Epson AcuLaser C9100B User Manual

Using the Printer Software with Windows71
3
3
3
3
3
3
3
3
3
3
3
3
4. Select the Form Overlay check box, then click Overlay 
Settings. The Overlay Settings dialog box appears.
1
2
 

72Using the Printer Software with Windows 5. Select Create Overlay Data, then click Settings. The Form 
Settings dialog box appears.
2
1
 

Using the Printer Software with Windows73
3
3
3
3
3
3
3
3
3
3
3
3
6. Select the Use Form Name check box, then click Add Form 
Name. The Add Form dialog box appears.
1
2
 

74Using the Printer Software with Windows 7. Type the form name in the Form Name box and its 
description in the Description box.
8. Select To Front or To Back to specify whether the overlay will 
be printed as background or foreground of the document.
9. Click Register to apply the settings and return to Form 
settings dialog box.
10. Click OK in the Form Settings dialog box.
11. Click OK in the Overlay Settings dialog box.
12. Print the file saved as overlay data. It is possible to save any 
kind of...

Using the Printer Software with Windows75
3
3
3
3
3
3
3
3
3
3
3
3
Printing with an overlay
Follow the steps below to print a document with overlay data.
1. Open the file to print with overlay data.
2. From the application, access the printer driver. Open the File 
menu, choose Print or Print Setup, then click Printer, Setup, 
Options, Properties, or a combination of these buttons, 
depending on your application.
3. Click the Special tab.
4. Select the Form Overlay check box, and click Overlay 
Settings...

76Using the Printer Software with Windows
Different printer settings overlay data
The overlay data is made with the current printer settings (such 
as Resolution: 600 dpi). If you want to make the same overlay with 
different printer settings (such as 300 dpi), follow the instructions 
below.
1. Re-access the printer driver as described in step 2 in “Creating 
an overlay” on page 70.
2. Make the printer settings and exit the printer driver.
3. Send the same data that you made by application to the...

Using the Printer Software with Windows77
3
3
3
3
3
3
3
3
3
3
3
3
❏When the document’s resolution, paper size or paper orientation 
settings are different from the form overlay data that you use, you 
cannot print the document with the form overlay data.
❏This function is available in the ESC/Page mode.
Register the form overlay data on the Hard Disk Drive
Only a network administrator using Windows XP, 2000, NT 4.0, 
or Server 2003 is allowed to register the form overlay data on the 
optional Hard Disk...

78Using the Printer Software with WindowsNote:
If you need the list of the registered form data, click Print List to print 
it and confirm the form name.
Also, if you need a sample print-out of the form data, enter the form 
name, then click Print Sample.
5. Select To Front or To Back to print the form data as 
background or foreground of the document, then click OK to 
return to the Special menu.
6. Click OK to print data.
Delete the form overlay data on the Hard Disk Drive
Only a network administrator...

Using the Printer Software with Windows79
3
3
3
3
3
3
3
3
3
3
3
3
Printing with the duplex unit
Duplex printing prints on both sides of the paper. When printing 
for binding, the binding edge can be specified as required to 
produce the desired page order.
As an 
ENERGY STAR® partner, Epson recommends the use of 
the double-sided printing function. Refer to 
ENERGY STAR® 
Compliance for more information on the ENERGY STAR® 
program.
1. Click the Layout tab.
2. Select the Duplex check box, then select...

80Using the Printer Software with Windows 3. Click Duplex Settings to open the Duplex Settings dialog box.
4. Specify the Binding Margin for the front and back sides of the 
paper, then select whether the front or back side of the paper 
is to be printed as the Start Page.
5. When printing for binding as a booklet, select the Binding 
Method check box and make appropriate settings. For details 
about each setting, see online help.
6. Click OK to apply the settings and return to the Layout menu.
Making...