. It also displays the size of paper in the cassette. ItemSettings Description Status Sheet – Prints a status sheet, showing current printer settings and installed options Network Status Sheet (Information) 1– Prints a sheet showing working status of the network C Toner 2E****F Displays the amount of cyan toner left in the toner cartridge M Toner 2E****F Displays the amount of magenta toner left in the toner cartridge Y Toner 2E****F Displays the amount of yellow toner left in the toner cartridge K Toner 2E****F Displays the amount of black toner left in the toner cartridge Photocon 2E****F Remaining service life of the photoconductor unit Total Pages 20 to 99999999 Total number of pages printed by the CX11N Color Pages 20 to 99999999 Total number of color pages printed by the CX11N B&W Pages 20 to 99999999 Total number of black and white pages printed by the CX11N Item Settings Description MP Tray Size A4, A5, B5, LT (Letter), HLT (Half Letter), LGL (Legal), GLT (Government Letter), GLG (Government Legal), EXE (Executive), F4, Mon (Monarch), C10, DL, C5, C6, IB5 (ISO B5)Select your paper size for the MP tray LC1 Size A4, LT (Letter) Displays the paper size loaded in the standard and optional paper cassettes.
Accessing the Setup Menu73 Setup Menu This menu lets you select various basic configuration settings and select the LCD screen language. MP Type Plain, SemiThk (Semi-thick), Letterhead, Recycled, Color, Trnsprncy (Transparency), LabelsSelect the paper type you loaded in the MP tray. LC1 Type Plain, SemiThk (Semi-thick), Letterhead, Recycled, ColorSelect the paper type you loaded in the standard and optional paper cassettes. ItemSettings Description Lang (Display Language)English, French, German, Italian, Spanish, Swedish, Danish, Dutch, Finnish, Portuguese, Simplified Chinese, Traditional Chinese, KoreanSpecifies the language displayed in the LCD screen and on the printed status sheet Time to sleep 5, 15, 30, 60, 120, 180 min.Specifies the number of minutes of inactivity before the CX11N goes into sleep mode MP Mode On, Off (Normal, Last) Determines whether the MP tray has higher or lower priority when Auto is selected as the Paper Source setting in the printer driver. When you select On (Normal), the MP tray has higher priority. When you select Off (Last) , the MP tray has lower priority. Size Ignore Off, On The CX11N usually stops printing when a paper size error occurs. If you want to ignore a paper size error, select On so printing can proceed even if the image size exceeds the printable area for the paper size. This may cause smudges to appear due to the toner being improperly transferred onto the paper. Auto Cont (Auto Continue)Off, On The CX11N usually stops printing if a Paper Set, Print Overrun, or Memory Overflow error occurs and you must press the xB&W Start or xColor Start button to resume printing. When you turn on Auto Cont, the CX11N automatically continues printing after these errors. Item Settings Description
74Using the Control Panel Reset Menu This menu lets you cancel printing and reset the printer settings. LCD Contrast 0 to 15 Adjusts the contrast of the LCD screen. Use the u and d buttons or the numeric keypad to set the contrast between 0 (lowest contrast) and 15 (highest contrast.) Time Setting (CX11NF only)MM/DD/YY, HH/MM Specifies the date and time used in fax communications. The letters MM, DD, YY, HH, and MM indicate the Month, Date, Year, Hour, and Minute respectively. To specify the date and time use the u and d buttons, or numeric keypad. Date Format (CX11NF only)DD/MM/YY, MM/DD/YY, YY/MM/DDSpecifies the display format for the Time Setting. The letters DD, MM, and YY indicate the Date, Month, and Year respectively. ItemDescription Clear Warning Clears every warning message, except for consumable products or mandatory-replacement parts. Clear All Warnings Clears all warning messages that appear on the LCD screen. Reset Stops printing and clears the current job. You may want to reset when there is a problem with a print job and you cannot print. Restart Unit Restarts the printer. Factory Settings Restores the printer settings to their original factory settings. Change toner C/M/Y/K Moves the selected toner cartridge into position so that it can be replaced. See page 83. Reset Fuser Counter Resets the fuser unit service life counter after you have replaced the fuser unit. ItemSettings Description
Accessing the Setup Menu75 USB Menu These settings control communication between the CX11N and the computer when they are connected using a USB interface. Some items may not appear unless corresponding devices are installed. After these settings are changed, the new settings don’t take effect until after a reset or after the power is turned off and on again, even though it is shown on the Status Sheet. Network Menu These settings control communication with the CX11N when it is connected to a computer network. Item Settings USB I/F On, Off USB Speed HS, FS Item Settings Network I/F On, Off Network Config No, Yes If Yes is selected then Get IPAddress, IP, SM GW, Appletalk, MS Network, Rendezvous, and Link Speed appear as available settings in the Network menu. Get IPAddress Panel, Auto, PING IP (IP address)* 0.0.0.0 to 255.255.255.255 SM (Subnet mask) 0.0.0.0 to 255.255.255.255 GW (Gateway address) 0.0.0.0 to 255.255.255.255 AppleTalk On, Off MS Network On, Off Rendezvous On, Off Link Speed Auto, 100 Full, 100 Half, 10 Full, 10 Half
76Using the Control Panel Copy Settings To access this menu, press the Setup button, press the u or d button to select Copy Settings, then press the r button. This menu lets you reset just the copy settings to their default or factory settings. Printing a Status Sheet To confirm the current status of the CX11N and verify that options are installed correctly, you may want to print a status sheet. 1. Make sure the CX11N is turned on. 2. Press the Setup button. The Setup light turns on and the Setup menu appears. 3. Make sure Printer settings is selected, then press the r button. The Printer settings menu appears. 4. Make sure Information Menu is selected, then press the r button. 5. Press the d button to select Status Sheet, then press the r button. The Data light flashes, the status sheet starts printing, and the LCD screen displays Printing. If options are installed correctly, they appear under Hardware Configurations. If they are not listed, try reinstalling them and make sure they are securely connected. If you cannot print a status sheet, contact Epson as described on page 128. Item Description Copy Function Settings Changes the copy settings to their default values. Copy Factory Settings Changes the copy settings to their factory values.
Canceling Printing, Scanning, or Copying77 Canceling Printing, Scanning, or Copying You can cancel printing, scanning, or copying, using the yCancel button or the Reset menu. Using the Cancel Button The yCancel button is the quickest and easiest way to cancel printing, scanning, or copying. Press the button once to cancel the current job. Press and hold the button for more than three seconds to delete all jobs from memory, including jobs the CX11N is currently receiving or printing. Using the Reset Menu Selecting Reset from the Setup menu stops printing, clears the print job being received from the active interface, and clears errors that may have occurred. 1. Press the Setup button. 2. Make sure Printer settings is selected, then press the r button. 3. Press the d button several times until Reset is selected, then press the r button. 4. Press the d button twice to select Reset. 5. Press the r button. Printing is canceled, the Print mode screen appears, and you can now send a new print job.
Maintenance79 Maintenance 7 This chapter describes the parts of the product, how to replace the toner cartridges and photoconductor, how to clean the CX11N, and how to order more toner. Identifying the Product Parts Auto Document Feeder (CX11NF only) Cover (CX11NF only)Paper stopper (CX11NF only) Output tray Extension tray Control panel Cover A MP trayCover C Cover B Option cover Power switch
80Maintenance Cover F Handle AC inlet Cover E USB connector Network interface connector Telephone interface connectors (CX11NF only) Cleaner cover Fuser Paper guides (MP tray) Photoconductor access lever Photoconductor Cleaning knob access lever Toner cartridge