Epson AcuLaser C4200DN User Manual

Paper Handling41
3
3
3
3
3
3
3
3
3
3
3
3
Chapter 3 
Paper Handling
Paper Sources
This section describes the combinations of paper sources and 
paper types that you can use.
MP tray
Paper Type Paper Size Capacity
Plain paper
Weight: 60 to 105 
g/m²A4, A5, B5, Letter (LT),
Half-Letter (HLT),
Executive (EXE),
Government Legal (GLG),
Legal (LGL),
Government Letter (GLT), 
F4
Custom-size paper:
88.9 
× 139.7 mm minimum
220  × 355.6 mm maximum Up to 150 sheets
(Total thick stack: 
up to 15 mm)
Envelopes...

42Paper Handling
Standard lower paper cassette
550-sheet/1100-sheet Paper Cassette Unit
Extra thick paper
Weight: 164 to 216 
g/m²A4, A5, B5, Letter (LT),
Half-Letter (HLT),
Executive (EXE),
Government Letter (GLT)
Custom-size paper:
88.9 
× 139.2 mm minimum
220  × 355.6 mm maximum Up to 15 mm thick 
stack
Semi-Thick/EPSON 
Color Laser Paper 
Weight: 82 g/m² A4 Up to 150 sheets
(Total thick stack: up 
to 15 mm)
EPSON Color Laser 
Transparencies
Weight: 140 g/m² A4, Letter (LT) Up to 15 mm thick 
stack...

Paper Handling43
3
3
3
3
3
3
3
3
3
3
3
3
Selecting a paper source
You can specify a paper source manually, or set the printer to 
select the paper source automatically.
Manual selection
New :with  c
ontrol p
anel/including
 information a
bout MacYou can use the printer driver or the printer’s control panel to 
select a paper source manually.
To access the printer driver, for Windows, see Accessing the 
printer driver on page 61, or for Macintosh, see Accessing the 
printer driver on page 146.
And to use...

44Paper Handling
You can use the printer driver or the printer’s control panel to 
select a paper source containing the appropriate size of paper 
automatically.
To access the printer driver, for Windows, see Accessing the 
printer driver on page 61, or for Macintosh, see Accessing the 
printer driver on page 146.
And to use the printer’s control panel, see Using the Control 
Panel Menus on page 214.
Using the printer driver:
❏
For Windows:
Access the printer driver, click the  Basic Settings tab, and...

Paper Handling45
3
3
3
3
3
3
3
3
3
3
3
3
MP tray
Lower Cassette 1
Lower Cassette 2
Lower Cassette 3
With 550-sheet Paper Cassette Unit and 1100-sheet Paper 
Cassette Unit installed:
MP tray
Lower Cassette 1
Lower Cassette 2
Lower Cassette 3
Lower Cassette 4
Note:
❏ If you make paper size settings or paper source settings in your 
application, these settings may ov erride the printer driver settings.
❏ If you select an envelope for the Pap er Size setting, it can be fed only 
from the MP tray regardless...

46Paper Handling
MP tray
Follow the steps below to load paper into the MP tray.
1. Open the MP tray.
2. Pull out the expansion tray on the MP tray to accommodate the size of the paper you want to load.
 

Paper Handling47
3
3
3
3
3
3
3
3
3
3
3
3
3. Load a stack of the desired paper with the printable surface down, then slide the guides against the sides of the stack to 
get a snug fit.
Note:
❏When loading the media, insert the short edge first.
❏ When printing on DL size envelopes, load them with the long 
edge first.
❏ Do not load media that exceeds the maximum stack height.
❏ After loading paper, set the  MP Tray Size setting to match the 
loaded paper size on the control panel.
❏ To print on the back...

48Paper Handling
The paper sizes and types supported by the optional paper 
cassette units are the same as the standard lower cassette unit. For 
more information, see 550-sheet/1100-sheet Paper Cassette Unit 
on page 42.
The paper-loading procedure is the same for the standard lower 
cassette and the optional paper cassette unit.
In addition to plain paper, you can also use special media such as 
EPSON Color Laser Paper in the paper cassettes.
Follow these steps to load paper into the standard and...

Paper Handling49
3
3
3
3
3
3
3
3
3
3
3
3
2. Slide the left and right paper guides to accommodate the paper you are loading.
Note:
When you use A4 or Letter (LT) size paper, adjust the width by 
moving the adjuster on the side of the cassette. When using Letter 
(LT), Legal (LGL), or Government Legal (GLG) size paper, set the 
adjuster to the arrow marked 8.5.
 

50Paper Handling
3. Pinch the knob and rear paper guide together, then slide the 
guide to the position appropriate for the size of paper you 
want to load.
Note:
❏Load the paper after aligning th e edges of the paper carefully.
❏ Do not load paper that exceeds the maximum stack height.
4. To prevent the sheets from sticking together, fan a stack of  paper. Then tap the edge on a firm surface to line it up.
Note:
If your printouts are curled or do not stack properly when using 
plain paper, try turning...