Epson AcuLaser C1750N User Manual

12. Press the  button.
The next digit is selected.
13. Repeat steps 11 to 12 to enter all of the digits in the IP address, and then press the 
 button.
14. Press the 
 (Back) button, and then ensure that IP Address is selected.
15. Select Network Mask, and then press the 
 button.
The cursor is located at the first digit of the network mask.
16. Enter the value of the network mask using the 
 or  button.
17. Press the 
 button.
The next digit is selected.
18. Repeat steps 16 to 17 to set network mask,...

Note:
When you use IPv6 mode for network printing, you cannot use the Printer Setting Utility to assign an IP
address.
1. Click start — All Programs — EPSON — EPSON Printer Software — EPSON AL-C1750N /
EPSON AL-C1750W — Printer Setting Utility.
Note:
The Select Printer window appears in this step, when multiple print drivers are installed on your
computer. In this case, click the name of the desired printer listed in Printer Name.
The Printer Setting Utility appears.
2. Click the Printer Maintenance...

To verify if the printer is active on the network, run the ping command in your computer:
1. Click start, and select Run.
2. Enter cmd, and then click OK.
A black window is displayed.
3. Enter ping xx.xx.xx.xx (where xx.xx.xx.xx i s the IP ad d ress of your printer), and then press the
Enter key.
4. Reply from the IP address denotes printer is active on the network.
See Also:
“Printing and Checking the Printer Settings Page” on page 33
Printing and Checking the Printer Settings Page
Print the Printer...

1. Click start — All Programs — EPSON — EPSON Printer Software — EPSON AL-C1750N /
EPSON AL-C1750W — Printer Setting Utility.
Note:
The Select Printer window appears in this step, when multiple print drivers are installed on your
computer. In this case, click the name of the desired printer listed in Printer Name.
The Printer Setting Utility appears.
2. Click the Printer Settings Report tab.
3. Select Information Pages from the list at the left side of the page.
The Information Pages page is displayed....

3. Select Printer Settings, and then press the  button.
The Printer Settings page is printed.
4. Find the IP address under Network Setup/Wireless Setup on the Printer Settings page.
If the IP address is 0.0.0.0, wait for a few minutes to resolve the IP address automatically, and then
print the Printer Settings page again.
If the IP address is not resolved automatically, see “Assigning an IP Address (for IPv4 Mode)” on
page 30.
The Printer Setting Utility
1. Click start — All Programs — EPSON — EPSON...

❏Windows Server 2008 R2
❏Windows Server 2008
❏Windows XP
The following procedure uses Windows XP as an example.
1. Click start — Help and Support.
Note:
For Windows Vista, Windows Server 2008, Windows Server 2008 R2 and Windows 7 operating
systems, if you use Online Help, switch to Offline Help on Windows Help and Support window.
2. In the Search box, enter firewall and then press the Enter key.
In the list, click Turn Windows Firewall on or off and then follow the instructions on the screen.
Enable the...

4. If you agree to the terms of the SOFTWARE LICENSE AGREEMENT, select Agree and then click
Next.
The Easy Install Navi launches.
5. Click Installing Drivers and Software.
6. Select Personal Installation (USB), and then click Next.
7. Follow the on-screen instructions.
The Plug and Play installation starts and the installation software proceeds to the next page
automatically.
8. Click Finish to exit the wizard.
When the Printer is not Connected to Computer With a USB Cable
1. Turn off the printer.
2....

7. Follow the on-screen instructions to connect the computer and the printer with the USB cable, and
then turn on the printer.
8. Click Finish to exit the wizard.
9. Proceed the Plug and Play installation.
USB Printing
A personal printer is a printer attache d  t o  y o u r  c o m p u t e r  o r  a  p r i n t  s e r v e r  u s i n g  a  U S B .  I f  y o u r  p r i n t e r
is attached to a network and not your computer, see “Network Connection Setup” on page 38.
Network Connection Setup
1. Insert the...

If you have installed this printer on the server computer, select I am setting up this printer on a
server check box.
Note:
When using AutoIP, 0.0.0.0 is displayed in the installer. Before you can continue, you must enter a
valid IP address.
7. Specify the printer settings, and then click Next.
a Enter the printer name.
b
If you want other users on the network to access this printer, select Share this printer with
other computers on the network, and then enter a share name that users can identify.
c
If...

Item Specification
Data Transfer Rate IEEE 802.11b mode: 11, 5.5, 2, 1 Mbps
IEEE 802.11g mode: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
IEEE 802.11n mode: 65 Mbps
Security 64 (40-bit key)/ 128 (104- bit key) WEP, WPA- PSK (TKIP, AES), WPA2-PSK (AES)
(IEEE802.1x attestation function of WPA 1x non-corresponds)
Certifications Wi-Fi, WPA2.0 (Personal)
Wi-Fi Protected Setup (WPS) Push Button Configuration (PBC), Personal Identification Number (PIN)
You can select a method to configure a wireless setting from the...