Epson AcuLaser C2800DTN User Manual

AcuLaser C2800 Series Users Guide
Using the Control Panel161
PCL Menu
These settings are available in the PCL mode.
*1Available only when downloaded fonts are available.
*2Depending on the font that has been selected.
*3Depending on whether Letter (60) or A4 (64) paper has been selected.
FontSource
Sets the default font source.
Font Number
Sets the default font number for the default font source. The available number depends on the 
settings you made.
Pitch
Specifies the default font pitch if the font is...

AcuLaser C2800 Series Users Guide
Using the Control Panel162
Height
Specifies the default font height if the font is scalable and proportional. You can select from 4.00 to 
999.75 points, in 0.25-point increments. This item may not appear depending on the Font Source 
or Font Number settings.
SymSet
Selects the default symbol set. If the font you selected in Font Source and Font Number is not 
available in the new SymSet setting, the Font Source and the Font Number settings are 
automatically replaced...

AcuLaser C2800 Series Users Guide
Using the Control Panel163
PS3 Menu
This menu allows you to make settings which affect the printer when it is in the PS3 mode.
*Available only when connected via Network interface.
Error Sheet
When you select On, the printer prints out an error sheet when an error occurs in the PS3 mode or 
when the PDF file you tried to print is not a supported version.
Coloration
Allows you to select the color printing or black-and-white printing mode.
Image Protect
The printer employs...

AcuLaser C2800 Series Users Guide
Using the Control Panel164
When this setting is set to On, you cannot use TBCP (Tagged binary communication protocol) in the 
printer driver settings.
Text Detection
When you select On, the text file is converted to a PostScript file when printing. This setting is 
available only when you select PS3 in the Emulation Menu.
PDF Page Size
Specifies the paper size when you send the PDF file directory from a computer or some other 
device. If Auto is selected, the paper size...

AcuLaser C2800 Series Users Guide
Using the Control Panel165
Font
Selects the font.
Pitch
Selects the pitch (the horizontal spacing) of the font in fixed pitch, measured in cpi (characters per 
inch). You can also choose proportional spacing.
Condensed
Turns condensed printing on or off.
T. Margin
Sets the distance from the top of the page to the baseline of the first printable line. The distance is 
measured in inches. The smaller the value, the closer the printable line is to the top.
Text
Sets the...

AcuLaser C2800 Series Users Guide
Using the Control Panel166
Auto LF
If you select Off, the printer does not send an automatic line-feed (LF) command with each 
carriage-return (CR). If On is selected, a line-feed command is sent with each carriage-return. Select 
On if your text lines overlap.
Bit Image
The printer is able to emulate the graphics densities set with the printer commands. If you select 
Dark, the bit image density is high, and if you select Light, the bit image density is low.
If you...

AcuLaser C2800 Series Users Guide
Using the Control Panel167
FX Menu
This menu allows you to make settings which affect the printer when it is in the FX emulation 
mode.
* Depending on whether Letter (62) or A4 (66) paper has been selected.
Font
Selects the font.
Pitch
Selects the pitch (the horizontal spacing) of the font in fixed pitch, measured in cpi (characters per 
inch). You can also choose proportional spacing.
Condensed
Turns condensed printing on or off.
T. Margin
Sets the distance from the top...

AcuLaser C2800 Series Users Guide
Using the Control Panel168
Text
Sets the page length in lines. For this option, a line is assumed to be 1 pica (1/6 inch). If you change 
the Orientation, Page Size, or T. Margin settings, the page length setting automatically returns to 
the default for each paper size.
CG Table
Use the character generator (CG) table option to select the graphics character table or the italics 
table. The graphics table contains graphic characters for printing lines, corners, shaded...

AcuLaser C2800 Series Users Guide
Using the Control Panel169
I239X Menu
The I239X mode emulates IBM® 2390/2391 Plus commands.
These settings are available only when the printer is in the I239X mode.
*1Depends on whether Letter (63) or A4 (67) paper has been selected.
*2Depends on whether Letter (1) or A4 (2) paper has been selected.
Font
Selects the font.
Pitch
Selects the pitch (the horizontal spacing) of the font in fixed pitch, measured in cpi (characters per 
inch). You can also choose proportional...

AcuLaser C2800 Series Users Guide
Using the Control Panel170
Text
Sets the page length in lines. For this option, a line is assumed to be 1 pica (1/6 inch). If you change 
the Orientation, Page Size, or T. Margin settings, the page length setting automatically returns to 
the default for each paper size.
Auto CR
Specifies whether the printer performs a carriage-return/line-feed (CR-LF) operation whenever 
the printing position goes beyond the right margin. If this setting is off, the printer does not...